Introduction
Thank you for choosing the GDFStudio 63" Faux Marble Dining Table. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new dining table. Please read these instructions carefully before assembly and retain them for future reference.
Image: GDFStudio 63-inch Faux Marble Dining Table with white top and black base.
Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before using the table. Periodically check and re-tighten as needed.
- Do not stand or sit on the table.
- Keep small parts away from children during assembly to avoid choking hazards.
- Do not exceed the maximum weight capacity of 350 pounds.
- Use caution when moving the table to prevent injury or damage. Lift, do not drag.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (Faux Marble MDF)
- Table Legs (Rubber Wood) - 2 units
- Assembly Hardware (screws, washers, etc.)
- Installation Tool (Allen wrench, etc.)
- Assembly Guide (this document)
Setup and Assembly
Follow these steps to assemble your dining table:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface like a carpet or blanket to prevent scratches.
- Identify Parts: Refer to the included parts list and diagrams to identify each component.
- Attach Table Legs: Position the tabletop upside down on your protected surface. Align the pre-drilled holes on the table legs with the corresponding holes on the underside of the tabletop.
- Secure Legs: Using the provided hardware (screws, washers) and the installation tool, securely attach the table legs to the tabletop. Do not overtighten initially.
- Final Tightening: Once all legs are in place, gradually tighten all screws until they are firm. Avoid overtightening to prevent damage to the wood.
- Upright the Table: With assistance, carefully flip the table upright.
- Adjust Foot Pads: The table is equipped with adjustable foot pads. Turn these pads to level the table and prevent wobbling on uneven floors.
Image: Underside view illustrating leg attachment.
Operating and Usage
This GDFStudio dining table is designed for indoor use in dining rooms, kitchens, or living areas. It comfortably accommodates 6-8 people.
- Seating Capacity: The table is designed to seat 6 to 8 individuals comfortably.
- Weight Distribution: Distribute weight evenly across the tabletop. Avoid placing heavy objects on one concentrated area.
- Surface Protection: While the faux marble top is durable, using placemats, coasters, and hot pads is recommended to protect against spills, heat, and scratches.
Image: The dining table in a typical usage environment.
Maintenance
Proper care will extend the life and appearance of your dining table.
- Faux Marble Top: Wipe clean with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture. Promptly wipe up spills to prevent staining.
- Rubber Wood Legs: Clean with a soft, dry cloth. Avoid direct sunlight and extreme temperature changes to prevent warping or cracking.
- General Care: Periodically check and tighten all hardware to ensure stability.
Image: Details of the faux marble top, rounded corners, and adjustable foot pads for easy care and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table wobbles | Uneven floor or loose hardware. | Adjust the foot pads on the bottom of the legs until the table is stable. Check and tighten all assembly screws. |
| Scratches on tabletop | Sharp objects or abrasive cleaning. | Use placemats and coasters. Avoid dragging objects across the surface. For minor scratches, consult a furniture repair specialist. |
| Loose connections | Hardware has loosened over time. | Periodically check and re-tighten all bolts and screws using the provided tool. |
Specifications
- Model: 358061
- Brand: GDFStudio
- Dimensions (L x W x H): 63" x 35.43" x 29.92" (160 cm x 90 cm x 76 cm)
- Item Weight: 120.6 pounds (54.7 kg)
- Maximum Weight Recommendation: 350 pounds (158.7 kg)
- Tabletop Material: MDF with Faux Marble Finish
- Frame Material: Rubber Wood
- Color: White+Black
- Shape: Rectangular
- Seating Capacity: 6-8 people
- Included Components: Assembly Guide, Installation Tool
Image: Detailed dimensions and weight capacity of the dining table.
Warranty
GDFStudio products are manufactured with quality and care. For specific warranty details, please refer to the warranty information provided at the time of purchase or contact GDFStudio customer support. Keep your proof of purchase for any warranty claims.
Support
For assistance with assembly, missing parts, or any other inquiries regarding your GDFStudio dining table, please contact our customer support team.
- Website: www.gdfstudio.com
- Email: Refer to your purchase documentation for specific contact email.
- Phone: Refer to your purchase documentation for specific contact number.
Please have your model number (358061) and proof of purchase ready when contacting support.
