Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Benass Large Metal Chicken Coop, 10x13FT Spire Top. Designed to accommodate 10-20 chickens, this durable enclosure offers a secure and comfortable environment for your poultry. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The Benass Large Metal Chicken Coop, 10x13FT, fully assembled in an outdoor setting.
Safety Information
Always prioritize safety during assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all components are securely fastened before use.
- Do not allow children to climb on or play inside the coop unsupervised.
- Wear appropriate safety gear (gloves, eye protection) during assembly.
- Place the coop on level ground to prevent instability.
- Regularly inspect the coop for any signs of wear, damage, or loose parts.
- Keep small children and pets away from the assembly area.
Image: Illustration of the coop's robust construction, including galvanized iron pipe, 3-layer strong steel wire gauze, and 120g PE&UV coated cloth, designed to keep poultry safe from predators.
Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Galvanized Steel Frame Components (various pipes and connectors)
- 1 Roll of PVC Coated Chicken Wire (39.3" x 118')
- 2 Pieces Doubled-Sided Polyethylene UV Coated Covers
- 1 Roosting Ladder
- 30 Bungee Balls
- 400 Detachable Zip Ties
Image: A visual representation of the complete accessory kit, including bungee balls, wire fencing mesh, detachable zip ties, PE&UV coated cover, and a chicken roosting ladder.
Setup and Assembly Instructions
Assembly requires at least two adults. Follow these general steps for construction. Refer to the included diagram for specific component placement.
- Prepare the Site: Choose a level, stable area for the coop. Clear any debris or obstacles.
- Assemble the Frame: Connect the galvanized steel pipes according to the provided diagrams to form the base, sides, and spire top structure. Ensure all connections are secure.
- Attach Wire Mesh: Unroll the PVC coated chicken wire and secure it to the frame using the detachable zip ties. Ensure the mesh is taut and covers all open sides to prevent escape or intrusion.
- Install Covers: Position the two doubled-sided polyethylene UV coated covers over the spire top frame. Secure them using the bungee balls to protect against rain and UV radiation.
- Install Roosting Ladder: Place the roosting ladder inside the coop in a suitable location for your poultry.
- Final Inspection: Double-check all connections, mesh, and covers to ensure they are properly installed and secure.
Image: Diagram illustrating the product dimensions: Overall Size: 157"x117.6"x78.72", Door Size: 23.6"x 63", Wire Mesh Size: 39.3"x118ft, Cover Area: 129ft².
Image: Close-up view of the reinforced corner connections, highlighting the sturdy construction of the coop frame.
Operating Instructions
This section outlines the daily use and features of your chicken coop.
- Accessing the Coop: The coop features a split door design with 3 U-shaped locks. You can open the entire door or just the upper or lower section for convenient access.
- Feeding and Watering: Utilize the split door for easy feeding and refilling water dispensers without fully entering the enclosure.
- Environmental Protection: The PE&UV coated covers provide shade from the sun and protection from rain, ensuring your poultry remains comfortable and dry. Adjust the number of covers based on weather conditions.
- Poultry Roosting: The included roosting ladder provides a designated area for chickens to perch, promoting natural behavior and comfort.
- Versatile Use: Beyond poultry, this enclosure can also protect garden vegetables and plants from animal damage.
Image: A person demonstrating the unique two-door design, highlighting the 3 U-shaped locks that allow for split or full door opening for easier feeding and access.
Image: The chicken coop repurposed to protect garden vegetables and plants from being damaged by poultry, showcasing its multiple uses.
Maintenance
Regular maintenance ensures the longevity and safety of your Benass chicken coop.
- Cleaning: Periodically clean the interior and exterior of the coop. Remove accumulated droppings and old bedding. Use animal-safe cleaning solutions.
- Cover Care: Inspect the PE&UV coated covers for tears or damage. Clean them gently with water and mild soap if necessary. Ensure they are securely fastened, especially during windy conditions.
- Wire Mesh Inspection: Regularly check the PVC coated chicken wire for any breaks, rust, or loose sections. Repair or replace damaged sections promptly to maintain security.
- Frame Integrity: Inspect the galvanized steel frame for rust, bending, or loose connections. Tighten any loose bolts or connections as needed.
- Door Mechanism: Ensure the split doors and U-shaped locks operate smoothly and securely. Lubricate hinges if they become stiff.
Image: The PE&UV double-sided coating cover effectively shielding chickens from both rain and direct sunlight, preventing them from getting wet or sunburned.
Image: A close-up view of water droplets on the PE&UV coated cover, demonstrating its waterproof properties.
Troubleshooting
Refer to this section for solutions to common issues.
| Problem | Possible Cause | Solution |
|---|---|---|
| Coop feels unstable or wobbly. | Uneven ground; loose frame connections. | Ensure the coop is on level ground. Tighten all frame bolts and connections. |
| Wire mesh is sagging or has gaps. | Insufficient zip ties; damaged mesh. | Add more zip ties to secure the mesh tightly. Repair or replace any damaged sections of wire. |
| Covers are not staying in place. | Bungee balls are loose or missing; strong winds. | Ensure all bungee balls are securely attached. Consider additional anchoring in very windy conditions. |
| Door is difficult to open/close or does not latch. | Misalignment; debris in hinges; damaged U-shaped locks. | Check for obstructions. Lubricate hinges. Inspect U-shaped locks for damage and replace if necessary. |
Specifications
| Model Number | B-JL-3x4-2 |
| Brand | Benass |
| Overall Dimensions (L x W x H) | 13.1'L x 9.8'W x 6.56'H (approx. 157.2"L x 117.6"W x 78.72"H) |
| Door Size | 5.25'H x 2'W |
| Material | Alloy Steel (1" Galvanized Steel Frame, 1mm PVC Coated Steel Wire) |
| Cover Material | 120gms Doubled-Sided Polyethylene UV Coated Cloth |
| Capacity | Accommodates 10-20 chickens |
| Special Features | Roosting Perch, Split Doors with U-shaped locks, UV/Rain Protection Covers |
| Target Species | Chicken, Ducks, Rabbits, Pigeons, Cats (also suitable for protecting plants) |
Warranty and Support
For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Benass stands behind the quality of its products.
For customer support, missing parts, or technical assistance, please visit the official Benass store on Amazon or contact their customer service directly. You can find the Benass store at: Benass Store on Amazon.