Introduction
The AquaVault SoundCharge is a versatile 2-in-1 device designed to provide both portable power and high-fidelity audio. It combines a 5,000 mAh MagSafe-compatible battery pack with a Hi-Fi Bluetooth speaker, offering a compact solution for charging your devices and enjoying music on the go. This manual provides essential information for the proper setup, operation, and maintenance of your SoundCharge device.
Image: The AquaVault SoundCharge, illustrating its dual functionality as a MagSafe battery pack and a portable Bluetooth speaker.
What's in the Box
- AquaVault SoundCharge Device
- USB Charging Cable (Type-C)
- Magnetic Rings (for non-MagSafe devices)
- Alignment Template (for magnetic rings)
- User Manual
Setup
- Initial Charging
Before first use, fully charge your AquaVault SoundCharge. Connect the provided USB Type-C cable to the charging port on the device and plug the other end into a compatible USB power adapter (not included). The LED indicators will illuminate to show the charging status. A full charge typically takes approximately 2 hours.
- Attaching to MagSafe-Compatible Devices
For MagSafe-compatible phones or cases, simply align the SoundCharge with the MagSafe area on the back of your device. The strong magnets will securely snap the SoundCharge into place, initiating wireless charging automatically.
Image: The AquaVault SoundCharge demonstrating magnetic alignment and attachment to a smartphone for wireless charging.
- Bluetooth Pairing
To connect the speaker function to your mobile device:
- Press and hold the power button on the SoundCharge until the Bluetooth indicator light begins to flash, indicating it is in pairing mode.
- On your mobile device, navigate to the Bluetooth settings menu.
- Select "AquaVault SoundCharge" from the list of available devices.
- Once successfully connected, the Bluetooth indicator light on the SoundCharge will remain solid.
- Magnetic Ring Installation (for non-MagSafe devices)
If your phone or phone case is not MagSafe compatible, use the included magnetic rings and alignment template to enable magnetic attachment and wireless charging. Follow the instructions provided with the magnetic rings for precise and secure placement on your device or case.
Operating Instructions
- Wireless Charging Your Device
Once the SoundCharge is securely attached to a MagSafe-compatible phone or a phone with an installed magnetic ring, wireless charging will commence automatically. The device supports wireless charging speeds from 5W to 15W, depending on the capabilities of your phone.
Image: A user holding a smartphone with the AquaVault SoundCharge attached, indicating active wireless charging.
- Using the Speaker Functions
- Power On/Off: Press and hold the power button to turn the speaker on or off.
- Volume Control: Use the '+' and '-' buttons located on the device to adjust the speaker volume.
- Playback Control: The play/pause button can be used to play or pause audio playback.
- Answering Calls: When connected via Bluetooth, press the play/pause button to answer an incoming call or end an ongoing call.
- Stereo Pairing (Optional)
If you possess two AquaVault SoundCharge units, they can be paired together to create a stereo sound experience. Refer to the specific instructions for stereo pairing provided with your device or consult the AquaVault support resources for detailed guidance on this feature.
Maintenance
- Keep the AquaVault SoundCharge clean and dry. Wipe the exterior with a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Protect the device from extreme temperatures, direct sunlight, and high humidity.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage.
- Store the device in a cool, dry place when not in use.
Troubleshooting
| Problem | Solution |
|---|---|
| Device not charging | Ensure the USB Type-C cable is securely connected to both the SoundCharge and a functional power source. Try a different cable or power adapter. |
| Phone not charging wirelessly | Verify your phone is MagSafe compatible or has a magnetic ring properly installed. Ensure the SoundCharge is correctly aligned with your phone's charging area. Remove any thick phone cases that may interfere with wireless charging. |
| Bluetooth not connecting | Ensure the SoundCharge is in Bluetooth pairing mode (flashing indicator light). Turn off and then on Bluetooth on your mobile device. Try forgetting the "AquaVault SoundCharge" device in your phone's Bluetooth settings and re-pairing. |
| Poor sound quality | Ensure the SoundCharge is within the effective Bluetooth range of your mobile device. Check for any physical obstructions between the devices. Adjust the volume on both the SoundCharge and your mobile device. |
Specifications
| Feature | Detail |
|---|---|
| Brand | AquaVault |
| Model | SoundCharge |
| Battery Capacity | 5000 Milliamp Hours |
| Connector Type | Wireless |
| Special Feature | Wireless Charging |
| Voltage | 3.85 Volts |
| Power Source | Battery |
| Amperage | 3 Amps |
| Number of Ports | 2 |
| Output Current | 3 Amps |
| Battery Charge Time | 2 Hours |
| Compatible Devices | iPhone (and other Qi2/MagSafe compatible phones) |
| Item Weight | 4.1 Ounces |
| Item Dimensions (L x W x Th) | 2.4" x 3.75" x 2.25" |
| Color | Black |
| UPC | 610655261819 |
Warranty Information
The AquaVault SoundCharge is covered by a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please visit the official AquaVault website or contact our customer support team. Detailed contact information can typically be found on the product packaging or the AquaVault official website.
