BrickSoul Light Kit for Lego Ford Model T 11376 Building Set

1. Introduction

This manual provides instructions for the BrickSoul Light Kit, designed to enhance the Lego Ford Model T 11376 building set. This kit adds lighting features, including touch control and dimming capabilities, to transform your model into a display piece. Please read these instructions carefully before installation and use.

Note: The Lego Ford Model T 11376 building set is not included with this light kit and must be purchased separately.

2. Safety Information

• The components of this light kit are very small. Exercise caution to prevent loss or accidental ingestion, especially around children.
• Avoid pulling wires too forcefully during installation to prevent damage.
• Ensure the power source is a safe 5V USB connection. Do not use power sources with higher voltage.
• Keep the kit away from water and high humidity.

3. Package Contents

Verify that all the following items are included in your package:

• BrickSoul LED Light Kit components
• USB Power Cable
• Battery Box (AAA batteries not included)
• Installation Guide / Instruction Manual
• Tweezers (for precise placement)
• Light Control Button

Figure 3.1: Overview of included components in the BrickSoul Light Kit package. The image displays the main product box, a light control button, sealed bags containing various light components, a printed instruction manual, a pair of tweezers, and a battery box (AAA batteries not included).

4. Setup & Installation

The BrickSoul Light Kit is designed for easy installation, even for beginners. Detailed video and PDF instructions are provided to guide you through each step. The light components are designed with hidden cables to integrate seamlessly with your Lego model.

4.1 Preparation

• Ensure your Lego Ford Model T 11376 building set is fully assembled or disassembled to the necessary extent for light integration.
• Gather all light kit components and the provided tweezers.
• Insert AAA batteries (not included) into the battery box, or prepare a 5V USB power source.

4.2 Installation Steps

1. Refer to the detailed instruction manual (PDF/video) for specific placement of each light component.
2. Carefully disassemble parts of your Lego model as indicated in the instructions to integrate the lights. The cables are designed to fit perfectly between bricks with minimal disassembly.
3. Use the provided tweezers for precise placement of small light components and routing of wires.
4. Connect the light components to the main control board as per the instructions. Ensure all connectors are firmly pressed.
5. Route the wires discreetly to maintain the aesthetic integrity of your model. Avoid pulling wires too hard to prevent damage.
6. Once all lights are installed, reassemble your Lego model.
7. Connect the main control board to the USB power cable or the battery box.

Figure 4.1: The instruction manual provides step-by-step guidance for installation.

5. Operating Instructions

The BrickSoul Light Kit features enhanced touch control for easy operation and multi-level dimming.

5.1 Powering On/Off

• Connect the light kit to a 5V USB power source (e.g., power bank, wall adapter, computer USB port) or ensure batteries are correctly installed in the battery box.
• Press the "Turn On / Off" button on the light control unit to activate or deactivate the lights.

5.2 Adjusting Brightness

• With the lights on, press and hold the "Adjust Brightness" button.
• The brightness will cycle through various levels (e.g., 0%, 50%, 100%). Release the button when the desired brightness is achieved.
• The integrated high-quality lights emit a soft, non-glaring light.

Figure 5.1: Illustration of brightness adjustment using the control button. The image shows the Lego Ford Model T with lights off, at 50% brightness, and at 100% brightness, along with buttons for "Turn On / Off" and "Adjust Brightness".

Figure 5.2: The Lego Ford Model T 11376 model illuminated by the BrickSoul Light Kit, demonstrating the visual enhancement. A hand is shown holding the light control remote.

Figure 5.3: Detailed views of the illuminated Lego Ford Model T, highlighting the red taillights, interior cabin lighting, and bright front headlights, showcasing the precise integration of the light kit.

6. Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the light components and wires. Avoid using liquid cleaners.
• Storage: When not in use for extended periods, disconnect the power source (remove batteries or unplug USB cable). Store the model in a cool, dry place away from direct sunlight.
• Battery Replacement: If using the battery box, replace AAA batteries when lights dim or cease to function. Ensure correct polarity when inserting new batteries.
• Component Care: The light kit components are made from high-quality ABS for durability. Handle wires and connectors carefully to prevent damage.

7. Troubleshooting

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact BrickSoul customer support.

8. Specifications

9. Warranty & Support

9.1 Warranty Information

BrickSoul offers a 1-year free replacement warranty for any non-artificial damage to the light kit components from the date of purchase. This warranty covers manufacturing defects and component failures under normal use.

The warranty does not cover damage caused by misuse, accidental damage, unauthorized modifications, or improper installation.

9.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact BrickSoul customer support. You can reach us through:

• Amazon Messages: Use the messaging system on Amazon.com.mx to contact the seller.
• Email: Refer to the contact information provided in your product packaging or on the BrickSoul official website.

Our support team is dedicated to providing prompt assistance to resolve any issues you may encounter.