Introduction
Thank you for purchasing the FAVSH Dining Table Set. This 3-piece set, including a dining table and two benches, is designed for functional use in various living spaces. This manual provides essential information for safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain for future reference.
Image: The FAVSH 3-piece dining table set, featuring a grey tabletop and black metal frame, suitable for various home decors.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum load capacities: Tabletop 260 lbs (118 kg), Bench 300 lbs (136 kg).
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Avoid standing or climbing on the table or benches.
- Use caution when moving the assembled furniture to prevent damage or injury.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Dining Table
- 2 x Bench
- 1 x Accessory Kit (includes all necessary hardware and tools)
- 1 x Instruction Manual
Image: An illustration detailing the packaging contents and highlighting the estimated assembly time of under 30 minutes for one person.
Setup & Assembly
Assembly is straightforward and typically takes approximately 20 minutes for one person. An electric screwdriver (not included) can expedite the process. Follow the detailed illustrated instructions provided in the accessory kit.
General Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface.
- Identify Parts: Refer to the included instruction manual to identify each component and hardware piece.
- Assemble Table Frame: Attach the table legs to the tabletop using the provided screws and tools. Ensure all connections are firm but do not overtighten initially.
- Assemble Bench Frames: Similarly, attach the bench legs to the bench seats.
- Final Tightening: Once all components are loosely assembled, place the furniture upright and gently rock it to ensure it is level. Then, fully tighten all screws. Avoid overtightening to prevent stripping.
- Attach Adjustable Feet: Screw in the adjustable feet to the bottom of the table and bench legs. Adjust them to ensure stability on uneven surfaces.
Image: A person using a power drill to assemble the dining table, demonstrating the assembly process.
Image: Close-up details of the table's construction, including non-slip foot pads, strong steel tubes, curved table corners, and adjustable feet for stability.
Operating Instructions
The FAVSH Dining Table Set is designed for daily use in dining areas, kitchens, or small spaces. Its functional design allows for efficient space utilization.
Space-Saving Feature:
The benches are designed to tuck completely underneath the dining table when not in use. This feature helps maximize floor space in smaller rooms or when the dining set is not actively being used.
- To store the benches: Simply push each bench inward until it is fully positioned under the table.
- To use the benches: Pull each bench out from under the table to the desired position.
Image: A visual representation of the dining set in both 'in use' and 'stored' configurations, highlighting its space-saving capability.
Image: The dining table with both benches neatly tucked underneath, showcasing the compact storage solution.
Maintenance
Proper care and maintenance will extend the life and appearance of your dining set.
Cleaning:
- Tabletop: The tabletop is waterproof and easy to clean. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild soap solution and dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
- Metal Frame: Wipe the steel frame with a soft, damp cloth. Dry immediately to prevent rust.
General Care:
- Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed.
- Avoid placing hot items directly on the tabletop; use coasters or placemats.
- Protect the furniture from prolonged direct sunlight and extreme temperature changes.
- The anti-slip feet help prevent scratches on your floor. Ensure they are clean and intact.
Image: A detailed view of the tabletop material, emphasizing its waterproof, scratch-resistant, and moisture-proof qualities for easy maintenance.
Troubleshooting
This section addresses common issues you might encounter during assembly or use.
Issue: Screws do not align or are difficult to insert.
- Solution: Ensure you are using the correct screws for each step as indicated in the assembly manual. Do not overtighten screws initially; leave them slightly loose until all parts are aligned, then tighten them gradually. If a screw feels stripped, stop and contact customer support.
Issue: Table or benches wobble after assembly.
- Solution: Check that all screws are securely tightened. Ensure the furniture is on a level surface. Use the adjustable feet on the bottom of the legs to compensate for uneven floors.
Issue: Surface scratches or minor damage.
- Solution: For minor scratches, furniture repair pens or markers matching the grey finish may be used. Always test on an inconspicuous area first.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SQGJ-43 |
| Material | Engineered Wood (MDF) and Steel |
| Table Dimensions (L x W x H) | 43.3 x 23.6 x 29.5 inches (109.2 x 61 x 76.2 cm) |
| Bench Dimensions (L x W x H) | 38.6 x 11.02 x 17.32 inches (98 x 28 x 44 cm) |
| Item Weight | 19.05 kg (42 lbs) |
| Tabletop Load Capacity | 260 lbs (118 kg) |
| Bench Load Capacity | 300 lbs (136 kg) |
| Color | Grey |
| Number of Items | 3 (1 table, 2 benches) |
Image: A detailed diagram illustrating the product dimensions and maximum load capacities for both the dining table and benches.
Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and conditions.
Customer Support
For any questions regarding assembly, missing parts, or product issues, please contact FAVSH customer support. Refer to your purchase receipt or the product packaging for specific contact information.
When contacting support, please have your model number (SQGJ-43) and purchase date available.