VINGLI Folding Picnic Table and Bench Set with Kaqi Umbrella

Introduction

Thank you for choosing the VINGLI Folding Picnic Table and Bench Set. This portable outdoor dining furniture is designed for convenience and durability, perfect for camping, patio gatherings, or backyard use. This manual provides essential information for the safe assembly, operation, and maintenance of your new picnic set.

Image: The VINGLI Folding Picnic Table and Bench Set with a Kaqi umbrella, shown in an outdoor environment next to an RV.

Safety Information

Always use caution when handling and installing the product. It is recommended that two people assemble and move the table to prevent injury or damage. Ensure the table is properly installed and stable before use to prevent tipping or collapse.

• Keep children and pets away from the assembly area.
• Do not overload the table or benches beyond their intended capacity.
• Avoid standing on the table or benches.
• Place the set on a flat, stable surface to prevent wobbling.
• Close the umbrella during strong winds or severe weather conditions.

Package Contents

Please verify that all components are present before beginning assembly:

• Folding Picnic Table Top (1)
• Folding Bench Sections (2)
• Kaqi Umbrella (1)
• Assembly Guide (1)
• Hardware Pack (screws, hex bolts, provided tool)

Setup and Assembly

Assembly is straightforward and can typically be completed within 30 minutes with two people. No complex tools are required beyond what is provided.

Assembly Steps:

1. Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Begin by attaching the legs to the table and bench sections using the provided screws. Ensure all connections are aligned correctly.
3. Tighten all screws firmly using the provided tool. Do not overtighten.
4. Insert the tabletop support brackets into their pre-drilled holes on the underside of the table.
5. Secure the legs to these brackets using the included hex bolts. Ensure these connections are tight for stability.
6. Once all connections are secure, carefully flip the table and benches upright.
7. Insert the Kaqi umbrella into the central umbrella hole on the table. Ensure it is fully seated.

Image: Detailed view of the table's structural design, highlighting triangular bracket reinforcement, a cross-braced underframe system, and non-slip foot pads for enhanced stability.

Operating Instructions

Folding and Unfolding:

The VINGLI picnic set features a convenient foldable design for easy storage and transportation.

• To Fold: Ensure the umbrella is removed. Locate the folding mechanisms on the underside of the table and benches. Release the locks and carefully fold the legs inward until they lie flat against the tabletop/bench surface.
• To Unfold: Reverse the folding process. Extend the legs fully until they lock into place. Ensure all locking mechanisms are engaged before use to guarantee stability.

Umbrella Usage:

The included Kaqi umbrella provides protection from sun and light rain.

• Insert the umbrella pole into the central hole on the table.
• Open the umbrella canopy by pushing up the runner until it locks into place.
• To close, press the release button on the runner and gently pull the canopy down.
• Always remove and store the umbrella during strong winds or when not in use for extended periods to prevent damage.

Image: A close-up view of the central umbrella hole on the table, indicating its 1.65-inch diameter for umbrella insertion.

Maintenance

Proper maintenance will extend the life and appearance of your VINGLI picnic set.

• Cleaning: Wipe the table and benches with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the wood grain plastic top or metal frame.
• Frame Care: The sturdy iron frame has a powder-coated finish for long-term outdoor durability. Inspect regularly for any signs of rust or damage.
• Storage: When not in use for extended periods, especially during harsh weather, fold the set and store it in a dry, protected area to prevent wear and tear.
• Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.

Image: Visual representation of the table's construction, emphasizing the high-density polyethylene waterproof material for easy cleaning and weather resistance, and the sturdy powder-coated iron frame.

Troubleshooting

• Table/Benches Wobble: Ensure all assembly screws and bolts are fully tightened. Verify the set is placed on a flat, even surface.
• Difficulty Folding/Unfolding: Check for any obstructions or debris in the folding mechanisms. Ensure all locking pins are fully disengaged before attempting to fold.
• Umbrella Not Opening/Closing Smoothly: Inspect the umbrella mechanism for any bent parts or obstructions. Ensure the fabric is not caught.

Specifications

Warranty and Support

For any questions, concerns, or support regarding your VINGLI Folding Picnic Table and Bench Set, please contact the seller, VINGLI-Direct, through your purchase platform. They can provide assistance with product issues, missing parts, or warranty claims as per their terms and conditions.

Please retain your proof of purchase for any warranty-related inquiries.