VASAGLE Custos Collection 9-Drawer Dresser Instruction Manual

1. Introduction and Safety Information

Thank you for choosing the VASAGLE Custos Collection 9-Drawer Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Warnings:

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all parts and hardware are present before assembly. Do not proceed if any parts are missing or damaged.
• It is highly recommended that two adults assemble this furniture.
• Anti-Tip Device: For your safety, an anti-tip device is included. It is crucial to install this device correctly to prevent the dresser from tipping over, especially in households with children or pets.
• Do not exceed the maximum weight capacities for the top surface or individual drawers.
• Keep small parts and packaging materials away from children.

2. Package Contents

Before starting assembly, verify that all components listed below are present and undamaged. If any part is missing or defective, please contact customer support.

• 1 x VASAGLE Custos Collection 9-Drawer Dresser
• Assembly Hardware (screws, dowels, etc.)
• Anti-Tip Device Kit
• Instruction Manual (this document)

3. Assembly Instructions

Follow these steps carefully to assemble your dresser. Refer to the detailed PDF manual for diagrams and specific part identification.

Preparation:

• Clear a spacious area for assembly.
• Lay out all parts and hardware, organizing them by their labels.
• Gather necessary tools (e.g., screwdriver, hammer - usually not included).

Assembly Steps (General Overview):

1. Assemble the Main Frame: Connect the side panels, bottom panel, and top panel using the provided hardware. Ensure all connections are secure.
2. Install Drawer Glides: Attach the drawer glides to the inner sides of the dresser frame according to the instructions.
3. Assemble Drawers: Construct each of the nine drawers. Pay attention to the different drawer depths (3 shallow, 6 deep) as indicated in the PDF manual. Install the elegant metal handles on each drawer front.
4. Insert Drawers: Carefully slide the assembled drawers into their respective glides within the dresser frame.
5. Install Anti-Tip Device: This is a critical step. Securely attach the anti-tip device to the back of the dresser and to a wall stud using the provided hardware. This prevents accidental tipping.

4. Operating Instructions

Your VASAGLE Custos Collection dresser is designed for versatile storage and ease of use.

Drawer Usage:

• The dresser features nine drawers of varying depths to accommodate different items. The top three drawers are shallower (approx. 20 cm deep) for smaller items like underwear or socks. The bottom six drawers are deeper (approx. 30 cm deep) for bulkier clothing or light duvets.
• To open a drawer, gently pull the handle. To close, push the drawer firmly until it is fully seated.
• Avoid overloading drawers. Distribute weight evenly to ensure smooth operation and prevent damage.

Anti-Tip Device:

• Always ensure the anti-tip device is securely installed and regularly checked for tightness.
• Do not allow children to climb on the dresser or open multiple drawers simultaneously, as this can increase the risk of tipping.

Versatile Placement:

This dresser can be used in various rooms, including bedrooms, living rooms as a TV stand, or entryways for storage.

5. Maintenance

To ensure the longevity and appearance of your VASAGLE dresser, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood material.
• Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Sunlight and Heat: Avoid placing the dresser in direct sunlight or near heat sources, which can cause fading or warping.

6. Troubleshooting

If you encounter any issues with your dresser, refer to the following common solutions:

• Wobbly Dresser: Ensure all screws are tightened. Check that the dresser is placed on a level surface. Adjust glides if present, or use shims if needed.
• Drawers Not Sliding Smoothly: Check that the drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
• Missing Parts: If you discover missing parts during assembly, do not proceed. Contact customer support immediately for assistance.
• Damage During Shipping: If the product arrived damaged, document the damage with photos and contact customer support before attempting assembly.

7. Specifications

8. Warranty Information

VASAGLE products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact VASAGLE customer service.

9. Support & Contact

For further assistance, detailed assembly diagrams, or to report missing/damaged parts, please use the following resources:

• Official PDF Manual: For comprehensive assembly instructions and diagrams, please download the official PDF manual: Download Instructions d’utilisation (PDF)
• Customer Service: Visit the official VASAGLE website or contact their customer support directly for any inquiries or issues not covered in this manual.