1. Important Safety Information
Read this manual thoroughly before operating your Jasion YC1 ST Electric Bike. Failure to follow instructions and safety warnings can result in serious injury or property damage. Keep this manual for future reference.
1.1 General Riding Safety
- Always wear a helmet that meets safety standards.
- Obey all local traffic laws and regulations.
- Perform a pre-ride inspection before each use, checking brakes, tires, and battery.
- Ride defensively and be aware of your surroundings.
- Avoid riding in adverse weather conditions or on slippery surfaces.
1.2 Battery Safety
- The Jasion YC1 ST battery is UL2849 certified and features a Battery Management System (BMS) for enhanced safety.
- Only use the original charger provided with your bike.
- Do not expose the battery to extreme temperatures or direct sunlight.
- Do not puncture, drop, or disassemble the battery.
- Charge the battery in a well-ventilated area, away from flammable materials.
1.3 Visibility and Braking
- Ensure the bright LED headlights, rear reflectors, and reflective tire strips are clean and functional for optimal visibility, especially at night.
- Familiarize yourself with the dual disc brake system. Test brakes before each ride to ensure proper function.
- Brake smoothly and anticipate stops, especially in wet conditions.
2. Package Contents
Carefully unpack your Jasion YC1 ST Electric Bike and check for all components. If any items are missing or damaged, contact customer support.
- Jasion YC1 ST Electric Bike Frame with Rear Wheel
- Front Wheel
- Handlebar Assembly
- Seat Post with Saddle
- Pedals (Left and Right)
- Kickstand
- Front Fender
- Front Headlight
- Battery Charger
- Tool Kit
- User Manual
Image: Jasion YC1 ST Electric Bike and its main components.
3. Assembly Instructions
The Jasion YC1 ST Electric Bike requires some assembly. Follow these steps carefully. For a visual guide, refer to the assembly video below.
3.1 Assembly Video Guide
Video: Step-by-step assembly guide for the Jasion YC1 ST Electric Bike.
3.2 Step-by-Step Assembly
- Unboxing: Carefully remove all components from the packaging. Keep the packaging for at least 30 days in case of returns or warranty claims.
- Handlebar Installation: Remove the protective cap from the fork stem. Insert the handlebar stem into the fork and tighten the bolts securely using the provided tools. Ensure the handlebar is straight and aligned with the front wheel.
- Kickstand Attachment: Attach the kickstand to the designated mounting points on the bike frame near the rear wheel. Secure it with the bolts and Allen wrench.
- Front Wheel Installation: Remove the protective spacers from the front fork. Insert the quick-release skewer through the front wheel hub. Align the wheel with the fork dropouts and secure it using the quick-release lever. Ensure the disc brake rotor is correctly seated within the caliper.
- Front Fender & Headlight Installation: Attach the front fender to the fork using the provided bolts. Mount the headlight to the front fender bracket and connect its cable.
- Pedal Installation: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Apply a small amount of grease to the threads and tighten them firmly with a wrench.
- Seat Post & Saddle: Insert the seat post with the saddle into the seat tube. Adjust the height to a comfortable riding position and secure it with the quick-release clamp. Ensure the minimum insertion mark is not visible.
- Battery Insertion: Unlock the battery compartment using the key. Slide the battery into the frame until it clicks into place. Lock the battery securely.
- Final Check: Double-check all bolts, connections, and quick releases. Ensure brakes are functional and tires are inflated to the recommended pressure.
4. Component Overview
Familiarize yourself with the key components of your Jasion YC1 ST Electric Bike.
4.1 Internal Removable Battery
Image: The 360WH internal removable battery with UL and BMS certifications.
The 360WH lithium-ion battery is integrated into the frame for a sleek design and can be easily removed for charging or storage. It features a BMS for safety and is UL2849 certified.
4.2 Multi-function LCD Display
Image: The LCD display provides essential riding data at a glance.
The LCD display provides real-time information including current speed, total mileage, battery power level, and Pedal Assist System (PAS) level.
4.3 Lockable Front Suspension
Image: Lockable front suspension for a smoother ride on varied terrain.
The lockable front suspension fork absorbs shocks and bumps, providing a more comfortable ride. It can be locked for efficient pedaling on smooth surfaces.
4.4 Safety Features
Image: Dual disc brakes, wheel reflectors, front headlight, and rear warning light for 360° safety.
The bike is equipped with dual disc brakes for reliable stopping power, a bright LED headlight, a rear warning light, and reflective strips on the tires for enhanced visibility.
4.5 Fenders
Image: Front and rear fenders provide protection from splashes and debris.
Front and rear fenders are installed to protect the rider from splashes and debris, ensuring a cleaner ride.
5. Operating Instructions
5.1 Powering On/Off
- To power on the bike, press and hold the power button on the LCD display until it illuminates.
- To power off, press and hold the power button again until the display turns off.
5.2 Riding Modes
Image: The Jasion YC1 ST offers four distinct riding modes.
Your Jasion YC1 ST Electric Bike features 3 electric riding modes and a traditional pedal-only mode:
- Pedal-Only Mode: Ride the bike like a traditional bicycle without any electric assistance.
- Walk Assist Mode: Provides low-speed assistance for walking the bike, useful when pushing it uphill or through crowded areas.
- Pedal Assist Mode (PAS): The motor provides assistance as you pedal. There are multiple PAS levels (e.g., 1-3) to adjust the amount of assistance. This mode offers a range of up to 50 miles.
- Pure Electric Mode (Throttle): Use the throttle to engage the motor without pedaling. This mode offers a range of up to 25 miles.
Switch between PAS levels using the controls on the handlebar to adjust the motor's assistance.
5.3 Gear Shifting
Image: The 7-speed transmission allows for flexible gear changes.
The bike is equipped with a professional 7-speed transmission. Use the gear shifter on the handlebar to change gears according to terrain and desired effort. Shift smoothly to avoid strain on the drivetrain.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your electric bike.
6.1 Battery Care
- Charging: Fully charge the battery in 5-6 hours using the provided charger. Do not overcharge.
- Storage: If storing the bike for an extended period, charge the battery to 50-70% and store it in a cool, dry place. Recharge every 2-3 months.
- Cleaning: Keep battery contacts clean and dry.
6.2 Tire Pressure
- Check tire pressure before each ride. Refer to the sidewall of the 26" x 2.0" tires for recommended PSI.
- Proper tire pressure improves ride quality, efficiency, and safety.
6.3 Brakes and Gears
- Brakes: Regularly inspect the dual disc brakes for wear on pads and rotors. Ensure brake levers are firm and responsive. Adjust as needed or have a professional service them.
- Gears: Keep the 7-speed chain and derailleur clean and lubricated. Ensure smooth shifting.
6.4 General Cleaning
- Clean the bike regularly with a damp cloth and mild soap. Avoid high-pressure washing directly on electrical components.
- The bike has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction.
7. Troubleshooting
Here are some common issues and their potential solutions:
- Bike not powering on: Check if the battery is fully charged and properly seated. Ensure the battery is locked in place and the key is turned to the 'on' position.
- Motor not assisting: Verify that the PAS level is not set to 0. Check if the brake levers are fully released, as some systems cut motor power when brakes are applied.
- Brakes squealing or ineffective: Inspect brake pads for wear. Clean rotors and pads. If the issue persists, professional adjustment may be required.
- Gears not shifting smoothly: Check for debris in the derailleur or chain. Lubricate the chain. If shifting is still problematic, the derailleur may need adjustment.
For persistent issues, contact Jasion customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | YC1 ST |
| Bike Type | City Bike, Commuting Bike |
| Wheel Size | 26 Inches |
| Motor | 1200W Peak Brushless Motor |
| Max Speed | 28 Mph |
| Battery | 360 Watt Hours (UL2849 Certified, BMS) |
| Charging Time | 5-6 Hours |
| Max Range (PAS Mode) | Up to 50 Miles |
| Riding Modes | Pure Electric, Pedal Assist, Walk Assist, Pedal-Only |
| Gears | 7-Speed Transmission (Electronic Shifter) |
| Brakes | Dual Disc Brakes |
| Suspension | Lockable Front Suspension |
| Tires | 26" x 2.0" Rubber |
| Waterproof Rating | IPX4 |
| Ebike Weight | 58 lbs |
| Load Capacity | 330 lbs |
| Recommended Height | 5'1" - 6'6" |
9. Warranty and Support
Jasion is committed to providing quality products and support.
- Product Care: Includes an extra 1-year product care.
- Technical Guidance: Lifetime technical guidance is available.
- Customer Support: A professional customer support team is available to assist with any inquiries or issues.
For detailed warranty information or to contact support, please visit the official Jasion website or refer to the warranty card included with your purchase.
