1. Product Overview
The MXV 80" Fireplace TV Stand is a modern entertainment center designed to accommodate TVs up to 90 inches. It features a 36-inch electric fireplace with adjustable flame and backlight colors, along with ample storage and integrated cable management. This manual provides essential information for safe assembly, operation, and maintenance of your TV stand.
Image 1.1: The MXV 80" Fireplace TV Stand with the electric fireplace active, showcasing its modern design and integrated lighting.
2. Important Safety Information
Please read all safety instructions carefully before assembly and operation. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Ensure the product is assembled on a flat, stable surface.
- Do not overload the TV stand. The tabletop supports up to 331 lbs, and each glass shelf supports up to 33 lbs.
- The electric fireplace is equipped with overheat protection and an automatic shut-off function. Do not block the air vents.
- Keep flammable materials at least 3 feet (0.9 meters) away from the front of the fireplace.
- Only use the fireplace with a properly grounded 120V AC outlet.
- Do not operate the fireplace with a damaged cord or plug.
- This product is for indoor use only.
- The electric fireplace is CSA and ETL certified, ensuring compliance with safety standards.
3. Package Contents
Your MXV Fireplace TV Stand is delivered in two separate boxes. Please ensure you have received both boxes and all components before beginning assembly.
Image 3.1: The TV stand and fireplace insert are shipped in two separate packages (Box A for fireplace, Box B for stand components).
Each package contains:
- Clearly numbered parts for easy identification.
- All necessary hardware (screws, dowels, connectors, etc.).
- An illustrated assembly manual.
- The 36-inch electric fireplace insert (in Box A).
- TV stand panels and shelves (in Box B).
If any parts are missing or damaged, please contact customer support immediately.
4. Setup and Assembly
Assembly of the MXV Fireplace TV Stand requires two people and approximately 1-2 hours. Follow the step-by-step instructions provided in the included illustrated manual. Ensure you have a Phillips head screwdriver and a hammer (for dowels) readily available.
4.1 Pre-Assembly Checklist
- Unpack all components and verify against the parts list in the manual.
- Identify all hardware and separate them for easy access.
- Choose a spacious, clean, and soft area (e.g., carpet) for assembly to prevent scratches.
4.2 Assembly Steps (General Outline)
- Assemble the main frame of the TV stand using the numbered panels and connectors.
- Attach the base and top panels.
- Install the interior shelves and cabinet doors.
- Carefully insert the 36-inch electric fireplace into its designated opening.
- Connect the LED light strips according to the manual's diagrams.
- Ensure all connections are secure and the stand is stable before placing a TV or other items on it.
Refer to the detailed diagrams and instructions in your physical manual for precise assembly steps.
5. Operating Instructions
5.1 Electric Fireplace Operation
The 36-inch electric fireplace can be operated via the control panel on the unit or the included remote control.
- Power On/Off: Press the power button to turn the fireplace on or off.
- Flame Colors: Cycle through 12 different flame colors to match your mood or decor.
- Flame Brightness: Adjust the flame intensity with 5 brightness levels (L1-L5).
- Heat Settings: Select between 750W (low heat) and 1500W (high heat) for warmth.
- Temperature Control: Set the desired room temperature between 62°F and 82°F. The fireplace will automatically adjust to maintain this temperature.
- Timer Function: Utilize the 0-8 hour timer for automatic shut-off.
Image 5.1: The electric fireplace offers 12 flame colors and 5 brightness levels for customizable ambiance.
Image 5.2: The fireplace provides a heating function with low noise and a timer for comfortable use.
5.2 LED Light Strip Operation
The integrated LED light strips offer additional ambient lighting.
- Color Selection: Cycle through 12 different LED backlight colors.
- Brightness Adjustment: Adjust the brightness of the LED lights.
Image 5.3: The TV stand features a 12-color LED light strip to enhance visual appeal.
5.3 Official Product Video
Video 5.4: An official video demonstrating the MXV Fireplace TV Stand's features, including its 12 LED and flame color options.
6. Maintenance
Regular maintenance will help prolong the life and appearance of your TV stand.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood-grain finish or high-gloss surfaces.
- Dusting: Regularly dust the unit to prevent buildup, especially around the fireplace vents.
- Fireplace Care: Ensure the fireplace vents are clear of obstructions. Do not attempt to service the internal components of the fireplace yourself. Refer to qualified service personnel if issues arise.
- Cable Management: Periodically check cable routing to ensure they are not pinched or damaged.
- Structural Integrity: Occasionally check all screws and fasteners to ensure they remain tight.
Image 6.1: The TV stand features a high gloss surface that should be cleaned with a soft cloth.
7. Troubleshooting
If you encounter issues with your MXV Fireplace TV Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power, power cord loose, overheat protection activated. | Check power outlet and cord connection. Allow fireplace to cool if it was recently in use. Reset circuit breaker if tripped. |
| No heat output from fireplace. | Heat function not activated, temperature setting too low, vents blocked. | Ensure heat function is selected. Increase temperature setting. Clear any obstructions from the air vents. |
| LED lights not working or partially working. | Loose connection, faulty LED strip. | Check all LED strip connections. If issues persist, contact customer support for a replacement LED strip. |
| Remote control not working. | Dead batteries, obstruction, remote out of range. | Replace batteries. Ensure no obstructions between remote and unit. Operate within recommended range. |
| Stand feels unstable after assembly. | Loose fasteners, incorrect assembly. | Re-check all screw and cam lock connections. Refer to the assembly manual to ensure all steps were followed correctly. |
For issues not listed here or if solutions do not resolve the problem, please contact MXV customer support.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | MXV |
| Model Number | ON-TS08 |
| Overall Dimensions (Approx.) | 80.00" W x 13.70" D x 22.99" H |
| Fireplace Insert Dimensions (Approx.) | 36.10" W x 13.82" H |
| Material | Engineered Wood |
| Finish Type | Wood Grain, High Gloss |
| Color | White & Black |
| Maximum Compatible TV Size | Up to 90 inches |
| Tabletop Weight Capacity | 331 lbs |
| Shelf Weight Capacity | 33 lbs (each glass shelf) |
| Fireplace Heat Output | 750W / 1500W |
| Fireplace Temperature Range | 62°F to 82°F |
| Fireplace Timer | 0-8 hours |
| Fireplace Certifications | CSA, ETL |
| Special Features | Adjustable Flame (12 colors), Adjustable LED (12 colors), Overheat Protection, Automatic Shut-off, Cable Management |
| Item Weight | 85 pounds |
9. Warranty and Support
9.1 Warranty Information
MXV products are manufactured to high-quality standards. Specific warranty details, including coverage period and terms, are typically provided with your product packaging or can be found on the official MXV website. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
If you have any questions regarding assembly, operation, missing parts, or require technical assistance, please contact MXV customer support. Have your model number (ON-TS08) and purchase information ready when contacting support.
For the most up-to-date contact information, please visit the official MXV website or refer to the contact details provided in your product packaging.