Nextech Mag-Safe Magnetic Wireless Power Bank 10000mAh Instruction Manual

1. Introduction

Thank you for choosing the Nextech Mag-Safe Magnetic Wireless Power Bank 10000mAh. This device is designed to provide convenient and efficient charging for your mobile devices, featuring both wired (22.5W PD Type-C) and wireless (15W Mag-Safe compatible) charging capabilities. Please read this manual carefully before use to ensure optimal performance and safety.

1.1. Package Contents

• Nextech Mag-Safe Magnetic Wireless Power Bank (1 unit)
• User Manual (this document)

Image 1.1: Overview of the Nextech Mag-Safe Magnetic Wireless Power Bank, highlighting its 10000mAh capacity and key features.

2. Setup

2.1. Initial Charging of the Power Bank

Before first use, fully charge the power bank. Connect the power bank to a compatible USB-C power adapter (not included) using a USB-C to USB-C cable (not included). The LED indicators will illuminate to show the charging progress.

• A full charge typically takes approximately 90 minutes with a suitable fast charger.
• The LED indicators will show solid lights when fully charged.

Image 2.1: The power bank being charged via its USB-C port, indicated by the illuminated LED lights.

3. Operating Instructions

3.1. Wired Fast Charging (22.5W PD Type-C)

To charge your device using a cable:

1. Connect one end of a USB-C to USB-C cable (or USB-C to Lightning cable for compatible iPhones) to the power bank's Type-C port.
2. Connect the other end of the cable to your smartphone or other compatible device.
3. The power bank will automatically begin charging your device. The LED indicators will show the remaining battery level of the power bank.

This port supports 22.5W Power Delivery (PD) for fast charging compatible devices.

Image 3.1: A smartphone receiving 22.5W wired fast charging from the power bank via a Type-C connection.

3.2. 15W Mag-Safe Wireless Charging

To charge your device wirelessly:

1. Ensure your device is compatible with Mag-Safe or Qi wireless charging.
2. Align your Mag-Safe compatible iPhone (iPhone 12 and above) with the magnetic charging surface of the power bank. The magnets will snap into place, securing the connection.
3. For other Qi-compatible devices, place the device centrally on the wireless charging surface.
4. The power bank will automatically begin 15W wireless charging.

Image 3.2: An iPhone wirelessly charging via the Mag-Safe magnetic connection on the power bank.

3.3. LED Indicator

The power bank features LED indicators to display its battery status:

• Solid LEDs: Indicate remaining battery capacity.
• Flashing LEDs: Indicate the power bank is currently charging.

3.4. Pass-Through Charging

The power bank supports pass-through charging, allowing it to charge itself and a connected device simultaneously. When the power bank is connected to a power source, and a device is connected to the power bank (either wired or wirelessly), both will receive power.

Image 3.3: The power bank performing pass-through charging, powering a device while being recharged itself.

4. Maintenance

• Keep the power bank dry. Do not expose it to moisture or liquids.
• Clean the power bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid dropping or subjecting the power bank to strong impacts.
• For optimal battery life, fully charge the power bank at least once every three months if not in regular use.

5. Troubleshooting

5.1. Power Bank Not Charging

• Ensure the charging cable is securely connected to both the power bank and the power adapter.
• Verify that the power adapter is functioning correctly and connected to a live power outlet.
• Try using a different USB-C cable and power adapter.

5.2. Device Not Charging from Power Bank (Wired)

• Check if the power bank has sufficient charge (refer to LED indicators).
• Ensure the cable connecting the power bank and your device is securely plugged in at both ends.
• Try using a different charging cable.
• Confirm your device is compatible with the power bank's output.

5.3. Device Not Charging from Power Bank (Wireless)

• Ensure the power bank has sufficient charge.
• Verify your device supports Qi wireless charging or Mag-Safe.
• Remove any thick phone cases or metallic objects that may interfere with wireless charging.
• Ensure your device is correctly aligned on the wireless charging surface.

5.4. Slow Charging

• Ensure both the power bank and your device support fast charging protocols (PD, QC).
• Use a high-quality, fast-charging compatible cable.
• Environmental factors (e.g., high temperature) can affect charging speed.

6. Specifications

7. Safety Information

The Nextech Mag-Safe Magnetic Wireless Power Bank is built with advanced safety protection features to ensure secure operation:

• Overheating Protection: Prevents the device from reaching unsafe temperatures.
• Overcharging Protection: Protects the battery from being overcharged, extending its lifespan.
• Short Circuit Protection: Safeguards against electrical shorts.
• Over-Discharge Protection: Prevents the battery from being fully depleted, which can damage it.
• Over-Voltage Protection: Protects against excessive voltage input.
• Over-Current Protection: Guards against excessive current flow.

General Safety Precautions:

• Do not disassemble, modify, or repair the device yourself.
• Do not expose the power bank to fire, water, or extreme temperatures.
• Keep out of reach of children.
• Avoid using the power bank in environments with high humidity or dust.

8. Warranty and Support

8.1. Warranty Information

This power bank comes with a 12-month warranty covering manufacturing defects only. This warranty ensures dependable performance. Please retain your proof of purchase for warranty claims.

8.2. Customer Support

For any questions, technical support, or warranty claims, please contact Nextech customer service:

• Manufacturer: Amson Interconnect Pvt Ltd.
• Phone: +91-9953694939
• Email: social@amson.in