roborock F25 Steam Cordless Wet Dry Vacuum Cleaner

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your roborock F25 Steam Cordless Wet Dry Vacuum Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

Image: The roborock F25 Steam Cordless Wet Dry Vacuum Cleaner.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This appliance is for household use only.

• Do not use the appliance outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Package Contents

Verify that all items are present and in good condition upon unpacking.

• Wet Dry Vacuum Cleaner
• Charging Dock
• Power Cable
• Washable Filter
• Maintenance Brush
• Floor Cleaning Solution
• Roller Brush

Image: All components included in the roborock F25 Steam package: the vacuum cleaner, charging dock, power cable, washable filter, maintenance brush, floor cleaning solution, and roller brush.

Setup

1. Assembly

1. Insert the handle into the main body of the vacuum cleaner until it clicks into place.
2. Ensure the clean water tank and dirty water tank are correctly installed.

2. Charging

Place the vacuum cleaner on the charging dock. Connect the power cable to the charging dock and plug it into a power outlet. The indicator lights will show the charging status. A full charge takes approximately 3.5 hours.

3. Filling the Clean Water Tank

Open the clean water tank cap. Fill the tank with clean water. For enhanced cleaning, add the recommended amount of roborock floor cleaning solution. Close the cap securely.

Operating Instructions

1. Power On/Off

Press the power button to turn the vacuum cleaner on or off.

2. Cleaning Modes

The roborock F25 Steam offers four cleaning modes:

• Steam Mode: Activates 180°C high-temperature steam for deep cleaning and dissolving stubborn stains. Steam activates in approximately 60 seconds.
• ECO Mode: Energy-efficient mode for light cleaning with extended battery life (up to 80 minutes).
• Auto Mode: Automatically adjusts suction power and water flow based on detected dirt levels.
• Sponge Mode: For specific cleaning tasks requiring more water or solution.

Image: Visual representation of the four cleaning modes: Steam, ECO, Auto, and Sponge, with examples of their use.

3. High-Temperature Steam Cleaning

Utilize the VaporFlow technology to deliver 180°C steam, effectively dissolving dried-on stains, grease, and sticky residues. This mode is suitable for various hard floor types including parquet, tiles, laminate, and marble, reducing the need for harsh chemicals.

Image: The roborock F25 Steam performing continuous 180°C steam cleaning, highlighting its ability to loosen stubborn dirt. Features include 60-second rapid steam activation, gentle cleaning for pets and children, and zero damage certification for wood floors. For more details on certification, visit SGS Certification.

4. Powerful Suction and Wet Mopping

The device combines 25,000 Pa suction power with a unique anti-tangle JawScrapers design to effectively pick up pet hair, crumbs, dust, and liquids in a single pass. The roller rotates at 450 rpm with 33N downward pressure for thorough cleaning.

Image: The roborock F25 Steam cleaning various types of wet and dry dirt, including chocolate, milk, ketchup, pet food, butter, and paw prints, demonstrating its 25,000 Pa suction and 450 rpm rotation with 33N pressure.

5. Edge Cleaning and FlatReach Design

The FlatReach 2.0 design allows the vacuum to lay completely flat, reaching under beds, sofas, and low furniture with a height of only 12.5 cm. It also provides full edge coverage, minimizing missed spots along walls and in corners.

Image: The roborock F25 Steam demonstrating its 180° FlatReach 2.0 design for cleaning under low furniture (12.5 cm clearance) and its integrated blue light for revealing hidden dust and debris.

Image: The roborock F25 Steam performing edge-to-edge cleaning, showing its ability to clean right up to walls and into corners, leaving no gaps.

6. Intelligent Dirt Detection

The integrated sensor detects the level of dirt and automatically adjusts cleaning power for a deeper clean where needed, and a quicker clean where it's not, saving time and reducing repeated passes.

Image: A graphic illustrating the intelligent dirt detection system, showing how the device identifies areas with less, zero, or more residue and adjusts cleaning intensity accordingly, with real-time display on the screen.

7. Voice Alerts

Timely voice alerts provide information on the cleaning status, allowing you to stay focused on daily activities.

Maintenance

1. Automatic Self-Cleaning and Drying

The all-in-one thermal self-cleaning system refreshes the roller brush with a 180°C steam wash and a 95°C high-temperature wash to dissolve stubborn dirt. After cleaning, 95°C hot air drying keeps the roller fresh, dry, and ready for the next use.

Image: Two panels illustrating the automatic self-cleaning system: one showing 180°C high-temperature steam cleaning and 95°C hot water washing, and the other showing rapid automatic hot air drying at 95°C.

Image: A detailed diagram of the all-in-one thermal self-cleaning system, outlining steps such as automatic tube cleaning, intelligent roller dirt control, double high-temperature soaking, 360° bidirectional roller scrubbing, high-speed centrifugation, 180°C steam cleaning, and 95°C hot air drying for 5 or 30 minutes.

2. Emptying the Dirty Water Tank

After each use, remove the dirty water tank and dispose of the contents. Rinse the tank thoroughly with clean water. The removable wet and dry separation system keeps solid and liquid materials separate for cleaner disposal.

3. Cleaning the Roller Brush

The anti-tangle JawScrapers technology minimizes hair accumulation on the roller. For manual cleaning, remove the roller brush and use the provided maintenance brush to remove any remaining debris. Ensure the roller is completely dry before reinstallation.

Image: Two panels illustrating the anti-tangle features and water control. One shows the JawScrapers anti-tangle structure achieving 0% entanglement rate. The other highlights the 32 water outlets for precise water control.

4. Cleaning the Filter

The washable filter should be cleaned regularly to maintain optimal suction performance. Remove the filter, rinse it under running water, and allow it to air dry completely before placing it back into the vacuum cleaner.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official roborock website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.