1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DEPGI Cooling Fan for Xbox Series S. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
The DEPGI Cooling Fan is designed to enhance the cooling performance of your Xbox Series S console, featuring automatic fan speed adjustment based on temperature, an LED display screen, and customizable RGB lighting.
2. Safety Information
- Ensure the fan is properly seated on the console to prevent instability.
- Do not block the fan's air vents during operation.
- Keep the device away from water or excessive moisture.
- Do not attempt to disassemble or repair the unit yourself. Contact support if issues arise.
- Use only with compatible Xbox Series S consoles.
3. Package Contents
- DEPGI Cooling Fan for Xbox Series S
- Integrated USB Power Cable
- Instruction Manual (this document)
4. Setup and Installation
Follow these steps to install the cooling fan on your Xbox Series S console.
4.1 Positioning the Fan
Place the cooling fan directly on top of your Xbox Series S console. Ensure the fan's vents align with the console's top exhaust area.
Image: The DEPGI Cooling Fan positioned on an Xbox Series S console, illustrating its compact design and integrated LED display.
4.2 Connecting Power
Connect the fan's integrated USB cable to an available USB port on your Xbox Series S console. The fan will power on automatically.
Image: Connecting the USB power cable from the cooling fan to the Xbox Series S console.
4.3 Orientation Options
The cooling fan can be used with the Xbox Series S in both vertical and horizontal orientations.
Image: Illustration of the cooling fan's compatibility with both vertical and horizontal console setups.
4.4 Installation Video
Video: Official DEPGI Tech video demonstrating the installation process of the cooling fan for Xbox Series S.
5. Operating Instructions
The DEPGI Cooling Fan offers both automatic and manual control modes for optimal cooling.
5.1 LED Temperature Display
The integrated LED screen displays the current temperature of your Xbox Series S console. This helps monitor the console's thermal performance.
Image: The LED display showing the console's temperature.
5.2 Switching Temperature Units (°F/°C)
To switch between Fahrenheit (°F) and Celsius (°C) temperature display, locate the small button next to the LED screen and press it briefly.
Image: The LED display showing the option to switch between Fahrenheit and Celsius.
5.3 Automatic Mode
In Automatic Mode, the fan adjusts its speed based on the console's temperature. The fan will stop operating if the temperature drops below 35°C (95°F).
5.4 Manual Mode and Fan Speeds
To switch to Manual Mode, press and hold the control button for 3 seconds. In Manual Mode, you can cycle through three fan speeds by pressing the button briefly:
- Low Speed (Green LED): 1500 RPM, for temperatures between 35-43°C (95-109°F).
- Medium Speed (Blue LED): 1750 RPM, for temperatures between 44-48°C (110-118°F).
- High Speed (Red LED): 2000 RPM, for temperatures above 48°C (119°F).
Image: Visual representation of fan speed levels and corresponding LED colors based on temperature.
6. Maintenance
6.1 Cleaning
To maintain optimal performance, periodically clean the fan and its vents. Use a soft, dry cloth to wipe away dust. For stubborn dust, a can of compressed air can be used to clear the vents.
Ensure the fan is disconnected from the console before cleaning.
6.2 Storage
When not in use for extended periods, store the cooling fan in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan not turning on. | Not properly connected to USB port; console not powered on; fan in auto mode and temperature is low. | Ensure USB cable is securely connected. Verify console is powered on. If in auto mode, the fan will only activate above 35°C (95°F). Try manual mode. |
| Fan is noisy. | Dust accumulation; fan operating at high speed. | Clean the fan and vents. In manual mode, select a lower fan speed if cooling requirements allow. |
| Temperature display is inaccurate. | Sensor obstruction; environmental factors. | Ensure no objects are blocking the fan's sensor area. Ensure proper ventilation around the console. |
| LED lights not changing color. | Fan not in manual mode; temperature not reaching thresholds. | Switch to manual mode. The LED colors correspond to temperature ranges in auto mode and selected speed in manual mode. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6.54"L x 6.61"W x 2.01"H |
| Brand | DEPGI |
| Power Connector Type | 3-Pin (USB) |
| Voltage | 5 volts |
| Wattage | 5 watts |
| Cooling Method | Air |
| Compatible Devices | Xbox Series S Gaming Console |
| Noise Level | 25 dB |
| Material | Plastic |
| Maximum Rotational Speed | 2000 RPM |
| Item Weight | 12.32 ounces |
9. Warranty Information
DEPGI products are covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the product packaging or contact DEPGI customer support.
10. Customer Support
If you encounter any issues or have questions regarding your DEPGI Cooling Fan for Xbox Series S, please contact our customer support team:
- Email: Refer to DEPGI's official website or product packaging for contact details.
- Website: Visit the DEPGI Store on Amazon