1. Introduction
Thank you for choosing the IPOOLGO Extra Large Inflatable Pool. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your inflatable pool. Please read all instructions carefully before use and retain this manual for future reference.
Image: The IPOOLGO Extra Large Inflatable Pool, 12.2ft x 48in, shown in a backyard setting with multiple individuals enjoying the water. This image illustrates the pool's large capacity and suitability for family use.
2. Safety Information
WARNING: Failure to follow these instructions can result in serious injury or death.
- Adult supervision is required at all times when children are in or near the pool.
- Do not dive or jump into the pool. The water depth is not sufficient for diving.
- Ensure the pool is set up on a level, stable surface, free from sharp objects.
- Keep children away from the pool when it is not in use.
- Do not allow rough play in or around the pool.
- Empty the pool completely after each use or secure it to prevent unsupervised access.
- Do not use electrical appliances near the pool.
- Regularly check the pool for signs of wear, damage, or leaks. Repair immediately if found.
- This pool is designed for outdoor use only.
Image: A brown bear standing in an inflatable pool, splashing water. This image highlights the pool's robust construction and durability, emphasizing its "Engineered for Strength" design.
3. Package Contents
Verify that all components listed below are included in your package:
- IPOOLGO Extra Large Inflatable Pool
- Inflator wrench
- 1.25-inch sand filter hose adapter
- 1.5-inch sand filter hose adapter
- Repair patch
- Instruction Manual (this document)
Note: An inflator pump and sand filter are not included with this product. A SUP Air Pump for inflatable paddleboards is recommended for inflation.
Image: A detailed view of the pool's inflation and drainage ports, along with the included accessories: an inflator wrench, 1.25-inch and 1.5-inch sand filter hose adapters, a repair patch, and the instruction manual.
4. Setup Instructions
-
Choose a Location: Select a flat, level terrain for the pool, away from sharp objects, trees, or structures that could cause damage. Ensure adequate drainage is available.
Image: A composite image illustrating the three main steps for setting up the pool: 1) Laying the pool flat, 2) Inflating the pool using an air pump, and 3) Filling the pool with water.
- Lay Out the Pool: Unfold the inflatable pool on the chosen site. It is recommended that more than two people work together to position the pool correctly.
-
Inflate the Pool: Insert an air pump (not included) into the inflation port. Inflate the pool until the pool walls are fully firm and hard, with no creases. Using two pumps simultaneously can inflate the pool in approximately 10 minutes. The pool walls are designed to reach a thickness of 6 inches (15 cm) when inflated to 10 PSI. During the pressure-building stage, the pump may produce louder noise; this is normal.
Image: A diagram illustrating the dual-stage inflation process, highlighting how an automatic dual-stage pump can achieve 2X faster inflation. It shows the first stage at 350L/min and the second stage at 100L/min for 0-12 PSI.
Video: This tutorial demonstrates the process of installing the IPOOLGO inflatable pool, including site preparation and inflation steps. (Duration: 2:40)
- Fill with Water: Use a water hose to fill the pool until it reaches the recommended water level, typically just below the top inflation ring. The pool can hold approximately 2,880 gallons of water.
-
Optional Sand Filter Installation: If you are using an external sand filter (not included), connect it to the designated sand filter ports using the provided 1.25-inch or 1.5-inch sand filter hose adapters.
Video: This guide provides instructions for installing an optional sand filter system to the pool. (Duration: 0:27)
5. Operating Instructions
5.1. Using the Pool
- Ensure the pool is fully inflated and filled to the appropriate level before use.
- Always supervise children in and around the pool.
- Do not allow pets into the pool, as their claws can puncture the material.
5.2. Draining the Pool
The pool features dual drain valves for quick draining:
- Locate the drain valves at the bottom of the pool.
- Open the drain valves to allow water to flow out. Direct the water to a suitable drainage area.
- Once empty, ensure the pool is completely dry before deflating and storing.
6. Maintenance
6.1. Cleaning
- Regularly remove debris from the pool water.
- Clean the pool walls and floor with a soft brush and mild soap solution. Rinse thoroughly.
- For optimal water quality, consider using a pool cover when not in use and an optional sand filter system.
6.2. Storage
- Ensure the pool is completely dry before deflating to prevent mold and mildew.
- Deflate the pool by pushing the inflation port to release air.
- Fold the pool neatly and store it in a cool, dry place, away from direct sunlight and sharp objects.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool loses air quickly. | Loose air valve or puncture. |
1. Ensure the air valve is securely tightened. Use the included inflator wrench to tighten clockwise if loose. 2. Locate any punctures. Use the included repair patch and adhesive (not included) to seal the hole. Refer to the "Swimming Pool Repair Tutorial" video for guidance. Video: This tutorial demonstrates how to repair minor leaks or punctures in the inflatable pool using the provided repair patch. (Duration: 0:34) |
| Pool walls are not firm. | Insufficient inflation. | Inflate the pool further until the walls are firm to the touch (up to 10 PSI). Ensure the pump is operating correctly. |
| Water drains slowly. | Drain valves are partially obstructed or not fully open. | Ensure both drain valves are fully open and clear of any debris. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | IPOOLGO |
| Model Number | OG-3.7 |
| Product Dimensions (L x W x H) | 145.6" x 145.6" x 47" (12.2ft x 12.2ft x 48in) |
| Shape | Round |
| Capacity | Approximately 2,880 gallons |
| Material Type | PVC + ADB Composite Material (Drip Glue Process) |
| Wall Thickness (Inflated) | 6 inches (15 cm) |
| Indoor/Outdoor Usage | Outdoor |
Image: A visual representation of the pool's dimensions, indicating a 12.2ft diameter and 48in height, along with its water capacity of 2880 gallons.
9. Warranty and Support
IPOOLGO offers a "Hassle-Free Guarantee" for this product. If you encounter a manufacturing defect within 12 months of purchase, you are eligible for a free replacement or a hassle-free return. To claim, please send a photo or video of the defect via Amazon messaging.
For complete after-sales service, professional customer support, and quick responses, please contact IPOOLGO customer service through the Amazon platform or visit the official IPOOLGO store.
Contact Information:
- Amazon Messaging: Refer to your order details for direct contact.
- IPOOLGO Store: Visit the IPOOLGO Store on Amazon
Image: A family enjoying the IPOOLGO inflatable pool in a sunny backyard, illustrating the product's intended use for family recreation.