Fjords Jewel Swing Relaxer Recliner Chair User Manual

1. Introduction

Thank you for choosing the Fjords Jewel Swing Relaxer Recliner Chair. This manual provides essential information for the safe and efficient use of your new recliner. Please read it thoroughly before assembly and operation, and retain it for future reference.

The Fjords Jewel Swing Relaxer is designed for ultimate comfort and ergonomic support, featuring an advanced 3-motor system for independent control of reclining, lumbar support, and headrest adjustment. It includes convenient charging ports and is crafted with premium Soft Line leather and elegant oak wood accents.

Image 1: The Fjords Jewel Swing Relaxer Recliner Chair in a modern setting, showcasing its elegant design and comfortable appearance.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight recommendation of 300 pounds (136 kg).
• Electrical Safety: Ensure the power cord is not pinched or damaged. Use only the provided power adapter. Keep liquids away from electrical components.
• Children and Pets: Keep children and pets away from moving parts during operation to prevent injury.
• Clearance: Ensure adequate space around the chair, especially when reclining. A minimum of 14 inches of wall clearance is required for full recline.
• Stable Surface: Place the chair on a flat, level floor surface suitable for swivel base operation.
• Cleaning: Disconnect power before cleaning. Refer to the maintenance section for proper cleaning instructions.

3. Package Contents

Upon unpacking, please verify that all components are present and undamaged:

• Fjords Jewel Swing Relaxer Recliner Chair (partially assembled)
• Power Cord / Adapter
• User Manual (this document)

If any parts are missing or damaged, please contact your retailer or Fjords customer support immediately.

4. Setup

The Fjords Jewel Swing Relaxer arrives partially assembled. Follow these steps to complete the setup:

1. Unpack the Chair: Carefully remove all packaging materials. Ensure the chair is placed on a protective surface to avoid scratching your floor.
2. Position the Chair: Place the chair in your desired location, ensuring sufficient clearance for reclining and swivel functions. Remember, only 14 inches of wall clearance is needed for full recline.
3. Connect Power: Locate the power input port on the chair. Connect the provided power cord to the chair and then plug it into a standard electrical outlet.
4. Verify Functionality: Once powered, test the motorized functions using the control panel.

The swivel base is pre-installed, and the oak wood panel accents are pre-attached. No complex assembly is required beyond connecting the power.

5. Operating Instructions

The Fjords Jewel Swing Relaxer features an intuitive control panel for its advanced 3-motor system.

5.1 Control Panel Functions

The integrated control panel, located on the side panel of the chair, allows for independent adjustment of the following:

• Motorized Reclining and Footrest: Use the dedicated buttons to smoothly recline the backrest and extend the footrest to your desired position.
• Motorized Lumbar Support: Adjust the lumbar support to provide optimal comfort for your lower back.
• Adjustable Headrest Angle: Control the angle of the headrest for personalized neck and head support.

5.2 Charging Ports

The control panel also includes convenient charging options:

• USB-C Port: For charging compatible electronic devices.
• Magnetic Charging Port: For specific compatible accessories or devices.

5.3 Swivel and Rocking Motion

The chair is mounted on a swivel base, allowing for a 270-degree rotation. It also offers a gentle rocking motion for added relaxation.

Image 2: Detailed diagram illustrating the motorized headrest, power lumbar support, control panel with USB-C port, motorized recline and footrest, rocking motion, magnetic charging port, and 270-degree swivel base.

6. Maintenance

Proper care will ensure the longevity and appearance of your Fjords Jewel Swing Relaxer.

• Cleaning: The Soft Line Leather upholstery should be wiped clean with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the leather finish. For specific leather care products, consult a leather care specialist.
• Wood Accents: Wipe the oak wood panels with a dry or slightly damp cloth. Avoid excessive moisture.
• Moving Parts: Periodically check all moving parts and connections for tightness. Do not lubricate motorized components unless specifically instructed by Fjords customer support.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub.

7. Troubleshooting

If you encounter any issues with your Fjords Jewel Swing Relaxer, please refer to the following common solutions:

• Chair Not Responding:
  • Ensure the power cord is securely plugged into both the chair and the wall outlet.
  • Check if the wall outlet is functional by plugging in another device.
  • Verify that no wires are pinched or damaged under the chair.
• Unusual Noises:
  • Minor operational sounds are normal. If you hear loud grinding or unusual noises, discontinue use and contact customer support.
• Charging Ports Not Working:
  • Ensure the chair is powered on.
  • Test with a different device or charging cable to rule out device issues.

For persistent issues or concerns not addressed here, please contact Fjords customer support.

8. Specifications

Detailed specifications for the Fjords Jewel Swing Relaxer Recliner Chair:

8.1 Available Color and Size Options

The Fjords Jewel Swing Relaxer is available in various Soft Line Leather color combinations and two sizes:

• Leather Colors: Shadow Grey with Oak Mocca, Stout with Oak Mocca, Cigar with Oak Natural
• Sizes: Small, Large

Image 3: The Fjords Jewel Recliner shown in Shadow Grey with Oak Mocca, Stout with Oak Mocca, and Cigar with Oak Natural leather options.

9. Warranty and Support

Fjords stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Fjords website. Warranty terms typically cover manufacturing defects under normal use.

For technical assistance, parts replacement, or any other inquiries, please contact your authorized Fjords retailer or visit the Fjords customer support portal online. When contacting support, please have your model name (Jewel) and purchase information readily available.

Thank you for choosing Fjords.