YESHOMY 71.5" Tall Bookshelf and Bookcase Instruction Manual

Introduction

Thank you for purchasing the YESHOMY 71.5" Tall Bookshelf and Bookcase. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

Important Safety Warnings:

• Always assemble the product according to the provided instructions.
• Do not overload the shelves, as this may cause the unit to tip over.
• Ensure the unit is stable and properly secured to the wall using the anti-tipping device before use.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use on a level surface to prevent instability.

Figure 1: Anti-tipping device for enhanced stability. Always secure the unit to a wall.

Package Contents

Before assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Side Panels (2)
• Top Panel (1)
• Bottom Panel (1)
• Fixed Shelves (2)
• Adjustable Shelves (2)
• Back Panels (multiple sections)
• Cabinet Doors (2)
• Door Hinges (4)
• Door Handles (2)
• Anti-tipping Kit (1)
• Hardware Pack (screws, dowels, cam locks, shelf pins, anti-friction feet)
• Assembly Instructions Manual (1)

Setup and Assembly

Assembly typically requires two individuals. Please follow the step-by-step instructions provided in the included assembly guide. Ensure you have a clear, spacious area for assembly.

1. Prepare the Area: Lay out all components on a soft, clean surface to prevent scratches.
2. Assemble the Frame: Connect the side panels to the top and bottom panels using the provided hardware (e.g., cam locks and dowels).
3. Install Shelves: Insert fixed shelves into designated slots. For adjustable shelves, use the shelf pins to set them at your desired height.
4. Attach Back Panels: Secure the back panels to the frame using small nails or screws.
5. Install Doors: Attach hinges to the cabinet doors and then to the main frame. Adjust hinges as needed for proper door alignment. Install door handles.
6. Attach Anti-Tipping Device: Secure the anti-tipping bracket to the top rear of the bookshelf and then to a wall stud using appropriate wall anchors and screws. This step is crucial for safety.
7. Install Anti-Friction Feet: Attach the anti-friction feet to the bottom of the unit to protect your floor and provide minor leveling.

Figure 2: Detail of adjustable shelf and anti-friction feet for floor protection.

Operating Instructions

Your YESHOMY bookshelf is designed for versatile storage. Here’s how to best utilize its features:

• Adjustable Shelves: The upper shelves are adjustable. To change shelf height, remove items, lift the shelf, remove the metal pins, reposition them to desired holes, and then place the shelf back on the pins. Ensure pins are fully inserted and the shelf is level before placing items.
• Cabinet Doors: The lower section features two doors for concealed storage. Open and close doors gently using the handles. Avoid forcing them to prevent damage to hinges.
• Weight Distribution: Distribute weight evenly across shelves. Place heavier items on lower shelves or closer to the sides for maximum stability. Do not exceed the recommended weight capacity per shelf (approx. 20 lbs).

Maintenance

Proper care will extend the life and appearance of your bookshelf.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish. Dry immediately with a clean cloth.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
• Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the wood material.

Troubleshooting

Specifications

Figure 3: Product Dimensions Overview.

• Model: YH-BC24-0478-4NEW-1PCS
• Material: Engineered Wood (P2 grade MDF board)
• Overall Dimensions (D x W x H): 11.8" x 22.4" x 71.5"
• Open Shelf Dimensions (H x D): 10.8" x 11.8"
• Concealed Shelf Dimensions (H x D): 14" x 11.8"
• Number of Shelves: 4 (2 fixed, 2 adjustable)
• Mounting Type: Floor Mount
• Special Feature: Adjustable Shelves, Anti-tipping Device
• Item Weight: 64.61 Pounds
• Color: Grey
• Assembly Required: Yes

Warranty and Support

YESHOMY stands behind the quality of its products. For any questions regarding assembly, missing parts, or product defects, please contact our customer support team. Please have your purchase information and model number ready when contacting support.

Customer Support: Refer to your purchase documentation or the YESHOMY official website for contact details.