Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your IRONCK 59-inch TV Stand. This entertainment center is designed to accommodate TVs up to 65 inches and features integrated LED lighting and a built-in power outlet for convenience. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and safe operation.
Safety Information
- Exercise caution around sharp edges during assembly to prevent injury.
- Ensure all connections are secure and stable after assembly.
- Do not exceed the recommended weight capacity for the TV stand.
- Keep small parts away from children during assembly.
Setup and Assembly
Your IRONCK TV stand comes with all necessary hardware and numbered parts for a straightforward assembly process. Please follow the included clear instructions step-by-step.
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list provided in your separate assembly guide.
- Prepare Workspace: Assemble the unit on a clean, soft surface to prevent scratches.
- Follow Numbered Steps: Refer to the detailed assembly instructions for specific steps on attaching panels, shelves, and hardware.
- Install Hinges and Handles: Attach the soft-close hinges to the cabinet doors and secure the metallic finish handles.
- Integrate Power Outlet: Install the UL-certified three-prong power outlet into its designated slot.
- Position Adjustable Shelves: Place the adjustable glass shelves at your desired height within the open compartments.
- Route Cables: Utilize the integrated cable management holes to organize and conceal wires from your electronic devices.
Operating Instructions
LED Lighting System
The TV stand features a smart motion-sensor LED light strip to enhance your viewing experience.
- Motion Sensor: The LED lights automatically illuminate when motion is detected within approximately 20 inches.
- Control Buttons: Use the touch buttons to cycle through 3 color levels, adjust brightness, and modify speed settings.
- Smart Body Sensor Mode: This mode optimizes light activation based on presence.
Built-in Power Outlet
The integrated power outlet provides convenient access to power for your devices.
- Specifications: The UL-certified power strip includes three 125V/12A AC outlets, one 5V/2A USB port, and one 5V/2A Type-C port.
- Power Cord: Features a 4.9 ft power cord for flexible placement.
- Usage: Connect your TV, gaming console, chargers, and other electronic devices directly to the stand for a neat and efficient setup.
Product Overview Video
Watch this video for a visual overview of the IRONCK TV Stand's features and design.
Care and Maintenance
- Cleaning: Wipe the surfaces of the TV stand with a dry cloth to remove dust and debris. For spills, use a damp cloth and dry immediately.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions, as these may damage the finish.
- Water Resistance: The carbon fiber MDF material offers water resistance, but prolonged exposure to moisture should be avoided.
Troubleshooting
LED Lights Not Functioning
- Check Power Connection: Ensure the LED light strip is securely plugged into a working power source.
- Verify Sensor: Confirm that the motion sensor is not obstructed and is clean. Test the sensor by moving within its 20-inch range.
- Inspect Connections: Check all wiring connections to the LED strip and controller for looseness.
- Contact Support: If the issue persists, the LED sensor or strip may be faulty. Contact IRONCK customer support for assistance.
Power Outlet Not Working
- Check Main Power: Ensure the TV stand's main power cord is securely plugged into a functional wall outlet.
- Test Devices: Try plugging a different device into the power outlet to confirm if the issue is with the outlet or your device.
- Overload: Avoid overloading the power strip. Ensure the total wattage of connected devices does not exceed the strip's capacity (125V/12A).
Stand Instability
- Verify Assembly: Double-check all screws and fasteners to ensure they are tightened correctly according to the assembly instructions.
- Level Surface: Ensure the TV stand is placed on a flat, level surface.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | HK-TS-B26H1 |
| Brand | IRONCK |
| Color | Black |
| Material | Engineered Wood (Carbon Fiber MDF) |
| Overall Dimensions (L x W x H) | 59 x 15.3 x 25.5 inches |
| Item Weight | 69.4 pounds |
| TV Size Compatibility | Up to 65 inches |
| LED Lights | Motion-sensor, 3 color levels, adjustable brightness/speed |
| Power Outlet | 3 AC outlets (125V/12A), 1 USB port (5V/2A), 1 Type-C port (5V/2A) |
| Power Cord Length | 4.9 ft |
| Additional Features | Adjustable Glass Shelves, Soft-Close Hinges, Cable Management Holes, Metallic Finish Handles |
| Waterproof | Yes |
| UPC | 722385214000 |
Warranty Information
For specific warranty details regarding your IRONCK TV Stand, please refer to the warranty card included with your product or visit the official IRONCK website. Typically, manufacturer warranties cover defects in materials and workmanship under normal use. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact IRONCK customer support. You can usually find contact information on the IRONCK website or through the retailer where you purchased the product.
Online Resources: For additional support and product information, visit the IRONCK Store on Amazon.
