MOVHEIYL Replacement Remote Control

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

MOVHEIYL Replacement Remote Control Instruction Manual

For UREVO Spacewalk E1 URTM030 URTM025/URTM026 SYWP002, Upreign N3805, TOPUTURE TP4 Walking Pad Treadmill

Introduction

This manual provides instructions for the MOVHEIYL Replacement Remote Control. Please read this manual carefully before use to ensure proper operation and longevity of your remote control.

Compatibility

Compatible Treadmill Models

This replacement remote control is compatible with the following walking pad treadmill models:

  • UREVO Spacewalk E1 URTM030
  • UREVO Spacewalk E1 URTM025/URTM026 SYWP002
  • Upreign N3805
  • TOPUTURE TP4 Walking Pad Treadmill

Setup

Battery Installation

The remote control requires button batteries (not included) for operation.

Image showing the back of the remote control with a battery compartment and a 3V lithium button battery.

Locate the battery compartment on the back of the remote control. Insert a 3V lithium button battery (e.g., CR2032), ensuring correct polarity. Close the battery compartment securely.

Remote Pairing

Follow these steps to pair the remote control with your treadmill:

  1. Insert the battery into the remote control.
  2. Press and hold the power button or the '+' sign on the remote. (Note: The specific button may vary depending on your treadmill model; try each one individually if unsure.)
  3. Turn on the treadmill's power switch.
  4. A long beep sound from the treadmill indicates a successful connection.

Important: Pairing and unpairing operations must be performed within 10 seconds of the treadmill being powered on.

Image showing the MOVHEIYL replacement remote control next to a walking pad treadmill, with a wireless signal icon indicating connection. Text on image says 'OPERATIONAL DISTANCE: 8 meters long distance remote control'.

The remote control connects wirelessly to the treadmill. Ensure the remote is within operational distance, typically up to 8 meters, for effective pairing and control.

A hand holding the MOVHEIYL replacement remote control near a walking pad treadmill, demonstrating its use.

Hold the remote control firmly during the pairing process and operation.

Main product image showing the MOVHEIYL replacement remote control and a walking pad treadmill.

This image illustrates the remote control in proximity to a compatible treadmill, ready for use after successful pairing.

Operating Instructions

Button Functions

The remote control features several buttons for operating your treadmill:

Close-up image of the MOVHEIYL remote control highlighting the 'MODE' button and indicating 'ABS Environmental protection material Soft silicon button'.

The remote is constructed from high-quality ABS material with soft silicone buttons for comfortable and durable use. The 'MODE' button allows switching between different treadmill modes.

Diagram illustrating the functions of the MOVHEIYL remote control buttons, showing play/pause, speed adjustment (+/-), and mode selection.
  • Central Button (Play/Pause): Initiates or pauses treadmill operation.
  • '+' Button: Increases treadmill speed.
  • '-' Button: Decreases treadmill speed.
  • MODE Button: Cycles through different treadmill modes or programs.
  • Bell/Mute Button: May control sound or notification features on the treadmill.

This diagram details the primary functions of each button. The exact functionality of the 'MODE' and bell icon buttons may vary slightly depending on your specific treadmill model.

Troubleshooting

Pairing Issues

If the remote control fails to pair with your treadmill using the standard method, try the following alternative pairing procedures:

Diagram illustrating various pairing methods for the remote control, showing different button press combinations (long press, simultaneous press) and their corresponding 'Method' numbers.

This diagram provides eleven different methods for pairing the remote control. The general procedure involves:

  1. First, turn off the treadmill's power supply.
  2. Next, press and hold any button on the remote control while simultaneously turning the treadmill's power back on.
  3. Once you hear a 'beep' sound, release the remote control button.

Note: Since button configurations vary across different treadmill models, please try each button individually until successful. If pairing fails, try a different combination of key presses as shown in the diagram.

Maintenance

Care and Cleaning

The remote control is made of high-quality ABS material, designed to be resistant to falling and free from peculiar odors. To maintain its condition, wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the surface or internal components.

Specifications

Product Specifications

  • Brand: MOVHEIYL
  • Connectivity Technology: Infrared
  • Controller Type: Button Control
  • Maximum Range: 10 Meters
  • Material: High Quality ABS
  • Special Features: Ergonomic design, Soft silicon buttons
  • Power Source: 3V Lithium Button Battery (e.g., CR2032, not included)
  • Color: Black

Warranty and Support

Warranty Information

This product comes with a 1-year warranty return service from the date of purchase.

Customer Support

For any questions regarding your order, product functionality, or troubleshooting, please feel free to contact customer support directly. We aim to respond to inquiries within 12 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.