1. Introduction
Thank you for purchasing the GAOMON G-D9E36F 39.4" Lift Top Coffee Table. This versatile piece of furniture is designed to enhance your living space with its dual lift-top design, ample storage, and convertible functionality. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your coffee table.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Ensure all connections are secure before using the table. Periodically check and tighten fasteners.
- Do not exceed the weight capacities specified for each section of the table. Overloading can cause damage or injury.
- When lifting or lowering the table sections, ensure hands and fingers are clear of pinch points.
- Always lower the smaller, lower table section first to avoid damage when collapsing the table.
- Use the table on a flat, stable surface to prevent tipping.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact GAOMON customer support.
- Coffee Table Components (wood panels, frame parts)
- Hardware Pack (screws, bolts, connectors)
- Installation Tool (Allen wrench, screwdriver)
- Instruction Manual
4. Setup and Assembly
Assembly typically requires a screwdriver and a wrench (included). Follow the step-by-step instructions provided in the separate assembly guide included with your product. Ensure all parts are correctly oriented and securely fastened.
Key Assembly Tips:
- Lay out all parts on a clean, soft surface to prevent scratches.
- Do not overtighten screws during initial assembly; tighten fully once the entire section is assembled.
- Ensure the gas lift mechanisms are installed correctly for smooth operation.

5. Operating Instructions
The GAOMON G-D9E36F coffee table offers multiple configurations for various uses.
5.1 Dual Split Lift-Top Design
The table features two independently lifting tabletops. To lift a section, gently pull it upwards. The gas lift mechanism will assist in raising it smoothly. To lower, gently push the top down until it locks into place. Ensure hands are clear of the mechanism.
5.2 Multi-Functional Convertible Table
The larger surface of the table can rotate 180° and lift to a dining height, transforming the coffee table into a dining table, home office desk, or gaming area. To rotate, lift the larger top slightly, rotate it to the desired position, and then lower it. To achieve dining height, lift the larger top fully. Always ensure the table is stable in its desired configuration before applying weight.


5.3 Generous Storage Space
The table includes two sliding drawers and three hidden compartments located under the lift-tops. To access the hidden compartments, lift the corresponding tabletop. The drawers slide open smoothly for easy access to stored items.

5.4 Gas Lift Mechanism
The table utilizes a silent metal gas lift mechanism for effortless and stable operation of the lift-tops. This mechanism ensures smooth raising and lowering.

6. Maintenance
- Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Spills: Clean spills immediately to prevent staining, especially on wooden surfaces.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.
- Lift Mechanism: The gas lift mechanism is designed for durability. Avoid applying excessive force when lifting or lowering. Do not attempt to lubricate the gas strut unless specifically instructed by the manufacturer.
- Environmental Conditions: Avoid placing the table in direct sunlight or near heat sources, as this can cause wood to warp or fade. Maintain a stable room temperature and humidity.
7. Troubleshooting
- Tabletop is difficult to lift or lower: Ensure no objects are obstructing the mechanism. Check if the gas lift mechanism was installed correctly during assembly. If the issue persists, contact customer support.
- Drawers are sticking: Check for any obstructions in the drawer slides. Ensure the table is on a level surface.
- Table feels wobbly: Verify that all assembly screws and bolts are securely tightened. Ensure the table is placed on a flat, even floor.
- Scratches or minor damage: For minor scratches, wood repair kits or markers can be used. For significant damage, contact customer support for advice.
8. Specifications
| Brand | GAOMON |
| Model Number | G-D9E36F |
| Product Dimensions (L x W x H) | 39.37" x 19.69" x 18.5" (closed) |
| Extended Height | 26.8" (approximate, with lift top raised) |
| Item Weight | 92.6 pounds |
| Frame Material | Acacia Wood |
| Top Material | Acacia Wood |
| Color | Black |
| Number of Drawers | 2 |
| Storage Compartments | 3 hidden, 1 open shelf |
| Tools Recommended for Assembly | Screwdriver, Wrench (included) |
9. Warranty and Support
For warranty information, replacement parts, or technical assistance, please contact GAOMON customer support through the retailer where the product was purchased or visit the official GAOMON website. Please have your model number (G-D9E36F) and purchase details ready when contacting support.