Aiwa AW-TR102 Bluetooth Trolley Party Speaker User Manual

Introduction

Thank you for choosing the Aiwa AW-TR102 Bluetooth Trolley Party Speaker. This manual provides essential information for the safe and efficient operation of your speaker. Please read it thoroughly before use and retain it for future reference.

Image: Aiwa AW-TR102 Bluetooth Trolley Party Speaker, showcasing its portable design with an extended handle and wheels.

The Aiwa AW-TR102 is a powerful 150W speaker featuring a 12-inch subwoofer, dual wireless microphones, RGB LED lights, and multiple connectivity options including Bluetooth, USB, AUX, and FM radio. Its trolley design ensures easy portability for various events.

Package Contents

• Aiwa AW-TR102 Trolley Party Speaker
• 2 Wireless Microphones
• Remote Control
• Power Adapter
• User Manual (this document)

Setup

1. Charging the Speaker

1. Connect the provided power adapter to the speaker's charging port.
2. Plug the adapter into a 220V AC power outlet.
3. The charging indicator light will illuminate. Allow approximately 4-6 hours for a full charge.
4. A fully charged battery provides up to 6 hours of playback time, depending on usage volume and LED light activity.

2. Initial Power On

• Locate the Power button on the control panel.
• Press and hold the Power button for a few seconds until the speaker powers on.

3. Microphone Setup

• Insert two AA batteries (not included) into each wireless microphone, observing polarity.
• Turn on the microphones using their respective power switches.
• The microphones will automatically pair with the speaker.

Image: Top control panel of the Aiwa AW-TR102 speaker, showing various input ports and control knobs for volume, echo, and mode selection.

Operating Instructions

1. Mode Selection

Press the Mode button on the control panel or remote control to switch between Bluetooth, USB, AUX, and FM radio modes.

2. Bluetooth Connectivity

1. Power on the speaker and select Bluetooth mode. The speaker will indicate it is ready for pairing.
2. Enable Bluetooth on your mobile device or computer.
3. Search for "AW-TR102" in the list of available devices and select it to pair.
4. Once paired, the speaker will confirm the connection, and you can begin playing audio from your device.
5. The Bluetooth range is approximately 10 meters.

3. USB Playback

• Insert a USB flash drive containing MP3 audio files into the USB port.
• The speaker will automatically switch to USB mode and begin playback.
• Use the Play/Pause, Next, and Previous buttons to control playback.

4. AUX Input

• Connect an external audio device (e.g., smartphone, MP3 player) to the AUX input port using a 3.5mm audio cable (not included).
• Select AUX mode on the speaker.
• Audio will play from the connected device. Control playback from the external device.

5. FM Radio

• Select FM mode.
• Press the Play/Pause button to initiate an automatic scan for available FM stations.
• Use the Next and Previous buttons to navigate between saved stations.

6. Karaoke Function and Recording

• Ensure wireless microphones are connected and powered on.
• Adjust microphone volume and echo levels using the dedicated knobs on the control panel.
• To record, insert a USB drive. Press the Record button (if available on the control panel or remote) to start recording. Press again to stop.

7. RGB LED Lights

• The speaker features dynamic RGB LED lights that sync with the music.
• Use the Light Mode button (if available) on the control panel or remote to cycle through different light patterns or turn them off.

8. Dynamic Bass Boost (DBB)

• The Dynamic Bass Boost feature enhances low-frequency audio.
• Activate or deactivate DBB using the dedicated button on the control panel or remote control for a deeper bass experience.

9. True Wireless Stereo (TWS) Function

The TWS function allows you to pair two AW-TR102 speakers for a stereo sound experience.

1. Ensure both speakers are powered on and in Bluetooth mode, without being connected to any device.
2. On one speaker (this will be the primary speaker), press and hold the TWS button for a few seconds.
3. The speakers will attempt to pair with each other. Once successfully paired, you will hear an audible confirmation.
4. Connect your mobile device to the primary speaker via Bluetooth. Audio will now play in stereo through both speakers.

Image: Feature overview of the Aiwa AW-TR102, illustrating key components and capabilities such as the 12" woofer, 7200mAh battery, wireless microphone, RGB front panel, and multi-connectivity options.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners, waxes, or solvents.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
• Water Resistance: This speaker is not water resistant. Avoid exposure to water or high humidity.

Troubleshooting

Specifications

Warranty Information

The Aiwa AW-TR102 speaker comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Support

For technical assistance, warranty claims, or product inquiries, please contact Aiwa customer support:

• Phone: 1800-120-5619
• Email: getintouch@aiwaindia.com
• Manufacturer: AIWA INDIA SALES & SERVICES PRIVATE LIMITED