1. Introduction
Thank you for choosing the sweeek Lunea Extendable Aluminum Garden Table and Amara Chairs set. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.

Figure 1: The sweeek Lunea Extendable Aluminum Garden Table with Amara Chairs.
2. Setup and Assembly
Careful assembly is crucial for the stability and longevity of your garden furniture. Ensure all components are present and undamaged before beginning assembly.
2.1 Unpacking
- Carefully remove all components from the packaging.
- Place all parts on a soft, clean surface to prevent scratches.
- Verify that all parts listed in the hardware and parts list (not provided in this document, refer to product packaging) are present.
- Keep packaging materials away from children.
2.2 Table Assembly (Lunea)
The Lunea table features an aluminum structure designed for robustness and lightness. Assembly typically involves attaching the legs to the tabletop frame and securing the extension mechanism.
- Attach each leg to the designated corner brackets on the underside of the table frame using the provided bolts and washers. Do not fully tighten bolts yet.
- Ensure the extension mechanism slides freely. If it is pre-assembled, check for smooth operation.
- Once all legs are loosely attached, place the table upright on a level surface.
- Evenly tighten all bolts. Avoid over-tightening to prevent damage to the aluminum frame.

Figure 2: View of the table's extension mechanism, illustrating the sliding components for expanding the tabletop.
2.3 Chair Assembly (Amara)
The Amara chairs are constructed with an aluminum frame and Textilene seating for comfort and durability. Assembly is generally straightforward.
- Attach the backrest to the seat frame using the provided hardware.
- Secure the legs to the seat frame. Ensure all connections are firm.
- Repeat for all 10 chairs.
- Check that all chairs are stable and do not wobble. Adjust connections if necessary.

Figure 3: A single Amara chair, highlighting the aluminum frame and Textilene fabric.
3. Operation
The Lunea table is designed for flexible seating arrangements, accommodating 8 to 10 people through its extendable tabletop.
3.1 Extending the Tabletop
- Unlock: Locate any locking mechanisms under the table that secure the two main tabletop sections. Release these locks.
- Separate: Gently pull the two main tabletop sections apart. The extension leaves are typically stored within the table frame.
- Insert Extension: Retrieve the extension leaf(s) from its storage compartment. Carefully place the leaf(s) into the gap created between the two main tabletop sections.
- Close: Push the two main tabletop sections back together until they meet the extension leaf(s) and form a continuous surface.
- Lock: Re-engage any locking mechanisms under the table to secure the extended tabletop in place.
3.2 Retracting the Tabletop
- Unlock: Release any locking mechanisms under the table.
- Separate: Gently pull the two main tabletop sections apart to create a gap.
- Remove Extension: Carefully lift and remove the extension leaf(s). Store the leaf(s) in its designated compartment within the table frame.
- Close: Push the two main tabletop sections back together until they meet.
- Lock: Re-engage any locking mechanisms to secure the table in its compact position.
4. Care and Maintenance
The sweeek Lunea table and Amara chairs are designed for easy maintenance, thanks to their aluminum and Textilene construction. Proper care will help preserve their appearance and extend their lifespan.
4.1 General Cleaning
- Aluminum Frames: Clean aluminum frames with a soft cloth, mild soap, and lukewarm water. Rinse thoroughly with clean water and dry immediately to prevent water spots. Avoid abrasive cleaners, harsh chemicals, or wire brushes, as these can damage the finish.
- Textilene Seats: The Textilene fabric is resistant to weather and easy to clean. Use a soft brush or sponge with mild soap and water to remove dirt. Rinse well and allow to air dry. Do not use bleach or strong detergents.
- Tabletop: For the aluminum tabletop, follow the same cleaning instructions as for the aluminum frames.
4.2 Seasonal Care and Storage
- During periods of non-use or harsh weather conditions (e.g., heavy rain, snow, strong winds), it is recommended to cover the furniture with a protective cover or store it indoors.
- Ensure the furniture is clean and dry before covering or storing to prevent mold or mildew growth.
- Regularly check all bolts and connections and tighten them if necessary to maintain stability.

Figure 4: Detail of the chair's aluminum frame, illustrating the robust construction.
5. Troubleshooting
This section addresses common issues you might encounter with your sweeek Lunea table and Amara chairs.
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chair wobbles | Uneven assembly; loose bolts; uneven ground. | Ensure all bolts are tightened evenly. Place on a level surface. If persistent, check for bent components. |
| Table extension mechanism is stiff | Dirt or debris in the tracks; lack of lubrication; misaligned parts. | Clean tracks thoroughly. Apply a silicone-based lubricant to the sliding mechanism. Check for proper alignment during assembly. |
| Scratches on aluminum frame | Impact with sharp objects; abrasive cleaning. | Minor scratches can sometimes be buffed out with fine-grit sandpaper (use caution and test on an inconspicuous area). For deeper scratches, touch-up paint matching the anthracite grey may be used. Prevent future scratches by using soft cleaning materials. |
| Textilene fabric appears stained or discolored | Accumulated dirt; prolonged exposure to harsh elements. | Clean with mild soap and water using a soft brush. For stubborn stains, a specialized outdoor fabric cleaner may be used, following product instructions. Ensure regular cleaning to prevent buildup. |
6. Specifications
Detailed specifications for the sweeek Lunea Extendable Aluminum Garden Table and Amara Chairs.
| Feature | Description |
|---|---|
| Product Name | Lunea Extendable Garden Table + Amara Chairs (Set of 10) |
| Model Number | A2XT300X10AT |
| Color | Anthracite Grey |
| Table Material | Aluminum |
| Chair Frame Material | Aluminum |
| Chair Seat Material | Textilene |
| Table Dimensions (L x W x H) | 180/240/300 x 100 x 75 cm (70.9/94.5/118.1 x 39.4 x 29.5 inches) |
| Table Weight | 37.5 kg (82.7 lbs) |
| Chair Dimensions (L x W x H) | 62 x 55 x 84 cm (24.4 x 21.7 x 33.1 inches) |
| Chair Seat Height | 44 cm (17.3 inches) |
| Chair Weight (each) | 2.1 kg (4.6 lbs) |
| Maximum Chair Load Capacity | 120 kg (264.5 lbs) |
| Armrest Width | 3.6 cm (1.4 inches) |
| Armrest Height | 63 cm (24.8 inches) |
| Power Source | Manual (No external power required) |
| Spare Parts Availability | Information unavailable |

Figure 5: Dimensional diagram for the Lunea table and Amara chair, including length, width, and height measurements.
7. Warranty Information
Specific warranty details for the sweeek Lunea Extendable Aluminum Garden Table and Amara Chairs are not provided in this document. Please refer to your purchase documentation, retailer's website, or contact sweeek customer service for comprehensive warranty information.
8. Customer Support
Should you require assistance with assembly, parts, or have any questions regarding your sweeek Lunea Extendable Aluminum Garden Table and Amara Chairs, please contact the retailer or sweeek customer support directly. Have your model number (A2XT300X10AT) and purchase details ready when contacting support.





