Ausic P85

Ausic P85 Portable Misting System Instruction Manual

Model: P85

1. Introduction

The Ausic P85 Portable Misting System is designed to provide effective outdoor cooling, hydration for plants, and dust reduction. This system features a 10000mAh water pump, a 9L water bucket, and a 26-foot (8-meter) hose, making it suitable for various outdoor environments such as patios, gardens, and sports areas.

The system operates by releasing a fine water mist that absorbs ambient heat, capable of lowering temperatures by 3-10°C (5-14°F) and maintaining a comfortable 25°C (77°F).

Ausic P85 Misting System in use on a patio

Image 1.1: The Ausic P85 Portable Misting System providing cooling for an outdoor patio area. The system includes a control panel for mist settings and a water bucket.

2. Package Contents

Verify that all components are present in the package:

  • 1 x Ausic P85 Portable Misting Unit (with integrated 10000mAh water pump)
  • 1 x 9L (2.38 gallons) Foldable Water Bucket
  • 1 x 26FT (8M) Misting Hose
  • Misting Nozzles (pre-installed or separate, refer to packaging)
  • 2 x Sponge Filters
  • 2 x Replacement Nozzles
  • Power Adapter/Charging Cable
Ausic P85 Misting System components including hose, sponge filters, and replacement nozzles

Image 2.1: Key components of the Ausic P85 system, including the main unit, hose, sponge filters, and replacement nozzles, highlighting its portability.

3. Setup Instructions

Follow these steps to set up your Ausic P85 Portable Misting System:

  1. Prepare the Water Bucket: Unfold the 9L water bucket. Ensure it is clean before filling. The bucket serves as both a water reservoir and a storage/carrying case.
  2. Fill the Bucket: Fill the bucket with clean water. For enhanced cooling, ice water can be used.
  3. Connect the Pump: Place the main misting unit with the integrated pump into the water bucket. Ensure the pump's intake is submerged in the water.
  4. Install the Sponge Filter: Attach a sponge filter to the pump's water intake to prevent debris from entering the system.
  5. Connect the Misting Hose: Connect the 26FT (8M) misting hose to the outlet port on the main unit. The hose features a push-to-connect mechanism. Ensure a secure connection to prevent leaks.
  6. Position the Misting Nozzles: Strategically place the misting nozzles in the desired cooling area. The hose can be cut to customize the length of mister branches. Press to disconnect hose sections for adjustment. The spray direction of individual nozzles can be adjusted.
Diagram showing steps for connecting hoses and customizing mister branch length

Image 3.1: Visual guide for connecting hose sections, adjusting nozzles, and customizing the length of mister branches by cutting the hose.

4. Operating Instructions

The Ausic P85 features a 10000mAh built-in battery, providing approximately 8+1 hours of working time. The durable PCS pump operates smoothly with minimal vibration.

4.1 Powering On/Off

  • To power on the unit, press and hold the power button located on the control panel.
  • To power off, press and hold the power button again.

4.2 Selecting Mist Modes

The system offers optional mist modes, including a DIY Mist Mode, allowing customization of misting intervals and duration:

  • Mist Time: Use the controls on the panel to set how long the misting occurs during each cycle.
  • Mist Interval: Use the controls to set how often the misting cycles activate.
Control panel for setting mist time and interval

Image 4.1: The control panel displaying options to set mist duration and interval for customized cooling.

4.3 Charging the Battery

Connect the provided power adapter to the charging port on the main unit and plug it into a suitable power outlet. The charging indicator light will show the charging status.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your misting system.

5.1 Cleaning the Sponge Filter

The system includes two sponge filters to prevent clogging. Regularly inspect and clean the sponge filter attached to the pump's intake. If the filter is heavily soiled or damaged, replace it with one of the provided spares.

5.2 Nozzle Maintenance

If misting performance decreases or nozzles appear clogged, clean them. If cleaning does not resolve the issue, replace the affected nozzles with the provided replacement nozzles.

5.3 System Storage

When not in use, especially during colder months, drain all water from the system. Clean the bucket and hoses. The foldable bucket can be used to store the entire system compactly.

6. Troubleshooting

If you encounter issues with your Ausic P85 system, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Water drips from nozzles instead of mistingClogged nozzles; Insufficient water pressure; Loose connections.Clean or replace nozzles. Ensure pump is fully submerged and filter is clean. Check all hose connections for tightness.
System leaks at fittingsHose not fully inserted; Damaged O-ring or connection point.Ensure all hose connections are fully pushed in and secure. Inspect O-rings for damage and replace if necessary.
Water flow is uneven or weakClogged filter; Low water level; Kinked hose.Clean or replace the sponge filter. Refill the water bucket. Check the hose for any kinks or obstructions.
Unit does not power onBattery is depleted; Power button not pressed correctly.Charge the battery using the provided adapter. Ensure the power button is pressed and held for a few seconds.

7. Specifications

FeatureDetail
Model NumberP85
BrandAusic
Product Dimensions30.48 x 17.78 x 33.02 cm
Item Weight454 g
ColourBlack
Water Bucket Capacity9L (2.38 gallons)
Hose Length26 FT (8 M)
Battery Capacity10000mAh
ManufacturerFengchuangda
UPC784154475586, 763344550685

8. Warranty and Support

Warranty information for the Ausic P85 Portable Misting System is not provided within this manual. Please refer to the product packaging, the manufacturer's official website, or your point of purchase for details regarding warranty coverage and customer support.

9. Applications

The Ausic P85 Portable Misting System is versatile and can be used in various settings for cooling and hydration:

  • Patios and Outdoor Dining Areas: Provides a comfortable cooling mist for relaxation and entertainment.
  • Gardens and Greenhouses: Helps hydrate plants and maintain optimal humidity levels.
  • Sports and Recreation: Offers quick cooldown for athletes and spectators in outdoor sports environments.
  • Pet Areas: Keeps pets cool during hot weather.
  • Camping: Enhances comfort in outdoor camping setups.
  • Agricultural Settings: Can be used for cooling livestock areas like chicken coops.
Various applications of the Ausic P85 Misting System including chicken coops, patios, pets, camping, and greenhouses

Image 9.1: Examples of diverse applications for the Ausic P85 Misting System, demonstrating its utility in various outdoor and agricultural environments.

© 2026 Ausic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.