VICLLAX Swivel Outdoor Chairs Instruction Manual

1. Introduction

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your VICLLAX Swivel Outdoor Chairs. Please read these instructions carefully before assembly and retain for future reference.

Image 1.1: VICLLAX Swivel Outdoor Chairs Set of 2 in a patio setting. The image shows a round table with six chairs, two of which are swivel chairs, on a wooden deck next to a pool.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight capacity of 250 lbs per chair.
• Stable Surface: Always place the chairs on a flat, stable, and level surface to prevent tipping.
• Children: Keep children away from the assembly area. Ensure all parts are securely fastened before allowing children to use the chairs.
• Moving Parts: Be aware of moving parts during assembly and operation, especially the swivel mechanism, to avoid pinching.
• Weather Conditions: While designed for all-weather use, extreme weather conditions (e.g., strong winds) may require securing or storing the chairs to prevent damage or injury.
• Inspection: Periodically inspect all bolts and connections to ensure they remain tight. Retighten as necessary.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Chair Backrests
• Chair Seats with Padded Textilene Fabric
• Armrests (Straight Arms)
• Swivel Bases
• Hardware Pack (bolts, washers, nuts, Allen wrench)

4. Assembly Instructions (Setup)

Assembly typically requires two people. Do not fully tighten bolts until all components are aligned and loosely assembled.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Attach Armrests to Seat: Align the armrests with the pre-drilled holes on the sides of the chair seat. Insert bolts and hand-tighten.
3. Attach Backrest: Connect the backrest to the seat and armrests, aligning all holes. Insert remaining bolts and hand-tighten.
4. Attach Swivel Base: Secure the assembled chair top to the swivel base. Ensure the swivel mechanism is correctly oriented. Insert bolts and hand-tighten.
5. Final Tightening: Once all parts are loosely assembled and aligned, gradually tighten all bolts using the provided Allen wrench. For faster assembly, a 10mm and 13mm socket wrench (not included) may be used. Do not overtighten.

Image 4.1: Dimensions of the VICLLAX Swivel Outdoor Chair. This diagram illustrates the chair's width, depth, and height measurements.

5. Operating Instructions (Usage)

Your VICLLAX Swivel Outdoor Chairs are designed for comfortable outdoor seating with a 360-degree rotation feature.

• Swivel Function: The chair's base allows for a smooth 360-degree rotation. To swivel, simply apply gentle pressure with your feet or body in the desired direction.
• Seating: Sit centrally on the chair. The ergonomic high backrest and curved armrests provide support and comfort.
• Outdoor Placement: These chairs are suitable for balconies, lawns, gardens, and other outdoor patio areas.

Image 5.1: 360-Degree Swivel Function of the VICLLAX Chair. A person is shown seated in the chair, with a circular arrow illustrating the full range of motion.

6. Maintenance

• Cleaning Fabric: The textilene fabric is quick-drying and easy to care for. Clean with mild soap and water, then rinse thoroughly and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
• Cleaning Frame: Wipe the metal frame with a damp cloth and mild soap. Dry thoroughly to prevent water spots.
• Rust Prevention: The metal frame features electrophoresis technology and a powder-coated finish for rust protection. To maintain this protection, avoid scratching the finish. If scratches occur, touch up with appropriate outdoor metal paint to prevent rust. Consider using protective pads on the base ring to minimize direct contact with abrasive surfaces.
• Seasonal Storage: For prolonged product life, especially in harsh winter conditions, consider storing the chairs indoors or covering them with weather-resistant furniture covers.

Image 6.1: Close-up of the Quick-Drying Textilene Fabric. This image highlights the breathable, fade-resistant, and pressure-resistant qualities of the chair's material.

7. Troubleshooting

• Chair Wobbles: Ensure all bolts are securely tightened. If wobbling persists, loosen all bolts slightly, sit in the chair to settle the frame, then retighten all bolts evenly.
• Swivel Mechanism is Stiff: Check for any obstructions around the swivel base. Apply a silicone-based lubricant to the swivel mechanism if necessary. Avoid oil-based lubricants that can attract dirt.
• Fabric Sagging/Damage: Ensure the weight capacity is not exceeded. For minor sagging, the fabric may regain tension over time. For significant damage, contact customer support for replacement options.
• Rust Spots: If rust spots appear, especially on the base, clean the area thoroughly, sand lightly to remove rust, and apply a rust-inhibiting primer followed by outdoor metal paint.

8. Specifications

9. Warranty Information

Specific warranty details for your VICLLAX Swivel Outdoor Chairs may vary. Please refer to the product listing or contact the seller directly for comprehensive warranty terms and conditions.

10. Customer Support

For any questions, concerns, or assistance with your VICLLAX Swivel Outdoor Chairs, please contact the seller, Hauzhood, through the platform where you made your purchase. Provide your order number and product model for faster service.

You can visit the VICLLAX Store for more information: VICLLAX Store on Amazon