Important Safety Information
Read all instructions carefully before beginning installation and save this manual for future reference. Improper installation or operation can lead to electric shock, fire, or personal injury.
- Always turn off power at the circuit breaker before installation or servicing.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Ensure the installation site can support the weight of the fan (approximately 15 kg / 33 lbs).
- Do not operate the fan with damaged wiring or if the fan is visibly damaged.
- Keep hands, clothing, and other objects away from the fan blades when the fan is operating.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Only use the remote control provided with the fan.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- Ceiling Fan Motor Assembly
- Fan Blades (Palm ABS)
- Light Kit Assembly
- Remote Control with Wall Mount
- Mounting Bracket
- Hardware Pack (screws, wire nuts, washers)
- Instruction Manual
Setup and Installation
This fan is designed for flush mount installation. Professional installation is recommended if you are not experienced with electrical wiring.
1. Prepare for Installation
- Turn off power at the main circuit breaker.
- Ensure the junction box is securely mounted and capable of supporting the fan's weight.
- Unpack all components and lay them out on a soft surface to prevent scratches.
2. Install Mounting Bracket
Attach the mounting bracket to the ceiling junction box using the screws and washers provided. Ensure it is firmly secured.
3. Assemble Fan Blades
Attach the palm-shaped ABS fan blades to the motor housing. Ensure all screws are tightened securely.
Image: Unique Fan Blade Design. This image illustrates the unique palm ABS fan blade design, highlighting how it increases contact area, air volume, and working area for efficient airflow.
4. Wiring the Fan
Connect the fan's electrical wires to the household wiring according to the wiring diagram in the separate wiring guide (if provided) or standard electrical practices. Use the provided wire nuts to secure connections. Ensure all connections are tight and insulated.
- Connect the black (hot) wire from the ceiling to the black wire from the fan.
- Connect the white (neutral) wire from the ceiling to the white wire from the fan.
- Connect the green or bare copper (ground) wire from the ceiling to the green or bare copper wire from the fan.
- Carefully tuck all wires into the junction box.
5. Secure Fan to Mounting Bracket
Carefully lift the fan assembly and attach it to the mounting bracket. Ensure all screws are tightened to prevent the fan from falling.
6. Install Light Kit
Connect the light kit wires to the corresponding wires from the fan motor assembly. Secure the light kit to the fan housing. Install the LED light panel and diffuser cover.
Image: 3-Level Adjustable LED Light. This image demonstrates the fan's integrated LED light, which can be adjusted to three color temperatures: 3000K (Warm white), 4500K (Natural white), and 6000K (Cool white). The light also features a memory function.
Operating Instructions
Your Surtime 8968 ceiling fan is operated by a remote control. Ensure the remote has fresh batteries installed.
Image: Remote Control. This image displays the remote control for the ceiling fan, featuring buttons for power, 6-speed fan control, light on/off, light color temperature adjustment, a 2-hour timer, and fan direction control. It highlights individual control for light and fan.
Remote Control Functions:
- Power Button (⏻): Turns the fan and light ON or OFF.
- Fan Speed Buttons (1-6): Adjusts the fan speed from 1 (lowest) to 6 (highest).
Image: 6 Speeds Adjustable Wind Speed. This image illustrates the fan's 6-speed settings, categorized as Soft Wind (speeds 1-2), Natural Wind (speeds 3-4), and Cool Wind (speeds 5-6). It also shows the Summer Mode with downward airflow for cooling.
- Light ON/OFF Button (💡): Turns the LED light ON or OFF.
- Light Color Temperature Button (CCT): Cycles through 3000K (Warm White), 4500K (Natural White), and 6000K (Cool White). The light has a memory function.
- Timer Button (2H): Sets the fan to turn off automatically after 2 hours.
Image: 2H Timer Setting and Silent DC Motor. This image highlights the fan's 2-hour timer function and its silent DC motor, which operates at a low noise level, with 35dB indicated as a typical operating sound.
- Fan Direction Button (Summer Mode): Changes the direction of the fan blades. In Summer Mode, blades rotate counter-clockwise to create a downward airflow, providing a cooling effect.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
- Blade Balance: If the fan wobbles, check that all blade screws are tight and that the blades are not bent or damaged.
- Light Kit: The LED light source is integrated and not user-replaceable. If the light fails, contact customer support.
- General Check: Periodically check all connections and mounting hardware for tightness.
Troubleshooting
Before attempting any repairs, ensure the power is turned off at the circuit breaker.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery low or not paired. | Check circuit breaker; Verify all wire connections are secure; Replace remote battery or re-pair remote (refer to remote pairing instructions if available). |
| Light does not work | Loose wire connection to light kit; Integrated LED failure. | Check light kit wiring; Contact customer support for LED light issues. |
| Fan wobbles | Loose fan blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Ensure blades are not bent; Tighten mounting bracket screws. |
| Remote control not working | Low battery; Obstruction between remote and receiver; Remote not paired. | Replace battery; Ensure clear line of sight; Refer to remote pairing instructions (if applicable). |
Specifications
Image: Product Dimensions and Specifications. This image provides key specifications including the fan's 46-inch diameter and 10.63-inch height. It also details a maximum fan speed of 175 RPM, 1800 lumens for the light, and recommended room dimensions (100-225 sq ft, 8-10 ft ceiling height).
| Feature | Detail |
|---|---|
| Model Number | 8968 |
| Brand | Surtime |
| Dimensions (D x W x H) | 116.8D x 116.8W x 33H cm (46" x 46" x 13") |
| Material | Plastic (Palm ABS Fan Blades) |
| Wattage | 75 watts |
| Noise Level | 45 dB (Silent DC Motor) |
| Control Method | Remote Control |
| Fan Speeds | 6 adjustable speeds |
| Light Type | Integrated LED (1800 LM) |
| Color Temperatures | 3000K (Warm White), 4500K (Natural White), 6000K (Cool White) with memory function |
| Timer Function | 2-hour automatic shut-off |
| Installation Type | Flush Mount |
| Recommended Room Size | 100-225 sq ft |
| Recommended Ceiling Height | 8-10 ft |
Warranty and Support
Surtime products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.
For technical assistance, missing parts, or warranty claims, please contact Surtime customer support through the retailer where the product was purchased or visit the official Surtime website.
Website: Surtime Official Store