EPZ EPZ-G30

EPZ G30 IEM Gaming Wired Earphones Instruction Manual

Model: EPZ-G30 | Brand: EPZ

1. Introduction

The EPZ G30 IEM (In-Ear Monitor) gaming wired earphones are engineered to deliver high-fidelity audio for both gaming and music. These earphones feature a 1DD+1BA hybrid driver system, a dedicated DAC decoding chip, and a detachable Type-C cable with an integrated microphone, ensuring clear sound and versatile connectivity for various devices.

2. What's in the Box

Your EPZ G30 package includes the following components:

  • EPZ G30 IEM Earphones (Left and Right units)
  • Detachable Type-C Cable with Microphone
  • Multiple Sets of Eartips (Small, Medium, Large)
  • Carrying Case
  • USB-C to USB-A Adapter
Contents of the EPZ G30 package, including earphones, cable, eartips, and case.

Image: EPZ G30 package contents.

3. Setup

3.1 Attaching the Cable

  1. Identify the left (L) and right (R) earphone units and the corresponding connectors on the detachable cable. The cable uses a 0.78mm 2-pin connector.
  2. Align the pins on the cable with the receptacles on the earphone units. Ensure correct orientation to avoid damage.
  3. Gently push the cable connectors into the earphone units until they are securely seated. Do not force the connection.

3.2 Selecting Eartips

The EPZ G30 includes multiple sizes of silicone eartips (S/M/L). Proper eartip selection is crucial for comfort, sound isolation, and optimal audio performance.

  • Experiment with different sizes to find the pair that creates a snug seal in your ear canal.
  • A good seal will enhance bass response and block out external noise effectively.

3.3 Connecting to Your Device

Connect the Type-C end of the cable to your compatible device (e.g., smartphone, tablet, gaming console, PC). If your device uses a USB-A port, use the provided USB-C to USB-A adapter.

4. Operating Instructions

4.1 Wearing the Earphones

The EPZ G30 earphones are designed for an over-ear fit, which provides stability and reduces microphonics (cable noise).

  1. Insert the earphone unit into your ear canal.
  2. Route the cable over the top and behind your ear. Adjust the cable to sit comfortably.
A person wearing the EPZ G30 earphones with the cable routed over the ear.

Image: Proper wearing of EPZ G30 earphones.

4.2 Using the Inline Controls

The detachable cable features an inline control unit with a microphone. This unit allows for basic audio control and communication.

  • Volume Up/Down: Use the '+' and '-' buttons to adjust the playback volume.
  • Play/Pause/Answer Call: Press the center button once.
  • Next Track: Press the center button twice.
  • Previous Track: Press the center button three times.
  • Microphone: The integrated microphone is used for voice chat during gaming or phone calls.

4.3 EQ Adjustment and Custom Tuning

The G30's Hi-Fi-grade DAC decoding chip includes DSP with a tuning memory function. You can customize sound settings for an optimized audio experience.

  • To download the tuning driver or access the official sound effect adjustment tools, please visit the official EPZ website.
  • Custom tuning is supported via an Android application or a PC web version.
Diagram showing custom tuning support via Android app and PC web interface.

Image: Custom tuning options for EPZ G30.

5. Features

  • 9.2mm DLC+PU Composite Film Driver: Features a Hi-Fi grade EPZ-customized 29689BA driver paired with a self-developed DLC+PU composite diaphragm. This design minimizes vibration distortion and delivers soft, bright sound suitable for music and gaming.
  • DAC Decoding Chip: Integrated Hi-Fi-grade DAC decoding chip supports 384kHz/32-bit HD PCM audio sources for clear playback. DSP with tuning memory function stores custom settings.
  • OFC Plated Cable: Equipped with a 1.7m detachable oxygen-free copper silver-plated cable to minimize signal loss. Offers Type-C connectivity.
  • Environmental Noise Cancellation (ENC): Combines a professional DAC audio decoding chip with EPZ’s exclusive audio circuit design for sound separation and anti-interference, resulting in minimal background noise.
  • Iridescent Resin Panels: The earphone shells feature iridescent resin panels that shift colors, providing a unique aesthetic. The skin-friendly resin material ensures comfortable wear.
Diagram illustrating zero background noise, simulated 7.1 surround sound, and HiFi level DAC gaming sound card features.

Image: Key audio features of the EPZ G30.

6. Maintenance

  • Cleaning: Regularly clean the eartips and earphone units with a soft, dry cloth. For eartips, you may use a mild soap solution and rinse thoroughly, ensuring they are completely dry before reattaching.
  • Storage: When not in use, store the earphones in the provided carrying case to protect them from dust, moisture, and physical damage.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable. Detach the cable by holding the connector, not the wire itself.
  • Water Resistance: The earphones are rated as waterproof. However, avoid prolonged submersion or exposure to high-pressure water jets. Ensure connectors are dry before use.

7. Troubleshooting

ProblemPossible CauseSolution
No sound or low volumeCable not fully connected; Device volume too low; Incorrect audio output selected on device.Ensure cable is securely attached to earphones and device. Increase device volume. Check device audio settings to confirm EPZ G30 is selected as output.
Poor sound quality (e.g., weak bass, tinny sound)Improper eartip seal; Cable connection loose; Damaged cable.Try different eartip sizes to achieve a secure seal. Re-seat the cable connectors. If sound quality issues persist, try a different cable if available.
Microphone not workingMicrophone muted on device; Incorrect input device selected; Cable not fully connected.Check device settings to ensure microphone is not muted and EPZ G30 is selected as the input device. Ensure the cable is fully connected.
Cannot adjust EQ settings via app/webIncorrect software version; Connectivity issue; Driver not installed.Ensure you have the correct and latest version of the app/web tool. Verify device connectivity. Visit the official EPZ website for tuning driver downloads and support.

8. Specifications

FeatureDetail
BrandEPZ
Model NumberEPZ-G30
ColorBlue (Aurora Fantasy)
Ear PlacementIn Ear
Form FactorIn Ear
Impedance14 ohm
Sensitivity105dB (±3dB)
Frequency Response20Hz-20kHz
Audio Driver Type1 Dynamic Driver + 1 Balanced Armature
Noise ControlEnvironmental Noise Cancellation
Connectivity TechnologyWired
Headphone JackType-C
Pin Type0.78mm 2-Pin
Cable Length1.7m (approx. 5.6 ft)
Cable MaterialOFC Silver-Plated
Earcup Material3D-Printed Resin
Water Resistance LevelWaterproof
Compatible DevicesLaptops, Desktops, Gaming Consoles, Tablets, Telephones, Smart Speaker, Television, Cellphones
Additional FeaturesDetachable Cable, Lightweight, Microphone Included, Surround Sound

9. Warranty and Support

The EPZ G30 IEM earphones come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For technical support, tuning driver downloads, warranty claims, or any other assistance, please visit the official EPZ website or contact EPZ customer service directly through their provided channels.

10. Product Images

EPZ G30 IEM earphones, showcasing their iridescent blue and purple design.
EPZ G30 IEM earphones, iridescent design.
Close-up view of the EPZ G30 IEM earphones, highlighting the detailed craftsmanship.
Close-up of EPZ G30 earphones.
EPZ G30 earphones depicted as light and comfortable, resting on a feather.
Lightweight and comfortable design.
A gamer using EPZ G30 IEM earphones during a gaming session.
EPZ G30 in a gaming environment.

11. Product Videos

EPZ G30 IEM Wired Earphones Overview

This video provides a brief overview of the EPZ G30 IEM wired earphones, showcasing their design and key features. (Duration: 0:13)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.