Feonase Armoire Wardrobe Closet with Mirror (Model FEO977A1FBM) Instruction Manual

Important Safety Information

WARNING: Always assemble and secure the cabinet to the wall using the provided anti-tip devices to prevent tip-over hazards. Ensure the cabinet is level and stable before use. Failure to do so can result in serious injury or death.

Keep all small parts and packaging materials away from children and pets during assembly to prevent choking hazards.

Introduction

Thank you for purchasing the Feonase Armoire Wardrobe Closet with Mirror. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new furniture. Please read this manual thoroughly before beginning assembly and retain it for future reference.

Package Contents

Before assembly, verify that all parts and hardware listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Hardware List:

Panel List:

• Top Panel
• Side Panels (Left, Right, and Internal)
• Bottom Panel
• Shelves (Fixed and Adjustable)
• Back Panels
• Doors (One with Mirror, One Plain)
• Drawer Components (Front, Sides, Back, Bottom)

Note: Refer to the assembly video for visual identification of each numbered panel.

Assembly Instructions

Follow these steps carefully to assemble your Feonase Armoire Wardrobe Closet. It is recommended to have two people for assembly.

Assembly Video Guide:

Step-by-Step Assembly:

1. Prepare the Base: Lay the bottom panel (refer to video for visual identification) flat on a clean, soft surface. Attach the drawer slides (CR, CL) to the designated positions using screws (E*3).

   

   Image: The bottom panel of the wardrobe with drawer slides being attached. This shows the initial setup for the base structure.

2. Attach Side Panels: Insert cam bolts (C*2) into the main side panels. Connect these side panels to the bottom panel using cam locks (B*7).

3. Install Top Panel: Place the top panel onto the assembled side panels. Secure it with cam locks (B*7) and screws (A*9).

4. Assemble Inner Structure: Attach the smaller internal side panels and shelves to the main structure using cam bolts (C*2) and screws (D*2, A*2).

5. Complete the Main Frame: Attach any remaining side panels and secure them with screws (D*10, A*10) and cam bolts (C*8).

6. Install Back Panels: Slide the back panels into the grooves on the rear of the cabinet. Secure them with screws (A*8) and brackets (G*6).

7. Insert Shelves: Place the fixed and adjustable shelves into their respective positions. Use shelf pins (Q*2) for the adjustable shelf.

   

   Image: An interior view of the wardrobe showing the installed shelves and the hanging rod, ready for use.

8. Assemble Doors: Attach hinges (K*12) to the door panels (one with mirror, one plain) using screws (F*12). Install magnetic catches (H*2) on the doors and frame. Attach door handles (N*6) to the doors.

   

   Image: Detailed view of the metal hinges, magnetic catch, and drawer construction, highlighting key hardware components.

9. Install Hanging Rod: Insert the hanging rod (J) into the designated supports in the upper section of the wardrobe.

   

   Image: The fully assembled wardrobe with clothes hanging on the rod and items stored on shelves, demonstrating its capacity.

10. Assemble Drawer: Connect the drawer side panels and back panel to the drawer front panel using dowel pins (A*5) and cam locks (B*4). Slide the drawer bottom panel into the grooves. Attach the drawer slides (DL, DR) to the drawer using screws (E*4). Install the drawer knob (M*1).

11. Insert Drawer: Carefully slide the assembled drawer into the designated compartment in the wardrobe.

12. Install Anti-Tip Kit: Secure the anti-tip kit (L) to the top rear of the wardrobe and to a wall stud using appropriate wall anchors (not always included, check local hardware store). This step is crucial for safety.

Operating Instructions

Using the Doors:

The wardrobe features two hinged doors. Gently pull the handles to open and push to close. The magnetic catches will help keep the doors securely shut.

Adjusting Shelves:

The adjustable shelf can be repositioned to suit your storage needs. To adjust, remove items from the shelf, lift the shelf, remove the shelf pins (Q), and reinsert them into the desired holes. Then, place the shelf back onto the pins.

Using the Drawer:

The drawer operates on smooth-glide rails. Pull the knob to open and push to close. Avoid overloading the drawer to ensure smooth operation and prevent damage to the slides.

Mirror Care:

The integrated mirror provides a full-length reflection. Clean the mirror with a soft, lint-free cloth and a glass cleaner. Avoid abrasive cleaners or materials that could scratch the surface.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Hardware Check: Periodically check all screws, bolts, and connections to ensure they are tight. Retighten if necessary to maintain stability.
• Moisture Protection: Avoid placing the wardrobe in areas with high humidity or direct sunlight to prevent warping or discoloration.
• Weight Distribution: Distribute weight evenly across shelves and in the drawer to prevent stress on the structure.

Troubleshooting

Specifications

Warranty and Customer Support

For warranty information or assistance with your Feonase Armoire Wardrobe Closet, please refer to the documentation included with your purchase or contact Feonase customer support directly. You can often find contact details on the manufacturer's website or through your retailer.

When contacting support, please have your model number (FEO977A1FBM) and purchase date available.