Bestier 63 Inch TV Stand with Storage (Model G701016A-BDCF) Instruction Manual

Introduction

Thank you for choosing the Bestier 63 Inch TV Stand with Storage. This manual provides detailed instructions for assembly, operation, and maintenance of your new entertainment center. Please read this manual thoroughly before beginning assembly and retain it for future reference. This TV stand is designed to accommodate TVs up to 75 inches and features six fabric drawers, open display shelves, and an integrated LED light strip.

Safety Information

Important Safety Precautions:

• Do not exceed the weight limit of 200 lbs (90.7 kg) on the tabletop.
• Each mesh shelf supports a maximum weight of 33 lbs (15 kg).
• Each fabric drawer supports a maximum weight of 15 lbs (6.8 kg).
• Always use the provided anti-tip kit to secure the TV stand to a wall, preventing accidental tipping and potential injury.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts and packaging materials away from children during assembly.
• Assemble the unit on a soft, clean surface to prevent scratches.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• TV Stand components (engineered wood panels, metal frame parts)
• LED Strip Light
• 6 Non-woven Fabric Drawers
• Assembly Hardware (screws, bolts, connectors)
• Assembly Tools (e.g., Allen wrench)
• Anti-Tip Kit
• Instruction Manual

Assembly Instructions

Assembly of this TV stand is designed to be straightforward. Each accessory is labeled, and detailed operating instructions are provided in the included manual. It is recommended to assemble the unit with at least two people.

Step-by-Step Assembly Overview:

1. Unpack and Identify Parts: Carefully unpack all components and hardware. Refer to the parts list in the separate assembly guide to identify each piece.
2. Assemble the Frame: Begin by connecting the metal frame components using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the frame is complete. The X-shaped steel frame provides enhanced stability.
3. Attach Wood Panels: Secure the engineered wood panels to the assembled metal frame. This includes the tabletop and internal shelves.
4. Install Adjustable Feet: Screw the adjustable feet into the bottom of the stand's legs. Adjust them as needed to ensure the stand is level on uneven floors.
5. Assemble Fabric Drawers: The fabric drawers are designed for easy assembly in three steps:
   • Step 1: Unfold the fabric drawer.
   • Step 2: Insert the bottom support panel into the drawer.
   • Step 3: Place the drawer into its designated slot in the TV stand.
   

   Image: Visual guide for assembling the fabric drawers in three simple steps.

6. Install LED Light Strip: Adhere the LED light strip to the designated areas within the open shelves. Connect it according to the separate LED light instructions.
7. Secure with Anti-Tip Kit: Attach the anti-tip kit to the back of the TV stand and to a wall stud using the provided hardware. This is crucial for safety, especially in households with children or pets.
   

   Image: Diagram illustrating the proper installation of the anti-tip kit to secure the TV stand to a wall.

8. Final Tightening: Once all components are in place, fully tighten all screws and fasteners.

Product Features

Ample Storage Space

This TV stand is equipped with six fabric drawers and open display shelves, offering generous space for organizing media devices, game consoles, books, speakers, and other daily essentials. This design helps maintain a tidy living area.

Image: The TV stand showcasing its six fabric drawers and open shelves, ideal for storing various items like books, toys, and media devices.

Integrated LED Light Strip

Enhance your entertainment experience with the integrated LED light strip. It offers 22 colors and 22 dynamic modes, allowing for personalized ambiance in your living room, gaming setup, or home theater.

Image: The TV stand with its LED light strip activated, displaying various colors and modes, controlled by a remote.

Sturdy and Durable Construction

Constructed from premium particleboard and a reinforced metal frame with an X-shaped steel design, this TV stand ensures stability and durability. The tabletop supports up to 200 lbs, each mesh shelf 33 lbs, and each fabric drawer 15 lbs.

Industrial Style Design

The drawer fronts feature a carbon fiber textured finish, providing a modern and contemporary aesthetic that complements industrial or minimalist home decor styles.

Durable Top Board

The tabletop is designed with a scratch-resistant, water, and moisture-resistant surface, making it easy to clean and maintain its appearance over time.

Image: Close-up view of the TV stand's top board, highlighting its scratch-resistant, water-resistant, and easy-to-clean properties.

Adjustable Feet

The TV stand is equipped with adjustable feet, allowing you to level the unit on uneven floor surfaces and protect your flooring from scratches.

Operating Instructions

Using the LED Light Strip

The LED light strip is controlled via a remote control. Point the remote at the receiver connected to the LED strip.

• Power On/Off: Press the power button on the remote to turn the lights on or off.
• Color Selection: Use the color buttons to select from 22 available static colors.
• Dynamic Modes: Choose from 22 dynamic modes to create various lighting effects.
• Brightness/Speed Adjustment: Adjust the brightness of static colors or the speed of dynamic modes using the designated buttons.

Utilizing Storage

The six fabric drawers are ideal for concealing clutter, while the open shelves are suitable for displaying media players, speakers, or decorative items. Ensure items placed in drawers and on shelves do not exceed their respective weight limits.

Maintenance

• Cleaning: Wipe the surfaces of the TV stand with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish. The carbon fiber textured surface is water and moisture resistant and easy to clean.
• Fabric Drawers: The non-woven fabric drawers can be spot cleaned with a mild detergent and water. Allow them to air dry completely before returning them to the stand. Do not machine wash.
• Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
• LED Strip: Ensure the LED strip and its connections are free from dust and debris.

Troubleshooting

• Missing Parts: If any parts are missing upon unboxing, please refer to the package contents list and contact Bestier customer support for assistance.
• Stability Issues:
  • Ensure all assembly screws are fully tightened.
  • Adjust the leveling feet at the bottom of the stand to compensate for uneven floors.
  • Verify that the anti-tip kit is correctly installed and securely anchored to a wall stud.
• LED Lights Not Working:
  • Check that the power adapter is securely plugged into a working outlet and the LED strip.
  • Ensure the remote control has working batteries and is pointed directly at the receiver.
  • Inspect the LED strip for any visible damage or loose connections.
• Damaged During Assembly: If a part becomes damaged during assembly, contact customer support for replacement parts. Avoid forcing components together.

Specifications

Image: Diagram illustrating the overall dimensions of the TV stand and the weight capacities for the tabletop, shelves, and drawers.

Warranty and Support

Specific warranty information and customer support contact details are not provided within this manual. For warranty claims, replacement parts, or further assistance, please refer to the purchase documentation or contact the retailer where the product was purchased. You may also visit the official Bestier website for general support information.