DUMOS TV Stand Dresser with LED Lights and Charging Station

1. Product Overview

The DUMOS TV Stand Dresser is a versatile furniture piece designed for entertainment and storage. It features nine fabric drawers, open shelves, integrated LED lighting, and a built-in charging station. This unit is suitable for TVs ranging from 45 to 55 inches.

Key Features:

• Massive Storage: Nine soft-closing fabric drawers and open shelves provide ample space for media components, games, books, and remote controls, helping to reduce clutter.
• Built-In Charging Station: Equipped with 2 AC sockets and 2 USB ports to conveniently power and charge your devices.
• Customizable LED Lighting: Integrated LED lights enhance your viewing experience and room ambiance.
• Multi-Functional Design: Serves as a TV stand, dresser, and media console, suitable for living rooms or bedrooms.
• Sturdy Construction: Features a robust wood top and a strong metal frame, supporting up to 160 lbs.

2. Safety Information

• Do not load more than 160 lbs on the unit.
• Keep away from children and pets to prevent accidents.
• Exercise caution around sharp edges during assembly and use.
• Ensure all screws and fasteners are securely tightened before use.
• Use the included anti-tilt device to secure the unit to a wall, preventing tipping.

3. Setup Instructions

Assembly is required for this product. Please follow the steps below carefully. An assembly video is provided for visual guidance.

Assembly Video:

Step-by-Step Assembly:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Refer to the parts list in your physical manual to ensure all pieces are present.
2. Assemble the Base Frame: Attach the adjustable feet to the bottom metal frame sections. Connect the side frames using the horizontal support bars and secure with screws.
3. Install the Top Board: Place the main wooden top board onto the assembled metal frame. Secure it using the provided screws.
4. Attach the Back Panel: Secure the wooden back panel to the rear of the unit, aligning it with the pre-drilled holes.
5. Install LED Lights: Connect the LED light strip to the power cable. Peel off the adhesive backing and carefully attach the LED strip to the designated area on the back panel. Use the provided clips and screws to further secure the LED strip.
6. Install Drawer Supports: Insert the metal drawer supports into the designated slots within the frame. Ensure they are firmly in place to support the fabric drawers.
7. Attach Anti-Tilt Device: Secure the anti-tilt strap to the back of the unit and then to a wall stud using appropriate hardware. This is crucial for stability and safety.
8. Assemble Fabric Drawers: Insert the bottom panel into each fabric drawer and attach the handles.
9. Insert Drawers: Place the assembled fabric drawers into their respective compartments in the frame.
10. Install Charging Station: Insert the charging station unit into the cutout on the top board. Secure it with screws and plug the power cord into a wall outlet.

4. Operating Instructions

Using the LED Lights:

The integrated LED lights can be controlled to create various ambiances. Refer to the specific instructions provided with the LED light kit for details on using the remote control or any associated mobile application to change colors, brightness, and lighting modes.

Using the Charging Station:

The built-in charging station provides convenient power access for your electronic devices.

• Plug the charging station's power cord into a standard wall outlet.
• Use the 2 AC outlets for devices requiring standard power plugs.
• Use the 2 USB ports (Type-A and Type-C) to charge compatible devices such as smartphones, tablets, or other USB-powered accessories.

5. Maintenance

Product Care Instructions:

• Wipe the wood and metal surfaces with a dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• For fabric drawers, spot clean with a damp cloth and mild detergent if necessary. Allow to air dry completely.
• Periodically check all screws and connections to ensure they remain tight. Retighten if needed.

6. Troubleshooting

Common Issues and Solutions:

• LED Lights Not Working:
  • Ensure the LED strip is properly connected to its power source.
  • Check if the power adapter is securely plugged into a working wall outlet.
  • Verify that the remote control battery is functional and the remote is pointed correctly at the receiver.
• Charging Station Not Providing Power:
  • Confirm the charging station's power cord is fully plugged into a live wall outlet.
  • Test the wall outlet with another device to ensure it is functional.
  • Ensure your device's charging cable is properly connected to the charging station and your device.
• Unit Feels Unstable:
  • Verify that all assembly screws are tightened.
  • Adjust the leveling feet on the bottom of the unit to compensate for uneven floors.
  • Ensure the anti-tilt device is properly installed and secured to a wall stud.

7. Specifications

8. Warranty and Support

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact DUMOS customer service directly. Contact details are typically found on the product packaging or the manufacturer's official website.