Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your DUMOS 9-Drawer Fabric Dresser. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This dresser is designed as a versatile storage solution for various rooms, including bedrooms, closets, entryways, and guest rooms.
The dresser features a sturdy metal frame, a durable wooden top, and nine spacious fabric drawers. It is designed for stability and ease of use.
Safety Information
- Always assemble the dresser on a soft, clean surface to prevent scratches.
- Ensure all screws are tightened securely before use. Do not overtighten.
- Use the provided anti-tipping accessories to secure the dresser to a wall, especially if children are present. This prevents accidental tipping and potential injury.
- Do not exceed the maximum weight capacity for the top board or individual drawers.
Parts List
Before assembly, verify that all parts are present and undamaged. Refer to the diagram below for identification.
Figure 1: All components included in the DUMOS 9-Drawer Fabric Dresser package.
- Frames: Left Frame (A), Right Frame (B), Middle Frame (C), Top Frame (D)
- Crossbars: Top Cross (E), Bottom Cross (F)
- Slats: Right Slats (R), Left Slats (L)
- Boards: Top Board (P), Drawer Base Board (G)
- Drawers: Big Drawer (K), Small Drawer (N)
- Hardware: Drawer Handle (6), Screws (2), Screws (4), Expansion Tube (5), Screws (5)
Setup Instructions
Follow these steps to assemble your DUMOS 9-Drawer Fabric Dresser. It is recommended to have two people for assembly.
Video Guide: Dresser Assembly
Video 1: Step-by-step assembly guide for the DUMOS 9-Drawer Dresser.
Step-by-Step Assembly
- Attach Frames to Top Board: Fix the Right-Left Frames (A & B) to both ends of the Top Board (P). Fix the Top Frame (D) to the middle of the Top Board (P) using Screws (2) * 6. Ensure the drawer holes on Frames (A), (B), and (D) face the same direction.
Figure 2: Securing the main frame components to the top board.
- Install Middle Frame: Install the other side of Middle Frame (C) * 1 to the Top Cross (E) * 2 using Screws (2) * 2. Ensure the drawer holes on Frames (A), (B), and (C) face the same direction.
Figure 3: Attaching the middle frame to the top crossbars.
- Install Top Crossbars: Install Top Cross (E) * 2 to the top of Frames (A, B & D) with Screws (2) * 8.
- Install Bottom Crossbars: Install Bottom Cross (F) * 2 to the Frames (A, B & C) with Screws (2) * 6.
- Install Adjusting Feet: Install Adjusting Foot (1) * 4 to the Side Frames (A & B).
- Assemble Drawer Slats: Assemble the Left Slats (L) * 9 and Right Slats (R) * 9 bars to the frame (A, B & C & D). Tighten screws AFTER Drawer sliders are assembled.
Figure 4: Attaching the plastic drawer slats to the metal frame.
- Assemble Drawers: Place Drawer Base Board (G) * 3 into the expanded Small Drawer (N) * 3. Install the Drawer Handle (6) * 3 with Screws (4) * 6. Install the three Small Drawers (N) * 3 in the same way. Repeat for Big Drawers (K) * 6 and Drawer Base Board (H) * 6, installing Drawer Handle (6) * 6 with Screws (4) * 12.
Figure 5: Steps for assembling the fabric drawers.
- Insert Drawers: Put the installed Small Drawers (N) * 3 and Big Drawers (K) * 6 into the frame in turn.
Figure 6: The fully assembled DUMOS 9-Drawer Fabric Dresser.
- Secure to Wall (Optional but Recommended): If you need to fix the dresser to the wall, drill holes in the wall with an electric drill, then insert Expansion Tube (5) * 2 and fix the dresser with Screws (5) * 2.
Operating Instructions
Using the Drawers
- To open a drawer, gently pull the handle.
- To close a drawer, push it back into the frame until it is fully seated.
- Avoid forcing drawers open or closed to prevent damage to the fabric or frame.
- Distribute items evenly within the drawers to maintain balance and prevent strain on the drawer slides.
Weight Capacity
The wooden top board has a maximum capacity of 66 pounds. Each fabric drawer has a maximum capacity of 13 pounds. Do not exceed these limits to ensure the longevity and stability of the dresser.
Figure 7: Dresser dimensions and weight capacity information.
Maintenance
Cleaning
- Wooden Top: Wipe with a dry cloth to remove dust and spills. Avoid abrasive cleaners or excessive moisture.
- Metal Frame: Wipe with a soft, damp cloth. Dry immediately to prevent rust.
- Fabric Drawers: Spot clean with a mild detergent and a damp cloth. Allow to air dry completely. Do not machine wash or tumble dry.
General Care
- Periodically check all screws and connections to ensure they remain tight. Tighten as needed.
- Avoid placing hot items directly on the wooden top. Use coasters or protective pads.
- Keep the dresser away from direct sunlight and excessive humidity to prevent material degradation.
Troubleshooting
If you encounter any issues with your dresser, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser feels wobbly or unstable. | Screws are loose; uneven floor. | Tighten all assembly screws. Adjust the leveling feet on the bottom of the frame to stabilize. Ensure the dresser is placed on a flat surface. |
| Drawers do not slide smoothly. | Drawer base board not fully inserted; items obstructing movement; plastic sliders misaligned. | Ensure the drawer base board is fully inserted and flat. Check for any items inside the drawer or on the frame that might be blocking movement. Verify that the plastic sliders are correctly installed and not damaged. |
| Drawer handle is loose. | Handle screws are loose. | Tighten the screws that secure the handle from inside the drawer. |
| Missing or damaged parts. | Manufacturing defect or shipping damage. | Do not attempt to force assembly. Contact DUMOS customer support for replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DUMOS |
| Model Name | Dresser for Bedroom |
| Model Number | KACAB-AS9BC-BKWD-01 |
| Product Dimensions | 11.8"D x 39.4"W x 39.4"H |
| Color | Black Wood |
| Room Type | Bedroom |
| Material | Engineered Wood (Top Board), Fabric (Drawers), Metal (Frame) |
| Finish Type | Wood |
| Number of Drawers | 9 (3 small, 6 large) |
| Item Weight | 29 Pounds |
| Top Board Capacity | 66 lbs |
| Drawer Capacity | 13 lbs per drawer |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
| UPC | 715569016347 |
Warranty Information
DUMOS products are manufactured with quality and care. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and to make a claim, please retain your proof of purchase and contact DUMOS customer support. The warranty typically covers manufacturing defects and does not cover damage resulting from improper assembly, misuse, neglect, or normal wear and tear.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact DUMOS customer support. Our team is dedicated to providing prompt and helpful solutions.
- Email: Refer to your product packaging or purchase documentation for the most current contact email.
- Online Support: Visit the official DUMOS website or the retailer's support page where you purchased the product.
Please have your model number (KACAB-AS9BC-BKWD-01) and proof of purchase ready when contacting support.
