Tribesigns 70.9-Inch Extra Long Entryway Table with 3 Drawers - Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Tribesigns 70.9-Inch Extra Long Entryway Table with 3 Drawers. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Tribesigns 70.9-Inch Extra Long Entryway Table, showcasing its sleek design and ample surface area.

2. Safety Information

Warning: This table requires assembly. Always follow the assembly instructions carefully to ensure stability and safety. Do not exceed the maximum weight recommendation of 88 pounds to prevent tipping or collapse.

• Keep all small parts and packaging materials away from children and pets.
• Assemble the unit on a soft, clean surface to prevent scratches.
• Ensure all connections are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand or climb on the table.
• Distribute weight evenly across the tabletop and shelves.

3. Package Contents

Before assembly, verify that all components and hardware are present and undamaged. Refer to the included assembly guide for a complete list of parts. An unboxing video is provided below for visual reference.

An overview of all table components and hardware laid out before assembly.

4. Assembly Instructions

Follow the steps below and refer to the installation video for a visual guide. Tools recommended for assembly include an Allen Key and a screwdriver, which are typically included.

Step-by-Step Guide:

1. Prepare Components: Lay out all wooden panels and hardware. Identify each part using the labels in the assembly guide.
2. Assemble Side Panels: Attach the drawer slides (CR and CL) to the designated side panels using the provided screws. Ensure correct orientation as shown in the video.
3. Construct Main Frame: Connect the top panel, bottom shelf, and side panels using the cam locks and dowels. Secure with screws as indicated.
4. Install Back Panel: Attach the back panel to the main frame using the small nails or screws provided. This adds stability to the structure.
5. Assemble Drawers: For each drawer, attach the side panels to the front and back panels. Secure the bottom panel. Install the drawer pulls and the corresponding drawer slides (DR and DL).
6. Insert Drawers: Carefully slide the assembled drawers into their respective slots in the main frame. Ensure they glide smoothly.
7. Adjust Foot Pads: If included, adjust the non-slip foot pads at the base of the table to ensure stability and prevent scratching your floor.

Detailed view of the fluted drawer fronts, smooth drawer slides, and adjustable non-slip foot pads.

5. Operating Instructions

Your Tribesigns Entryway Table is designed for both display and storage. The three drawers provide concealed storage, while the open shelf offers additional space for larger items or decorative pieces.

The table features three drawers and a spacious open shelf for versatile storage and display.

• Using the Drawers: Gently pull the drawer knobs to open and push to close. Avoid forcing the drawers to prevent damage to the slides.
• Utilizing Shelves: The top surface and bottom shelf can hold various items. Ensure items are placed securely and do not exceed the maximum weight capacity.

6. Maintenance and Care

Proper care will extend the life and appearance of your entryway table.

• Cleaning: Wipe with a dry cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Immediately blot any spills with a clean, dry cloth.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
• Heat and Moisture: Do not place hot items directly on the surface. Use coasters or protective pads. Protect from excessive moisture.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as needed.

7. Troubleshooting

Common Issues:

• Wobbly Table: Ensure all screws are tightened. Check if the table is on an even surface; adjust the foot pads if necessary.
• Drawers Not Sliding Smoothly: Verify that the drawer slides are correctly installed and aligned. Check for any obstructions in the tracks.
• Missing Parts: If any parts are missing or damaged upon arrival, contact customer support immediately for assistance.

8. Specifications

Key dimensions of the entryway table, including length, depth, and height.

9. Warranty and Support

For warranty information, missing parts, or any other product-related inquiries, please contact Tribesigns customer support. Refer to your purchase documentation or the official Tribesigns website for contact details.