Elitech ANE-200W Bluetooth Digital Anemometer User Manual

1. Introduction

The Elitech ANE-200W is a handheld digital anemometer designed for accurate measurement of wind speed, air volume (CFM/CMM), and temperature. It features Bluetooth connectivity for real-time data monitoring and export via a mobile application, as well as USB connectivity for PC data management. This device is suitable for various applications including HVAC system testing, outdoor activities, drone operations, and environmental monitoring.

2. Key Features

• Bluetooth App Control: Connects to Elitech App (iOS & Android) for real-time data, graph view, and CSV export.
• Multi-Parameter Measurement: Measures wind speed, air volume (CFM/CMM), and temperature.
• Multiple Wind Units: Supports m/s, km/h, mph, knots, ft/min, and Beaufort scale.
• USB Data Export: Allows connection to PC for data reading, analysis, and long-term recording.
• Backlit LCD Display: Large display with backlight for clear visibility, supporting MAX, MIN, AVG, and HOLD functions.
• Compact and Portable: Designed for convenient on-the-go measurements in HVAC and field use.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition.

• Elitech ANE-200W Digital Anemometer
• 9V Battery (included)
• USB Cable
• Carry Strap
• Soft Carrying Case
• User Manual

Figure 3.1: Elitech ANE-200W package contents. The image displays the anemometer, a soft carrying case, a lanyard, a 9V battery, and a USB-A to micro USB cable.

4. Setup

4.1. Battery Installation

The Elitech ANE-200W typically comes with a 9V battery pre-installed. If replacement is needed:

1. Locate the battery compartment on the back of the device.
2. Open the battery cover.
3. Insert a new 9V battery, ensuring correct polarity.
4. Close the battery cover securely.

4.2. Attaching the Lanyard

Attach the provided lanyard to the designated loop on the anemometer for secure handling during use.

5. Operating Instructions

5.1. Power On/Off

• To power on, press the LED button.
• To power off, press and hold the LED button for approximately 2 seconds.

5.2. Display Functions

The large LCD displays real-time measurements. The display includes:

• Wind Speed: Shown in selected units (m/s, km/h, mph, knots, ft/min, Beaufort).
• Temperature: Displayed in Celsius or Fahrenheit.
• Relative Humidity: Displayed as a percentage.
• Air Volume (CFM/CMM): Calculated and displayed.

Figure 5.1: The anemometer's display showing wind speed, temperature, and humidity readings. The device is held in a hand with a tent and ocean in the background.

5.3. Button Functions

5.4. Changing Measurement Units

Press the UNIT DOWN button to cycle through available wind speed units (m/s, km/h, mph, knots, ft/min) and temperature units (°C, °F).

Figure 5.2: The anemometer displaying wind speed in m/s and temperature in Celsius, with various unit options highlighted around the image.

5.5. Bluetooth Connectivity

The Elitech ANE-200W can connect to the Elitech App on iOS and Android devices for enhanced functionality.

1. Download the "Elitech App" from your device's app store.
2. Ensure Bluetooth is enabled on your mobile device.
3. Open the Elitech App and follow the on-screen instructions to pair with the ANE-200W.
4. Once connected, you can view real-time data, historical graphs, and export data in CSV format.

Figure 5.3: The anemometer wirelessly connected to a mobile application, displaying real-time data, historical graphs, and data export options.

5.6. USB Data Export

For detailed analysis and long-term recording, connect the anemometer to a PC via USB.

1. Connect the anemometer to your PC using the provided USB cable.
2. Visit the Elitech website to download the dedicated PC software for the ANE-200W.
3. Install and launch the software.
4. Follow the software instructions to read, analyze, and export data. The device can store up to 960 data sets.

Figure 5.4: The anemometer connected to a laptop via a USB cable, demonstrating its data export capabilities to a PC software interface.

6. Applications

The Elitech ANE-200W is a versatile tool suitable for a wide range of professional and recreational uses:

• HVAC Systems: Testing ventilation, air conditioning, and heating systems for optimal airflow.
• Outdoor Activities: Assessing wind conditions for drone flights, sailing, paragliding, and other outdoor sports.
• Industrial Equipment: Monitoring airflow in industrial settings and equipment.
• Environmental Monitoring: Basic wind and temperature data collection.

Figure 6.1: A collage illustrating various applications of the anemometer, including HVAC systems, construction sites, drone operation, and educational settings.

7. Maintenance

7.1. Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the impeller is free from dust and debris for accurate readings.

7.2. Storage

Store the anemometer in its protective carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

7.3. Battery Replacement

Replace the 9V battery when the low battery indicator appears on the display.

8. Troubleshooting

9. Specifications

Figure 9.1: The anemometer displaying its measurement capabilities and ranges on its screen, alongside a detailed specification table.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact Elitech Technology Inc. directly. Refer to the official Elitech website or the contact information provided in your product packaging for the most up-to-date support details.

Elitech Technology Inc.
Official Website

11. Product Videos