1. Introduction
The Lemorele 13-in-1 USB-C Docking Station (Model TC500) is designed to significantly expand the connectivity of your USB-C enabled laptop. This versatile docking station provides multiple ports for external displays, various peripherals, network access, and power delivery, offering a comprehensive solution to enhance your workspace and productivity. It supports triple monitor setups, making it ideal for users requiring extensive display configurations.
Figure 1: Lemorele 13-in-1 USB-C Docking Station (Model TC500)
2. Product Features and Port Layout
The TC500 docking station integrates a wide array of ports to meet diverse connectivity needs:
- Video Output: 2x HDMI 2.0 ports (up to 4K@60Hz) and 1x DisplayPort 1.2 (up to 4K@60Hz). Supports triple monitor extended display configurations. Note: For triple 4K@30Hz output, DisplayPort requires Display Stream Compression (DSC) support from the host device.
- Power Delivery: 1x USB-C Power Delivery port, supporting up to 100W charging for your laptop (requires a compatible USB-C power adapter, not included).
- Data Transfer: Multiple USB ports including 1x USB-C 3.0 and 3x USB-A ports (mix of USB 3.0 and USB 2.0 for various peripherals).
- Network: 1x Gigabit Ethernet (RJ45) port for stable and high-speed wired internet connection.
- Card Reader: Integrated SD and TF (Micro SD) card slots for convenient data transfer from memory cards.
- Audio: 1x 3.5mm Audio/Microphone combo jack for headphones or speakers.
Figure 2: Port layout of the Lemorele TC500 Docking Station
3. Package Contents
Please check the package for the following items:
- 1x Lemorele 13-in-1 USB-C Docking Station (Model TC500)
- 1x USB-C to USB-C Cable (1.0 meter)
- 1x User Manual
4. Setup Instructions
Follow these steps to set up your docking station:
- Connect Power (Optional but Recommended): If your laptop requires charging via the docking station, connect your laptop's original USB-C power adapter (or a compatible 100W USB-C PD charger) to the USB-C PD input port on the docking station.
- Connect to Laptop: Use the provided 1.0-meter USB-C to USB-C cable to connect the docking station's host port to a full-featured USB-C port on your laptop. Ensure your laptop's USB-C port supports video output (DisplayPort Alternate Mode) and power delivery for full functionality.
- Connect Displays: Connect your external monitors to the HDMI and/or DisplayPort outputs on the docking station using appropriate cables.
- Connect Peripherals: Plug in your USB devices (keyboard, mouse, external hard drives, etc.) into the available USB-A and USB-C data ports. Connect your Ethernet cable to the RJ45 port for wired network access. Insert SD/TF cards as needed.
- Connect Audio: If desired, connect headphones or speakers to the 3.5mm audio jack.
Figure 3: Typical connection diagram for the docking station
5. Operating Instructions
5.1. Display Configuration
After connecting your monitors, your operating system should automatically detect them. You may need to adjust display settings:
- Windows: Right-click on the desktop, select 'Display settings'. Here you can arrange your displays, choose between 'Extend these displays' or 'Duplicate these displays', and set resolutions and refresh rates.
- macOS: Go to 'System Settings' (or 'System Preferences') > 'Displays'. You can arrange displays, set resolutions, and choose between 'Mirror Displays' or 'Use as separate displays'. Note that macOS may have limitations on the number of extended displays, especially with certain MacBook models.
The docking station supports single, dual, and triple monitor setups. Ensure your laptop's graphics card and USB-C port support the desired display configuration and resolutions.
Figure 4: Example of a triple display setup with the docking station
5.2. Power Delivery
When a compatible USB-C power adapter is connected to the PD port, the docking station will pass through up to 100W of power to charge your connected laptop. This allows you to power your laptop and use all connected peripherals with a single USB-C cable connection.
5.3. Data Transfer
The USB 3.0 ports offer high-speed data transfer for external storage devices, while the USB 2.0 ports are suitable for keyboards, mice, and other low-bandwidth peripherals. The SD/TF card slots allow for quick access to data from memory cards.
6. Troubleshooting
If you encounter issues, please refer to the following common troubleshooting steps:
- No Display Output:
- Ensure the USB-C cable is securely connected to both the docking station and your laptop.
- Verify that your laptop's USB-C port supports DisplayPort Alternate Mode.
- Check that monitor cables are correctly connected and monitors are powered on and set to the correct input source.
- Try updating your laptop's graphics drivers.
- Restart your laptop and reconnect the docking station.
- No Power Delivery to Laptop:
- Ensure your USB-C power adapter is connected to the PD input port on the docking station and is functional.
- Verify your laptop's USB-C port supports Power Delivery.
- Check the power rating of your adapter; it should be sufficient for your laptop's charging requirements (up to 100W supported by the dock).
- USB Devices Not Working:
- Reconnect the USB device to a different port on the docking station.
- Ensure the device is properly powered, if applicable.
- Try connecting the USB device directly to your laptop to rule out device issues.
- Ethernet Connection Issues:
- Check the Ethernet cable connection to both the docking station and your router/modem.
- Verify network settings on your laptop.
- Try connecting your laptop directly to the router/modem to confirm internet functionality.
- Docking Station Feels Warm:
It is normal for the docking station to become warm during operation, especially when multiple high-power devices or displays are connected. Ensure adequate ventilation around the device.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Lemorele |
| Model Number | TC500 |
| Hardware Interface | USB-C, HDMI, DisplayPort, USB-A, RJ45, SD/TF, 3.5mm Audio |
| Video Output | 2x HDMI 2.0 (4K@60Hz), 1x DisplayPort 1.2 (4K@60Hz) |
| Triple Display Support | Yes (DP requires DSC for 4K@30Hz in triple mode) |
| USB Ports | 1x USB-C 3.0, 3x USB-A (mix of 3.0/2.0) |
| Power Delivery | Up to 100W (via USB-C PD input) |
| Ethernet | Gigabit (RJ45) |
| Card Reader | SD, TF (Micro SD) |
| Audio | 3.5mm Audio/Mic Combo Jack |
| Item Weight | 240g |
| Compatible Devices | Laptops with full-featured USB-C ports (Windows, macOS) |
| Cable Length | 1.0m USB-C to USB-C |
8. Maintenance
To ensure the longevity and optimal performance of your docking station:
- Cleaning: Use a soft, dry cloth to clean the exterior of the docking station. Avoid liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the device to strong impacts. Do not attempt to disassemble or repair the unit yourself.
9. Warranty and Support
This Lemorele TC500 USB-C Docking Station comes with a 2 Year Manufacturer Guarantee.
For technical support, warranty claims, or further assistance, please contact Lemorele customer service through the retailer where you purchased the product or visit the official Lemorele website for contact information.
