VINGLI Nightstands with Charging Station (Model FN2DOCS) - Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your VINGLI Nightstands with Charging Station (Model FN2DOCS). Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the nightstand on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may damage the material.
• The maximum weight capacity for the top surface is 100 lbs (45 kg). Each drawer has a maximum weight capacity of 22 lbs (10 kg). Do not exceed these limits.
• Keep children away from small parts during assembly.
• For the charging station, ensure the power cord is fully inserted into a grounded outlet. Do not overload the outlets.
• Avoid exposing the charging station to liquids or excessive moisture.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing, please contact customer support.

• Nightstand Panels (Top, Bottom, Sides, Back)
• Drawer Components (Fronts, Sides, Backs, Bottoms)
• Solid Pine Wood Legs
• Metal Drawer Slides (3-Section Steel Slide)
• Charging Station Unit (with 1 USB, 1 Type-C, 2 AC outlets)
• Hardware Pack (Screws, Dowels, Cams, Bolts, etc.)
• Installation Tool (Allen Key)
• Instruction Manual (this document)

Setup and Assembly Instructions

Assembly is required for this product. Please follow the step-by-step instructions and diagrams provided in the included assembly guide. The following general steps outline the process:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Refer to the parts list in the separate assembly guide to identify each piece.
2. Assemble the Main Frame: Attach the side panels to the bottom panel using the provided hardware (dowels, cams, and screws). Ensure all connections are secure.
3. Install Drawer Slides: Secure the metal drawer slides to the inner side panels of the nightstand frame. Pay attention to the orientation of the slides as indicated in the assembly guide.
4. Assemble Drawers: Construct the two drawers by attaching the side, back, and bottom panels to the fluted drawer fronts. Install the corresponding drawer slide mechanisms onto the drawer sides.
5. Insert Drawers: Carefully slide the assembled drawers into the nightstand frame, aligning the drawer slides. Test for smooth operation.
6. Attach Top Panel: Secure the top panel to the assembled frame using the designated hardware.
7. Install Charging Station: Insert the charging station unit into the pre-cut opening on the top panel. Secure it in place as per the instructions.
8. Attach Legs: Fasten the solid pine wood legs to the bottom of the nightstand.
9. Final Checks: Ensure all screws are tightened, and the nightstand is stable.

Image: Metal Fully Extended Silent Slide. This image illustrates the smooth and quiet operation of the drawer slides, allowing full extension for easy access.

Image: Solid Pine Wood Legs. The sturdy pine wood legs ensure stable and long-lasting support for the nightstand.

Operating Instructions

Using the Charging Station

Your VINGLI Nightstand is equipped with a convenient charging station integrated into the top surface. This station includes:

• 2 AC Outlets (125V/12A)
• 1 USB Port (5V/2A)
• 1 Type-C Port (5V/2A)

To use the charging station:

1. Ensure the nightstand's power cord is securely plugged into a functional wall outlet.
2. Connect your electronic devices (smartphones, tablets, laptops, etc.) to the appropriate USB, Type-C, or AC outlets on the charging station.
3. Verify that your devices begin charging.

Image: Multi-Device Charging. The integrated charging station provides convenient access to power for various electronic devices.

Drawer Operation

The nightstand features two drawers with metal full-extension silent slides. To open, gently pull the handle. To close, push the drawer back until it is fully seated. The soft-close mechanism will engage to prevent slamming.

Maintenance

Cleaning

• Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• For spills, wipe immediately with a dry cloth to prevent staining. The surface is water-resistant but not waterproof.

General Care

• Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Avoid placing hot items directly on the surface without protection.
• Keep the nightstand away from direct sunlight and excessive humidity to prevent warping or fading.

Image: Exhaustive Focus on Details. This image highlights key features such as the smooth drawer slides, durable pine wood feet, a cable management hole, and the easy-to-clean water-resistant surface.

Troubleshooting

Specifications

Image: Product Specification Diagram. This diagram provides a visual representation of the nightstand's dimensions and weight capacities.

Warranty Information

VINGLI provides a 1-Year Quality Warranty for this product. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or encounter any issues with your VINGLI Nightstands, please do not hesitate to contact our customer support team. We are committed to providing prompt and helpful service.

For support, please refer to the contact information provided with your purchase or visit the official VINGLI website.