Bellemave Twin Over Twin Bunk Bed with Storage and Wardrobe

1. Important Safety Information

Please read all instructions carefully before assembly and use of this bunk bed. Keep this manual for future reference.

• Guardrails: Always use the guardrails on the upper bunk to prevent falls. Ensure they are securely attached before use.
• Assembly: Ensure the bed is fully assembled and all fasteners are tightened before allowing anyone to use it. Periodically check and tighten all connections.
• Weight Capacity: The upper bunk has a weight capacity of 350 LBS. The lower bunk has a weight capacity of 450 LBS. The drawers have a weight capacity of 22 LBS each. Do not exceed these limits.
• Mattress Thickness: The recommended mattress thickness for both bunks is 6 inches.
• Children's Safety: The upper bunk is not suitable for children under 6 years of age.
• Ventilation: Ensure adequate ventilation around the bed.
• No Jumping: Do not allow jumping on the bed.
• Ladder Safety: Use the ladder for entry and exit from the upper bunk. Do not use other parts of the bed for climbing.

2. Product Overview

The Bellemave Twin Over Twin Bunk Bed is designed to maximize space with its stacked configuration, integrated wardrobe, and four storage drawers. It features a sturdy wooden frame and safety guardrails for secure use.

Key Features:

• Twin over Twin Bunk Bed design.
• Integrated wardrobe with shelves.
• Four spacious storage drawers.
• Full-length guardrails on the upper bunk.
• Sturdy wooden construction (Pine Wood + Plywood + MDF).
• No box spring required; solid wood slats support mattresses directly.

Product Dimensions:

Figure 2.1: Overall dimensions of the bunk bed, including length, width, and height of each section, and drawer measurements.

• Overall Dimensions: 92.9"L x 55.5"W x 63"H
• Upper Bed Dimensions: 90"L x 39.2"W
• Lower Bed Dimensions: 88.8"L x 39.2"W
• Wardrobe Dimensions: Approximately 11.8"W x 55.5"D x 63"H (based on image)
• Drawer Dimensions: Approximately 21"L x 9.9"W x 11.4"H (based on image)

Figure 2.2: A lifestyle image showing the bunk bed in a room setting, highlighting its integrated storage features.

3. Components List

Before beginning assembly, ensure all parts and hardware are present and undamaged. Refer to the included installation manual for a detailed list of components and hardware. All necessary tools for assembly are included.

The product is shipped in 4 packages. Please ensure all packages have arrived before starting assembly.

4. Setup and Assembly

Assembly is required for this bunk bed. Follow the step-by-step instructions provided in the separate installation manual included with your purchase. It is recommended to have two adults for assembly.

Assembly Tips:

• Clear a spacious area for assembly.
• Lay out all components and hardware according to the manual.
• Do not fully tighten screws until all parts are loosely assembled to allow for adjustments.
• Ensure all safety guardrails are correctly installed and secured.

Mattress Information:

This bunk bed does not require a box spring. Mattresses are supported directly by the included wooden slats.

Figure 4.1: Illustration of compatible mattress sizes for the upper and lower bunks. The upper bunk accommodates Twin or Twin XL mattresses, while the lower bunk accommodates Twin or Full size mattresses.

• Upper Bunk: Compatible with Twin (39"x75") or Twin XL (39"x80") mattresses.
• Lower Bunk: Compatible with Twin (39"x75") or Full (54"x75") mattresses.
• Recommended Mattress Thickness: 6 inches for both bunks.

Figure 4.2: Close-up view highlighting the full-length guardrails on the upper bunk and the sturdy wooden construction of the bed frame.

5. Operating Instructions

Using the Wardrobe:

The built-in wardrobe features a sliding door for easy access. It includes internal shelves and a hanging rod for organizing clothes, toys, and other items.

Figure 5.1: Image illustrating the built-in wardrobe and the four storage drawers, demonstrating their use for organizing various items.

Figure 5.2: A detailed view of the wardrobe interior, showing the hanging rod and adjustable shelves for storage.

Using the Storage Drawers:

The four drawers located beneath the lower bunk provide additional storage. Pull the handles to open and push to close. Ensure drawers are fully closed when not in use to prevent tripping hazards.

Figure 5.3: Close-up view of the four storage drawers, demonstrating their capacity for storing various items.

6. Maintenance

Cleaning:

• Wipe the bed frame with a soft, damp cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
• Promptly clean up any spills to prevent staining.

Care:

• Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• Avoid dragging the bed when moving it; lift it to prevent damage to the frame and floor.
• Keep the bed away from direct sunlight and extreme temperature changes to prevent warping or fading.

7. Troubleshooting

• Bed feels wobbly: Check all bolts and screws. Tighten any loose connections. Ensure the bed is on a level surface.
• Drawers do not slide smoothly: Check for any obstructions in the drawer glides. Ensure the drawers are correctly aligned on their tracks.
• Squeaking noises: Identify the source of the squeak. Often, tightening bolts in that area can resolve the issue. Applying a small amount of furniture wax or silicone spray to joints can also help.
• Missing parts: If you find any parts missing during assembly, refer to the contact information in the Warranty and Support section.

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or any questions regarding your Bellemave Twin Over Twin Bunk Bed, please contact the manufacturer or your retailer directly. Keep your purchase receipt and model number (YZQ473BT) handy for faster service.

You can visit the Bellemave store for more information: Bellemave Store