roborock Saros 10 Robot Vacuum and Mop Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your roborock Saros 10 Robot Vacuum and Mop. Please read this manual thoroughly before using the product and retain it for future reference.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This includes:

• Read all instructions before use.
• Do not allow children to operate the robot.
• Ensure the power cord is not damaged.
• Do not use the robot in wet environments or near water.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Only use as described in this manual.

3. Package Contents

Verify that all items are present in the package:

• Disposable Dust Bag (1)
• Dock (Disposable Dust pre-installed) (1)
• Dock Base (1)
• Robot Vacuum (1)
• Instruction Guide (1)
• Power Cord (1)

4. Product Overview

The roborock Saros 10 is an advanced robot vacuum and mop designed for comprehensive home cleaning. Key features include:

• Ultra-Thin Design: A sleek 3.14-inch profile with a retractable LDS (Laser Distance Sensor) and RGB camera for optimal dirt detection and navigation in low-clearance areas.
• Powerful Suction & Zero Tangling: 22,000Pa suction with a TUV SGS dual-certified tangle-free main brush, ensuring efficient debris pickup and hair removal.
• Hot Water Sonic Vibration Mopping: VibraRise 4.0 system delivers up to 4000 vibrations/min with hot water for superior stain removal. Features a retractable anti-tangling side brush and lifting anti-tangling side mop for edge-to-edge coverage.
• Reactive AI 3.0 Obstacle Recognition: Advanced perception system with front triple structured light, RGB camera, and VertiBeam lateral structured light for precise obstacle detection and real-time responses.
• New Generation RockDock Ultra: An advanced docking station with 176°F hot water mop washing, dynamic temperature settings, 140°F heated air drying, self-cleaning, intelligent dirt detection, auto detergent dispenser, self-refilling, fast charging, and off-peak charging.
• Smart Voice Assistant Integration: Control your robot with voice commands via "Hello Rocky," Alexa, Siri, and Google Home.
• Pet-Friendly Features: Includes Pet Snaps and Video Call & Cruise for monitoring pets, powerful suction for pet hair, and smart cleaning algorithms for high-traffic pet areas.
• Privacy Assurance: Features capturing sensitive data are off by default and require consent. Photos and videos are not stored on Roborock's cloud servers. TUV Rheinland certified and complies with ETSI EEN 303 645 data security standard.

Figure 1: roborock Saros 10 Robot Vacuum and Mop with its RockDock Ultra.

Figure 2: The 3.14-inch ultra-thin design allows the robot to clean under low-clearance furniture.

Figure 3: Reactive AI 3.0 Obstacle Recognition system for intelligent navigation.

Play video

Video 1: An official product video showcasing the roborock Saros 10's features and design details.

5. Setup

5.1 Initial Setup

1. Unpack all components from the box.
2. Place the RockDock Ultra in a suitable location with access to a power outlet and sufficient space for the robot to maneuver.
3. Connect the power cord to the dock and plug it into a wall outlet.
4. Ensure the robot is properly docked and charging.
5. Download the roborock app from your device's app store.
6. Follow the in-app instructions to connect your Saros 10 to your home's 2.4GHz WiFi network.

5.2 Creating a Map

To enable advanced cleaning features, the robot needs to map your home environment. This can be done via the roborock app:

1. Open the roborock app and select your Saros 10.
2. Navigate to the 'Manage Maps' section in the settings.
3. Select 'Quick Mapping' or 'Create New Map'.
4. Ensure all doors to rooms you wish to map are open and clear any debris or wires to prevent jamming.
5. The robot will then navigate your home to create a detailed map.

6. Operating Instructions

6.1 Basic Operation

Once the map is created, you can initiate cleaning cycles through the app or voice commands.

• Start/Pause: Press the power button on the robot or use the app to start or pause a cleaning cycle.
• Return to Dock: Press the dock button on the robot or use the app to send the robot back to its RockDock Ultra.

6.2 App Control (roborock App)

The roborock app offers extensive control over your Saros 10:

• SmartPlan 2.0: Intelligently identifies floor types and room categories, customizing optimal cleaning strategies based on area and past habits.
• Custom Cleaning: Select specific rooms, zones, or set routines for cleaning.
• No-Go Zones & Invisible Walls: Define areas the robot should avoid.
• Cleaning Intensity: Adjust suction power, scrub intensity, and water flow for different cleaning needs.
• Multi-Level Mapping: Supports up to 4 maps for multi-level homes.
• Pet Snaps & Video Call & Cruise: Monitor your pets remotely with snapshots and two-way audio/video.

Figure 4: Overview of the roborock app interface for controlling the Saros 10.

Play video

Video 3: Detailed guide on map settings and customization options within the roborock app.

Play video

Video 4: Demonstration of the roborock Saros 10's video monitoring capabilities.

6.3 Voice Control

Activate your robot using voice commands:

• Say "Hello Rocky" to activate the robot's built-in voice assistant.
• Integrate with Amazon Alexa, Apple Siri, or Google Home for broader control.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your roborock Saros 10.

7.1 RockDock Ultra Maintenance

• Water Tanks: Regularly empty and clean the dirty water tank. Refill the clean water tank as needed.
• Mop Washing & Drying: The dock automatically washes mops with 176°F hot water and dries them with 140°F heated air. Ensure the washing tray is clear of debris.
• Auto Dust Emptying: The dock automatically empties the robot's dustbin into a disposable dust bag. Replace the dust bag when full.
• Self-Cleaning: The dock features a self-cleaning function with warm water.
• Detergent Dispenser: Ensure the auto detergent dispenser is filled.

7.2 Robot Maintenance

• Main Brush: Check the zero-tangling main brush regularly for any entangled hair or debris and clean as necessary.
• Side Brush: Inspect the retractable side brush for wear or tangles.
• Filters: The robot uses a washable filter. Clean or replace it according to the maintenance schedule.
• Sensors: Wipe the robot's sensors (LDS, RGB camera, VertiBeam) with a soft, dry cloth to ensure accurate navigation and obstacle avoidance.

8. Troubleshooting

If you encounter issues with your roborock Saros 10, refer to the following common solutions:

• Robot not charging: Ensure the dock is powered on and the robot is correctly aligned with the charging contacts. Clean the charging contacts on both the robot and the dock.
• Poor cleaning performance: Check and clean the main brush, side brush, and filters. Ensure water tanks are filled and detergent is sufficient.
• Navigation errors: Clean all sensors on the robot. Ensure the environment is well-lit and free of excessive clutter.
• Robot stuck: Clear any obstacles around the robot. Check for entangled wires or small objects.
• App connectivity issues: Ensure your phone and robot are connected to a 2.4GHz WiFi network. Restart the app and the robot.
• Factory Reset: If persistent issues occur, a factory reset may resolve them.

9. Specifications

10. Warranty and Support

For warranty information, please refer to the documentation included in your package or visit the official roborock website. For technical support or service inquiries, please contact roborock customer service.

Optional protection plans are available for purchase:

• 2-Year Protection Plan
• 3-Year Protection Plan
• Complete Protect (monthly subscription)