1. Introduction
Thank you for choosing the LUE BONA 26-inch Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
These counter height bar stools are designed with a 360° swivel function, comfortable upholstered seating, and sturdy metal legs, suitable for kitchen islands, home offices, cafe counters, or dining areas.
Image 1.1: Front view of the LUE BONA 26-inch Swivel Bar Stool.
2. Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the stools on a soft, clean surface to prevent scratches.
- Tighten all screws and bolts securely. Periodically check and re-tighten fasteners to maintain stability.
- Do not stand on the stool. Use only for sitting.
- Maximum weight capacity: 330 lbs (150 kg). Do not exceed this limit.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Avoid placing the stools near heat sources or in direct sunlight for prolonged periods to prevent material degradation.
3. Package Contents
Each LUE BONA 26-inch Swivel Bar Stool package typically includes the following components. If you purchased a set of 3, you will receive three of each item listed below.
- Seat with Backrest and Armrests (1)
- Leg Frame Assembly (1)
- Swivel Plate (pre-attached to seat or separate) (1)
- Footrest Bar (1)
- Hardware Pack (screws, washers, Allen wrench) (1)
- Instruction Manual (1)
4. Setup and Assembly
Assembly is straightforward and typically takes 10-15 minutes per stool. Follow these steps carefully.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, flat surface to prevent damage. Verify all components are present against the package contents list.
- Attach Swivel Plate (if separate): If the swivel plate is not pre-attached to the seat, align it with the pre-drilled holes on the underside of the seat and secure it using the provided screws. Ensure it is centered and tightened.
- Assemble Leg Frame: Connect the leg frame components if they are not pre-assembled. Ensure the footrest bar is correctly positioned and secured within the leg frame using the provided hardware.
- Attach Seat to Leg Frame: Carefully align the swivel plate (attached to the seat) with the top of the leg frame. Secure the seat to the leg frame using the remaining screws and washers. Tighten all fasteners evenly.
- Final Tightening: Once all parts are assembled, gently place the stool upright. Apply slight pressure to the seat and re-tighten all screws and bolts to ensure maximum stability.
Video 4.1: Official LUE BONA assembly guide for swivel bar stools. This video demonstrates the assembly process, highlighting key steps for secure setup.
5. Operating Instructions
5.1. 360° Swivel Function
The bar stools feature a smooth 360° swivel mechanism. To use, simply sit on the stool and rotate in any direction. This allows for easy conversation and movement without needing to reposition the entire stool.
Image 5.1: Illustration of the 360° swivel, thickened cushion, sturdy metal footrest, and adjustable balance feet.
5.2. Ergonomic Design Features
- Contoured Backrest: The semi-enveloping design provides proper lumbar support and a secure, comfortable feeling.
- Integrated Armrests: Open side armrests offer a comfortable pivot point for elbow and shoulder relaxation.
- Thickened Cushion: The 4-inch thick, high-density foam cushion ensures lasting comfort for extended sitting.
- Sturdy Metal Footrest: The integrated footrest provides additional leg support and enhances overall stability.
Image 5.2: Detailed view of the contoured backrest, integrated armrests, and thickened cushion for enhanced comfort.
5.3. Adjustable Leveling Feet
The stools are equipped with adjustable leveling feet. If the stool wobbles on an uneven floor, gently turn the feet at the bottom of the legs until the stool is stable and level.
Image 5.3: Dimensions and recommended counter heights for standard and storage modes.
6. Maintenance
6.1. Cleaning
- Faux Leather Upholstery: Wipe clean with a soft, damp cloth. For tougher stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals.
- Metal Legs: Wipe with a soft, dry cloth. Avoid using abrasive cleaners that could scratch the finish.
6.2. General Care
- Periodically check all screws and bolts and re-tighten them to ensure the stool remains stable and secure.
- Avoid exposing the stools to extreme temperatures or humidity.
- Do not drag the stools across the floor; lift them to move to prevent damage to the legs and floor.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles | Uneven floor; loose fasteners | Adjust the leveling feet at the bottom of the legs. Check and re-tighten all assembly screws. |
| Swivel mechanism is stiff | Lack of lubrication; debris in mechanism | Apply a small amount of silicone-based lubricant to the swivel plate. Ensure no debris is obstructing the mechanism. |
| Screws loosen over time | Normal wear and tear | Periodically check and re-tighten all screws and bolts to maintain stability. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 22"D x 20"W x 37"H |
| Seat Height | 26"H (fits 36-38"H kitchen island) |
| Color | Black |
| Frame Material | Metal |
| Seat Material Type | Faux Leather |
| Weight Capacity | 330 lbs |
| Number of Pieces | 3 (for this specific set) |
| Additional Features | Armrest, 360° Swivel, Adjustable Leveling Feet |
9. Warranty and Support
LUE BONA products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product issues, please contact LUE BONA customer support. Refer to your purchase documentation for specific warranty details and contact information.
Typically, customer support can be reached via the retailer where the product was purchased or through the official LUE BONA website.
