Important Safety Instructions
Please read and understand all instructions before assembling and using this product. Keep this manual for future reference.
- Do not exceed the maximum weight capacity of the tabletop (100 lbs) or drawers (11 lbs per drawer).
- Ensure all connections for the charging station are secure and properly grounded. Do not overload the power strip.
- Keep liquids away from the charging station and electrical components.
- Place the table on a flat, stable surface to prevent tipping.
- Keep small parts and packaging materials away from children.
- Use only the provided hardware for assembly.
Package Contents
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Nightstand units
- 2 x Charging Stations (pre-installed or separate)
- 2 x LED Light Strips
- 2 x Hardware Kits (screws, dowels, cam locks, etc.)
- 2 x Instruction Manuals
Image: Overview of the RALGEND Farmhouse End Table with key dimensions and weight capacities for the tabletop, open compartment, and drawers.
Assembly Instructions
Assembly is required. Please follow the detailed step-by-step instructions provided in the included instruction manual and use the hardware kit. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Identify each part using the diagrams in the separate assembly guide.
- Assemble Frame: Connect the side panels to the top and bottom panels using the provided screws and dowels. Ensure all connections are tight and secure.
- Install Drawers: Assemble the drawer boxes according to the instructions. Install the drawer slides onto the table frame and the drawer boxes. Insert the assembled drawers into the frame.
- Attach Handles: Secure the metal handles to the drawer fronts using the provided screws.
- Install Charging Station: The charging station is typically pre-installed in the tabletop. Ensure its power cord is routed through the designated cable management hole at the back.
- Apply LED Light Strip: Adhere the LED light strip to the underside of the open compartment shelf. Connect it to the power source as instructed.
Image: Detailed view of construction elements including metal handles, sturdy base, smooth-sliding drawer rails, and thickened panels, highlighting the quality of components.
Operating Instructions
A. Charging Station
The end table features a built-in power strip for convenient device charging.
- Power Connection: Plug the 4.9-foot power cord from the charging station into a standard 120V AC wall outlet.
- AC Outlets: Use the two 120V 12A AC outlets to power devices such as lamps, laptops, or other small appliances.
- USB Ports: Use the two 5V 2A USB ports to charge smartphones, tablets, and other USB-powered devices.
- Cable Management: Route device charging cables through the cable management hole at the back of the table to maintain a tidy appearance.
Image: The integrated power strip on the tabletop, illustrating the 2 AC outlets and 2 USB ports in use for charging multiple devices.
B. LED Light Strip
The adjustable LED light strip provides customizable ambient lighting for the open compartment.
- Power On/Off: Use the included remote control or mobile app to turn the LED lights on or off.
- Color Selection: Choose from multiple colors to match your mood or room decor.
- Brightness Adjustment: Adjust the brightness levels to create a soft night light or brighter ambient lighting.
- Music Sync Mode: Activate the music sync function via the remote or app to make the lights react to sound.
- Timer Function: Set a timer for the lights to automatically turn off after a specified duration.
Image: The LED light strip illuminating the open compartment, with visual cues for its various features and control options (APP Control, Remote Control).
Maintenance
Proper care will ensure the longevity and appearance of your RALGEND End Table.
- Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
- Dusting: Regularly dust the table with a dry, soft cloth.
- Electrical Components: Ensure the charging station and LED lights remain dry. Do not attempt to clean electrical components with liquids.
- Hardware: Periodically check and tighten all assembly hardware to maintain stability.
Troubleshooting
If you encounter issues, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging station not working | Power cord unplugged; Wall outlet not active; Device cable faulty; Overload. | Ensure power cord is fully plugged into a working outlet. Test the outlet with another device. Try a different charging cable. Unplug some devices if overloaded. |
| LED lights not turning on | LED strip unplugged; Remote battery dead; App connection issue. | Check the LED strip's power connection. Replace remote battery. Re-pair the app with the LED controller. |
| Drawers stick or do not slide smoothly | Improper assembly; Obstruction in slides; Loose hardware. | Review assembly steps for drawer slides. Check for any objects blocking the slides. Tighten all drawer hardware. |
| Table is wobbly | Uneven floor; Loose hardware. | Ensure the table is on a level surface. Check and tighten all assembly screws. |
Specifications
| Feature | Detail |
|---|---|
| Brand | RALGEND |
| Model Number | 6101BZUDP2BKUS |
| Product Dimensions | 17.7"D x 17.7"W x 23.6"H (45cm D x 45cm W x 60cm H) |
| Item Weight | 78 Pounds (for the set of 2) |
| Frame Material | Engineered Wood (Particleboard) |
| Color | Black |
| Number of Drawers | 2 per unit |
| Charging Station | 2 AC Outlets (120V 12A), 2 USB Ports (5V 2A) |
| Power Cord Length | 4.9 feet |
| LED Light Strip | Adjustable color and brightness, music sync, timer function, app/remote control. |
| Assembly Required | Yes |
Warranty and Support
RALGEND products are designed for quality and durability. For any questions regarding assembly, missing parts, or product functionality, please contact RALGEND customer support. Refer to your purchase documentation for specific warranty details.
You can typically find support contact information on the RALGEND official website or through the retailer where the product was purchased.