Scatach Cocy-011

Scatach 6000A Car Battery Jump Starter Instruction Manual

Model: Cocy-011

Introduction

The Scatach 6000A Car Battery Jump Starter is a portable and powerful device designed to safely start 12V vehicles with engines up to 9.0L gasoline and 7.0L diesel. It also functions as a portable power bank and features a multi-mode LED flashlight. This manual provides essential information for the safe and effective use and maintenance of your jump starter.

Scatach 6000A Car Battery Jump Starter with jumper cables connected to a car battery

Image: The Scatach 6000A Jump Starter connected to a car battery, showcasing its compact design and included jumper cables.

Product Overview

Key Features:

  • Powerful Jump Starting: 6000A peak current, capable of up to 50 jump starts on a single charge for 12V vehicles (up to 9.0L gasoline / 7.0L diesel engines).
  • Portable Design: Compact and easy to carry, similar in size to a standard power bank.
  • Multiple Safety Features: Includes spark-proof, reverse polarity protection, low-temperature protection, high-temperature protection, and over-load protection.
  • Emergency Power Bank: Provides emergency charging for mobile devices via USB interface.
  • 3-Mode LED Flashlight: Features flash, strobe, and SOS light modes for outdoor emergencies.
  • Built-in Compass: For navigation assistance.

Package Contents:

  • Scatach Jump Starter (x1)
  • Smart Jumper Cable (x1)
  • USB Type-C Charging Cable (x1)
  • User Manual (x1)
  • Storage Case (x1)

Safety Information

Read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire, or serious injury.

  • Do not throw or put the device in fire or hot water.
  • Do not disassemble or reassemble the product.
  • Do not expose to high temperatures.
  • Keep out of reach of children.
  • Do not connect the battery terminals together or to the same piece of metal.
  • Ensure the jump starter has at least 50% charge before attempting to jump start a vehicle.
  • Always connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal.
  • Do not crank the engine for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before attempting again.
Scatach 6000A Car Battery Jump Starter displaying 10 safety protections icons

Image: Visual representation of the 10 safety protections integrated into the Scatach Jump Starter, including reverse connection, over discharge, over current, short circuit, reverse charge, over temperature, low voltage, reverse polarity, over charge, and low temperature protection.

Setup

Charging the Jump Starter:

  1. Connect the provided USB Type-C charging cable to the jump starter's input port.
  2. Connect the other end of the cable to a suitable USB power adapter (not included) or a USB port.
  3. The LED display will show the charging progress. Ensure the unit is fully charged before first use and regularly thereafter.

Preparing for Use:

  • Ensure the jump starter is sufficiently charged (above 50% is recommended for optimal performance).
  • Locate your vehicle's battery and identify the positive (+) and negative (-) terminals.

Operating Instructions

Jump Starting a Vehicle:

  1. Step 1: Ensure the jump starter has sufficient power. Plug the smart jumper cable into the 12V vehicle start port on the jump starter.
  2. Step 2: Connect the red clamp to the vehicle battery's positive (+) terminal and the black clamp to the vehicle's negative (-) terminal. The indicator on the smart jumper cable should turn green.
  3. Step 3: Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
  4. Step 4: Once the vehicle starts, immediately remove the smart jumper cable from the jump starter, then disconnect the clamps from the vehicle battery (black first, then red).
Four-step visual guide on how to use the Scatach 6000A Car Battery Jump Starter. Step 1: Plug in jumper cables. Step 2: Connect red to positive, black to negative. Step 3: Start vehicle. Step 4: Remove jumper.

Image: A step-by-step visual guide demonstrating the process of jump starting a car using the Scatach 6000A Jump Starter.

Using as a Portable Power Bank:

The jump starter features USB output ports (USB 5V/2.1A and USB 5V/3A) to charge mobile devices such as cell phones, tablets, and cameras.

  1. Connect your device's charging cable to one of the USB output ports on the jump starter.
  2. The jump starter will automatically begin charging your device.
Scatach 6000A Car Battery Jump Starter being used to charge various electronic devices like headphones, camera, smart watch, laptop, cell phone, and tablet.

Image: The Scatach 6000A Jump Starter acting as a portable power bank, charging multiple electronic devices simultaneously.

Using the LED Flashlight:

The integrated LED flashlight has three modes for various situations:

  • Illumination: Long press the power button to turn on the flashlight.
  • SOS Mode: Short press the power button once to switch to SOS mode.
  • Strobe Mode: Short press the power button again to switch to strobe mode.
  • To turn off the flashlight, short press the power button until it cycles off, or long press the power button.
Scatach 6000A Car Battery Jump Starter with its 3-in-1 LED flashlight illuminated, showing icons for flashlight, SOS, and strobe modes.

Image: The Scatach 6000A Jump Starter's LED flashlight in action, illustrating its three distinct lighting modes for emergency use.

Official Product Video:

Video: A demonstration of the Scatach Jump Starter, showcasing its features including the flashlight and jumper cables. This video is provided by the seller, manhuipower.

Maintenance

  • Recharging: Recharge the jump starter after each use. If not used frequently, charge it every 3-6 months to maintain battery health.
  • Storage: Store the device in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.

Troubleshooting

  • Device not turning on: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
  • Vehicle not starting:
    • Check if the smart jumper cable indicator is green. If not, recheck connections to the battery terminals.
    • Ensure the jump starter has sufficient charge (above 50%).
    • Do not crank for too long. Allow the starter to cool down between attempts.
    • Verify that the vehicle's battery terminals are clean and free of corrosion.
  • Device not charging: Try a different USB charging cable or power adapter. Ensure the charging cable is securely connected.

Specifications

FeatureDetail
BrandScatach
Model NumberCocy-011
Peak Amperage6000 Amps
Engine CompatibilityUp to 9.0L Gasoline, 7.0L Diesel
Battery Voltage12V
Battery Cell CompositionLithium Polymer
Battery Capacity18000 Milliamp Hours
Product Dimensions1.1"D x 3"W x 6"H
Item Weight1.32 pounds
USB Output5V/2.1A, 5V/3A

Warranty and Support

Your Scatach Jump Starter comes with 2-years technical support. For any assistance, questions, or concerns regarding your product, please contact Scatach customer support. Refer to the contact information provided in the packaging or on the official Scatach website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.