VINGLI Outdoor Bar Stools Set of 2 - Instruction Manual

Product Overview

This manual provides instructions for the assembly, use, and maintenance of your VINGLI Outdoor Bar Stools Set. These bar stools are designed for versatile use in various settings, including kitchen islands, home bars, patios, and gardens.

The set features a sturdy A-frame structure crafted from solid cedar wood, designed for durability and stability. The ergonomic saddle-shaped seat and integrated footrest are designed for comfort during extended use.

Image: Two VINGLI brown cedar wood bar stools and a matching bar table on a sunny outdoor balcony overlooking a scenic landscape. This illustrates the typical outdoor setting for the bar stools.

Safety Information

Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Ensure all bolts and screws are securely tightened before use.
• Do not exceed the maximum weight capacity of 400 pounds per stool.
• Keep children away from the assembly area. Small parts may pose a choking hazard.
• Use on a flat, stable surface to prevent tipping.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• 2 x Bar Stools
• Hardware Pack (bolts, washers, nuts, Allen wrench)
• Instruction Manual (this document)

Setup and Assembly

Assembly is required for this product. It is recommended to assemble the stools on a soft, clean surface to prevent scratches.

Tools Required:

• Included Allen Wrench
• Phillips Head Screwdriver (PH3 tip recommended for proper tightening)

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
2. Attach Side Rails: Connect the side rails to the stool legs using the provided bolts and washers. Do not fully tighten yet.
3. Attach Footrests: Secure the footrest bars between the legs. Ensure they are properly aligned.
4. Attach Seat: Place the saddle-shaped seat onto the assembled frame. Align the pre-drilled holes.
5. Secure All Fasteners: Once all components are loosely assembled, gradually tighten all bolts and screws using the Allen wrench and Phillips head screwdriver. Ensure all connections are firm and stable. Important: Use a PH3 Phillips tip for optimal tightening to prevent stripping.
6. Final Check: Gently shake the stool to ensure stability. If any wobbling occurs, re-check all connections and tighten as necessary.

Image: A woman sitting comfortably on a VINGLI bar stool, with insets highlighting the oversized ergonomic seat and stable frame. This demonstrates the assembled product and its comfort features.

Operating Instructions

The VINGLI bar stools are designed for seating purposes. Follow these guidelines for proper use:

• Always sit centrally on the seat to distribute weight evenly.
• Use the integrated footrest for comfort and stability.
• Do not stand on the stool or use it as a ladder.
• Avoid sudden movements or excessive force that could compromise stability.

Maintenance and Care

Proper maintenance will extend the life and appearance of your bar stools.

• Cleaning: Wipe with a dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Outdoor Use: While designed to withstand various seasons, prolonged exposure to extreme weather conditions (heavy rain, direct scorching sun, snow) may affect the wood finish over time. Consider covering the stools or storing them indoors during harsh weather to preserve their condition.
• Fastener Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability.

Image: A VINGLI bar stool shown in a split image, illustrating its UV-resistant and waterproof properties for all seasons. This highlights the product's durability in outdoor environments.

Troubleshooting

If you encounter any issues with your VINGLI bar stools, refer to the following common solutions:

• Stool Wobbles:
  • Ensure all assembly bolts are fully and evenly tightened.
  • Verify that the stool is placed on a flat, level surface.
• Difficulty Tightening Screws:
  • Confirm you are using the correct screwdriver tip (PH3 Phillips recommended).
  • Do not overtighten, as this can strip the screws or damage the wood.
• Missing Parts:
  • Carefully check all packaging materials.
  • Contact VINGLI customer support for assistance.

Specifications

Image: A VINGLI bar stool with detailed dimensions labeled: 28.74 inches height, 13.78 inches depth, 16.93 inches width, and 9.06 inches footrest height. The image also indicates a weight capacity of up to 400 lbs.

Warranty and Support

Specific warranty information was not provided in the product data. For details regarding warranty coverage or to contact customer support for assistance with missing parts, assembly issues, or product inquiries, please refer to the retailer's website or the VINGLI brand store.

You can visit the VINGLI Store at: VINGLI Official Store