ESSEBAGNO Envol Mechanical Built-in Shower Column

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your ESSEBAGNO Envol Mechanical Built-in Shower Column. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your product.

Image 1.1: ESSEBAGNO Envol Mechanical Built-in Shower Column in a bathroom setting, showcasing the shower head, hand shower, and control panel.

2. Safety Information

Always observe the following safety precautions to reduce the risk of injury or property damage:

• Professional Installation Recommended: Due to the built-in nature of this product, professional plumbing installation is highly recommended.
• Water Supply Shut-off: Always turn off the main water supply before attempting any installation, maintenance, or repair work.
• Water Temperature: Ensure the water heater is set to a safe temperature to prevent scalding.
• Tools: Use appropriate tools for installation and maintenance. Avoid using excessive force that could damage the product.
• Chemicals: Do not use harsh chemicals or abrasive cleaners on the product, as this can damage the finish. Refer to the Maintenance section for cleaning guidelines.

3. Package Contents

Verify that all components are present before beginning installation:

• Built-in shower column with mechanical mixer
• Extra-flat stainless steel shower head
• Metal hand shower (1 jet, square)
• PVC hose (150 cm)
• Built-in housing
• Installation manual

4. Specifications

• Model Number: 9026178
• Brand: ESSEBAGNO
• Color: Chrome
• Material: Brass (faucet body), Metal (hand shower, handle)
• Finish Type: Brushed
• Installation Type: Wall-mounted, Built-in
• Number of Handles: 1
• Shower Head: Extra-flat stainless steel, anti-limescale nozzles, single rain jet
• Hand Shower: 1 jet, square, max flow 9L/min
• Cartridge: 35mm ceramic disc with flow limiter
• Center Distance: Double outlet 150mm
• Hose: PVC 150cm
• Built-in Housing: Included
• Compatibility: Compatible with all types of boilers
• Dimensions (Total): Height: 250mm, Water outlet/body axis width: 375mm
• Hand Shower Dimensions: Height: 210mm
• Built-in Housing Dimensions: Length: 330mm, Width: 100mm
• Tube Diameter: 22mm
• Certifications: ACS (Sanitary Conformity Accreditation)

Image 4.1: Technical drawing illustrating the dimensions and connections of the shower column components.

5. Setup and Installation

Follow these steps for proper installation. It is highly recommended to have this product installed by a qualified professional plumber.

1. Prepare Plumbing: Before assembly, thoroughly flush both hot and cold water pipes. This prevents dirt and debris from entering and potentially compromising the proper functioning of the faucet.
2. Shut Off Water Supply: Close the main water supply valve to your property.
3. Remove Old Fixture (if applicable): If replacing an existing fixture, carefully remove the old faucet.
4. Clean Pipe Threads: Carefully clean the threading of the main water supply pipes to ensure a secure and leak-free connection.
5. Install Built-in Housing: Position and secure the included built-in housing within the wall according to plumbing codes and the technical drawing (Image 4.1). Ensure it is level and at the correct depth for the finished wall surface.
6. Connect Water Lines: Connect the hot and cold water supply lines to the appropriate inlets on the built-in housing. Ensure all connections are tight and sealed.
7. Install Faucet Body: Mount the mechanical mixer and control panel onto the built-in housing.
8. Install Shower Head and Hand Shower: Attach the shower head arm and shower head, and connect the hand shower and hose.
9. Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Address any leaks immediately.

6. Operating Instructions

Your ESSEBAGNO Envol shower column is designed for intuitive use:

• Water Flow and Temperature Control: The mechanical mixer allows you to control both water flow and temperature. Turn the handle to adjust the desired temperature and flow rate.
• Shower Head Function: The main shower head provides a single, consistent rain jet for a relaxing shower experience.
• Hand Shower Function: The hand shower offers a single jet, ideal for targeted rinsing. It has a maximum flow rate of 9L/min, contributing to water saving.
• Diverter: Use the diverter control (part of the mechanical mixer) to switch water flow between the main shower head and the hand shower.

7. Care and Maintenance

Proper care will preserve the finish and functionality of your shower column:

• Regular Cleaning: To keep your shower column clean and prevent limescale deposits (white marks), wipe the faucet and all chrome surfaces with a soft microfiber cloth immediately after each use.
• Recommended Cleaners: For general cleaning, we recommend using mild cleaning agents such as black soap, dish soap, or shower gel diluted with water. Apply with a soft cloth and rinse thoroughly.
• Avoid Harsh Chemicals: NEVER use solvents, metallic sponges, bleach, acids, strong detergents, aggressive chemical cleaning products, or solvent-based cleaning solutions on the product. These can permanently damage the chrome finish and internal components.
• Anti-Limescale Nozzles: The shower head is equipped with anti-limescale nozzles. Periodically rub these rubber nozzles to dislodge any mineral buildup and maintain optimal spray performance.

8. Troubleshooting

If you encounter issues with your shower column, consider the following common solutions:

• Low Water Flow: Check if the main water supply is fully open. Ensure there are no kinks in the hose. Clean the anti-limescale nozzles on the shower head and hand shower. If the issue persists, the cartridge might be obstructed by debris; professional inspection may be required.
• Temperature Fluctuations: Verify that your water heater is functioning correctly. Ensure both hot and cold water lines are properly connected.
• Leaks: If you notice leaks, first ensure all connections are tight. If leaks persist from within the faucet body, the cartridge or seals may need replacement. Contact a professional plumber.
• Dripping Faucet: A dripping faucet often indicates a worn-out cartridge. The cartridge is a wear part and may need replacement after extended use.

For persistent problems, please contact customer support or a qualified plumber.

9. Warranty Information

Your ESSEBAGNO Envol Mechanical Built-in Shower Column comes with the following warranty:

• Faucet Body: Guaranteed for 5 years from the date of purchase.
• Wear Parts: Wear parts such as the diverter, cartridge, and flexible hoses are guaranteed for 2 years from the date of purchase.

This warranty covers manufacturing defects under normal use and service. It does not cover damage resulting from improper installation, misuse, abuse, accident, or unauthorized repairs. Please retain your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require technical assistance, or need to make a warranty claim, please contact your retailer or the ESSEBAGNO customer service department. Please have your model number (9026178) and proof of purchase ready when contacting support.

For more information, visit the official ESSEBAGNO website or consult your local dealer.