KingPavonini 360° Swivel Shower Chair

Important Safety Information

Read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury. Keep this manual for future reference.

• Weight Capacity: Do not exceed the maximum weight limit of 550 lbs (250 kg).
• Stability: Ensure all legs are evenly adjusted and firmly placed on a flat, non-slip surface before use. Verify that the anti-slip rubber feet are intact and clean.
• Swivel Lock: Always engage the 90° swivel lock mechanism when transferring on or off the chair, or when a stationary position is desired.
• Assembly: Ensure all components are securely fastened and locked into place before each use. Do not use the chair if any parts are loose, damaged, or missing.
• Supervision: Individuals with limited mobility, balance issues, or cognitive impairments should be supervised during use.
• Hot Water: Exercise caution with hot water to prevent burns.

Package Contents

Verify that all components are present and undamaged before proceeding with assembly.

• Main Seat Frame with Swivel Mechanism
• 4 Adjustable Legs with Rubber Feet
• Backrest
• 2 Armrests
• EVA Soft Cushion (for seat)
• Assembly Hardware (if applicable, typically pre-installed for tool-free design)

Setup and Assembly Instructions

The KingPavonini Swivel Shower Chair is designed for tool-free assembly. Follow these steps to set up your chair.

1. Attach Legs: Insert each of the four adjustable legs into the designated slots on the underside of the main seat frame. Ensure the spring-loaded pins snap securely into place.
2. Adjust Height: Press the spring-loaded buttons on each leg and slide the inner tube to adjust the chair to your desired height. Ensure all four legs are set to the same height for stability. The chair offers 5 height settings (17"–21" seat height).
3. Install Backrest: Slide the backrest into the rear slots on the seat frame until it clicks securely. The backrest is 2-position adjustable.
4. Attach Armrests: Insert the armrests into the side slots on the seat frame. Ensure they click into place. The armrests are wide-adjustable (21"–23").
5. Place EVA Cushion: Position the soft EVA cushion onto the M-shaped seat for enhanced comfort and anti-slip properties.

Operating Instructions

The KingPavonini Swivel Shower Chair offers versatile functionality for safe and comfortable bathing.

360° Swivel Function

The chair features a 360° swivel seat with a 32-ball bearing system for smooth rotation and a 90° locking mechanism for safety.

1. To Swivel: While seated, lift the lever located under the seat to unlock the swivel mechanism. Gently rotate the seat to the desired position.
2. To Lock: Release the lever to lock the seat securely at any 90° angle. This allows for safe transfers and easy access to all areas during showering without standing.

4-in-1 Design Modes

The chair can be configured in four different modes to suit various needs:

• Shower Stool: Remove both the backrest and armrests for a compact stool.
• Backrest Chair: Attach only the backrest for support without armrests.
• Armchair Stool: Attach only the armrests for side support without a backrest.
• Full Shower Chair: Use with both backrest and armrests for maximum support and comfort.

Video Demonstration: Swivel Function

Video 1: Official KingPavonini demonstration of the swivel shower chair's rotation and locking mechanism.

Maintenance and Care

Proper maintenance ensures the longevity and safe operation of your shower chair.

• Cleaning: Clean the chair regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the materials. Rinse thoroughly and wipe dry after each cleaning.
• Inspection: Periodically inspect all parts for wear, damage, or corrosion. Check that all screws and connections are tight. Pay close attention to the rubber feet for signs of cracking or excessive wear.
• Storage: Store the chair in a dry place when not in use for extended periods.

Troubleshooting

If you encounter issues with your KingPavonini Swivel Shower Chair, refer to the following common solutions:

• Chair Feels Unstable:
  • Ensure all four legs are adjusted to the same height.
  • Verify that the rubber feet are clean and making full contact with the shower floor.
  • Check that all leg and backrest pins are fully engaged.
• Swivel Mechanism Sticking:
  • Ensure the swivel lever is fully lifted when attempting to rotate.
  • Clean any soap residue or debris from around the swivel base.
• Difficulty Adjusting Height/Armrests/Backrest:
  • Ensure the spring-loaded buttons are fully depressed when attempting to adjust.
  • Check for any obstructions or debris in the adjustment holes.

If problems persist, contact customer support.

Specifications

Warranty and Support

KingPavonini products are designed for quality and durability. For any questions, concerns, or assistance with your shower chair, please contact KingPavonini customer support. Refer to your purchase documentation for specific warranty details.

KingPavonini is committed to providing responsive after-sales support for long-term peace of mind.