Garvee Drafting Table with Stool Instruction Manual

Introduction

Thank you for purchasing the Garvee Drafting Table with Stool. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new workstation. Please read this manual thoroughly before assembly and use, and retain it for future reference.

Safety Information

• Ensure all parts are present and undamaged before assembly.
• Assemble on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly.
• Keep children and pets away during assembly.
• Do not exceed the weight capacity of the table.
• Always adjust the tabletop angle and height carefully to avoid injury.

Package Contents

Verify that all components listed below are included in your package:

• Drafting Table Frame
• Glass Tabletop
• Stool
• Retractable Side Table
• Pencil Ledge
• Storage Drawers (2)
• Hardware Kit (screws, bolts, tools)
• Assembly Instructions

Setup and Assembly

Assembly is required for this product. Please follow the included graphical instructions carefully. It is recommended to have two people for certain steps, especially when handling the glass tabletop.

Step 1: Assemble the Main Frame

Begin by assembling the main steel frame of the drafting table. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.

Step 2: Attach the Glass Tabletop

Carefully place the glass tabletop onto the designated mounts on the frame. Align the holes and secure with the provided hardware. Note: Some users have reported minor alignment issues; if holes do not perfectly align, gently adjust the frame or mounts as needed. Do not force components.

Image: Fully assembled Garvee Drafting Table with Stool.

Step 3: Install Storage Components

Attach the retractable side table, pencil ledge, and storage drawers to the main frame as indicated in the assembly guide. These components are designed for easy integration.

Image: Overview of the drafting table highlighting its storage features.

Step 4: Assemble the Stool

Assemble the stool using the provided steel legs and seat. Ensure all connections are tight for stability.

Operating Instructions

Adjusting Tabletop Angle

The tabletop can be tilted from 0 to 75 degrees. To adjust, locate the angle adjustment mechanism (often a lever or knob) beneath the tabletop. Loosen it, set the desired angle, and then tighten to secure. The automatic rotation feature allows for one-handed operation.

Image: Detail of the angle adjustment mechanism and protective feet.

Adjusting Table Height

The table height is adjustable from 31.5" to 49.5". To change the height, locate the height adjustment knobs on the legs. Loosen them, raise or lower the tabletop to your preferred height, and then securely tighten the knobs.

Image: The drafting table configured for both flat and tilted use.

Using Storage Features

• Retractable Side Table: Pull out the side table for additional workspace or to hold accessories. Push it back in when not needed.
• Pencil Ledge: The 24-inch slide-up pencil ledge can be raised to prevent items from rolling off the tilted surface.
• Storage Drawers: Utilize the two nonwoven drawers for storing art supplies, documents, or other items.
• Stationery Organizer: The integrated organizer on the side provides dedicated slots for pens, pencils, and small tools.

Image: Detailed view of the stationery organizer, drawers, and open shelf.

Product Features Demonstration Video

Maintenance and Care

• Cleaning the Glass Top: Use a soft cloth and a mild glass cleaner or water to clean the tempered glass surface. Avoid abrasive cleaners or tools that could scratch the glass.
• Cleaning the Frame: Wipe the powder-coated steel frame with a damp cloth. Dry immediately to prevent rust.
• General Care: Regularly check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.
• Protective Feet: The anti-vibration feet help prevent scratches on your floor and keep the desk stable on uneven surfaces. Ensure they are clean and intact.

Troubleshooting

Table Wobbles or is Unstable

• Ensure all assembly screws and bolts are fully tightened.
• Check that the table is placed on a level surface. Adjust the protective feet if necessary to compensate for uneven floors.

Tabletop Adjustment Issues

• If the tabletop does not tilt smoothly, ensure the adjustment mechanism is clean and free of obstructions.
• Verify that the adjustment knob is properly loosened before attempting to change the angle or height, and tightened afterward.

Missing or Damaged Parts

• If you find any parts missing or damaged upon opening the package, please contact Garvee customer support immediately for assistance. Refer to the "Warranty and Support" section for contact information.

Specifications

Image: Product dimensions overview.

Warranty and Support

Garvee offers a Limited Warranty for this product. For specific warranty details, please refer to the documentation included with your purchase or contact customer support.

We are committed to your satisfaction. If you encounter any issues, have questions, or require assistance with assembly or operation, please contact Garvee customer support:

• Customer Service: Refer to your purchase receipt or the Garvee official website for the most current contact information.
• Return Policy: A hassle-free 7-day return policy is offered. Please check the terms and conditions of your purchase for full details.

For more information, you can visit the Garvee Store on Amazon.