1. Product Overview
The Aqualix IC60 Salt Cell Saltwater Chlorine Generator is designed as a replacement cell compatible with Pentair IntelliChlor IC60 salt cells and EC-521105 / 521105 IntelliChlor power centers. This system is suitable for inground pools up to 60,000 gallons, providing a low-maintenance solution for pool sanitation.
It converts dissolved salt into pure chlorine, resulting in water that is gentler on eyes, skin, and swimsuits compared to traditional chlorine tablets. The unit features upgraded durability with titanium blades and ruthenium coating, an improved flow sensor to minimize false alerts, and a rugged housing resistant to UV, corrosion, and heat.
Clear LED indicators and an easy-to-read display allow for monitoring of salt level, chlorine output, water flow, and system status. When paired with a compatible power center, chlorine output can be fine-tuned with push-button controls.
Image: The Aqualix IC60 Salt Cell, designed for compatibility with Pentair IntelliChlor IC60 systems, shown connected to a pool's plumbing system. An illustration of a power center and control panel is also visible, indicating the required external components.
Image: The Aqualix IC60 Salt Cell positioned in a pool environment, emphasizing its compatibility with Pentair IntelliChlor IC60 EC-521105 systems and its capacity for inground pools up to 60,000 gallons.
Image: A visual comparison highlighting the benefits of the IC60 Salt System over traditional chlorine. The salt system offers gentle comfort and crystal clear water, contrasting with the strong odor and swimwear fading associated with traditional chlorine.
2. Setup and Installation
Installation of the Aqualix IC60 Salt Cell is designed to be straightforward. It utilizes 2-inch union connections and includes a cord for easy integration into most existing pool plumbing systems. No specialized cleaning kit is required for initial setup; standard salt cell cleaning procedures apply for ongoing maintenance.
Installation Steps:
- Plumb into 2-inch Return Line: Integrate the salt cell into your pool's 2-inch return line plumbing. Ensure secure connections to prevent leaks.
- Connect to EC-521105 Power Center: Connect the cell to a compatible EC-521105 power center (not included).
- Set Output Level: Once connected, set the desired chlorine output level using the controls on the unit or power center.
Image: A visual guide illustrating the three-step installation process for the Aqualix IC60 Salt Cell. Steps include plumbing the unit into the 2-inch return line, connecting it to the EC-521105 power center, and setting the chlorine output level.
How the Salt Chlorination Cell Works:
The salt chlorination process involves a continuous cycle:
- Saltwater enters the cell.
- Electrolysis converts salt into pure chlorine.
- Chlorinated water returns to the pool.
- Chlorine reverts to salt, and the cycle repeats.
Image: A diagram depicting the operational flow of a salt chlorination cell within a pool system. It illustrates how saltwater enters the cell, is converted to chlorine, which then sanitizes the pool water before reverting to salt to restart the cycle.
3. Operating Instructions
The Aqualix IC60 Salt Cell provides clear LED indicators and an easy-to-read display for monitoring system status. You can view the salt level, chlorine output, water flow, and overall system status at a glance. When connected to a compatible EC-521105 power center, you can fine-tune the chlorine output using simple push-button controls.
Image: The display panel of the Aqualix IC60 Salt Cell, showing various indicators for system status including connection status, flow rate level, salt level, and temperature range. It also illustrates the 'LESS', 'MORE', and 'BOOST ON/OFF' buttons for control.
Video Guides:
Operation Guide for Salt Chlorine Machine
Video: This video provides a detailed guide on the general operation of the Aqualix Salt Chlorine Machine, demonstrating how to use its features and settings.
How to Connect the Salt Chlorine Machine to WiFi
Video: A step-by-step tutorial on connecting your Aqualix Salt Chlorine Machine to a WiFi network for remote monitoring and control.
How to Download and Use the APP
Video: This video demonstrates the process of downloading and effectively using the mobile application to manage your Aqualix Salt Chlorine Generator.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Aqualix IC60 Salt Cell. While no special cleaning kit is required, it is important to follow normal salt cell cleaning steps to prevent scale buildup.
General Cleaning Guidelines:
- Inspect Regularly: Periodically inspect the salt cell for any visible signs of scale buildup on the titanium blades.
- Acid Wash (if necessary): If scale buildup is observed, perform an acid wash according to standard pool equipment maintenance practices. Always dilute muriatic acid with water and follow safety precautions.
- Rinse Thoroughly: After cleaning, rinse the cell thoroughly with fresh water before reinstallation.
- Check O-Rings: Ensure O-rings are clean and properly seated to maintain a watertight seal. Replace if cracked or worn.
5. Troubleshooting
The Aqualix IC60 Salt Cell features an improved flow sensor designed to reduce common issues such as false "low salt" or "no flow" alerts. However, if you encounter problems, refer to the following common issues and their solutions:
Image: A table outlining common problems encountered with IC60 replacement cells and the corresponding improvements or fixes implemented in this product. Issues addressed include frequent 'Low Salt' alarms, high-temperature display ghosting, and early cell failure or leaks.
Common Issues and Solutions:
| Issue | Possible Cause / Solution |
|---|---|
| Frequent "Low Salt" Alarms | Check actual salt level with a test kit. Ensure proper water flow. The Aqualix IC60 uses new formula cell plates and sensor calibration tests to reduce false alarms. |
| High-Temperature Display Ghosting | This unit features a high-temp rated display and improved shielding to prevent ghosting. If it occurs, ensure the unit is not exposed to extreme direct sunlight or heat sources. |
| Early Cell Failure & Leaks | The Aqualix IC60 incorporates upgraded seals, titanium hardware, and standardized quality control to enhance durability. Ensure proper installation and regular maintenance. Check for physical damage or improper union connections. |
| No Chlorine Output | Verify power supply to the unit and power center. Check salt level. Ensure adequate water flow through the cell. Inspect cell for heavy scale buildup. |
6. Specifications
| Feature | Detail |
|---|---|
| Model | IC60 Salt Cell Replacement |
| Compatibility | Fits for Pentair IntelliChlor IC60 salt cell and EC-521105 / 521105 IntelliChlor power center |
| Pool Size Capacity | Up to 60,000 gallons (inground pools) |
| Pipe Size | 2-inch unions |
| Cell Material | Titanium blades with ruthenium coating |
| Flow Sensor | Improved flow sensor |
| Housing | Rugged, UV, corrosion, and heat resistant |
| Display | Clear LED indicators and easy-to-read display (salt level, chlorine output, water flow, system status) |
| Item Weight | 6.5 Pounds |
Image: A summary graphic detailing the technical specifications of the Aqualix IC60 salt cell replacement, including its model designation, required input (Pentair EC-521105 power), suitable pool size (up to 60,000 gallons), pipe size (2-inch unions), and application (inground salt water pool systems).
7. Warranty Information
The Aqualix IC60 Salt Cell Saltwater Chlorine Generator is backed by a 3-Year Warranty. This warranty provides peace of mind regarding the product's durability and performance. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact customer support.
Image: The Aqualix IC60 Salt Cell, emphasizing its reinforced titanium cell plates with ruthenium coating, upgraded flow sensor, and leak-resistant seals. A prominent badge indicates a '3-Year Warranty' for the product.
8. Customer Support
For any questions regarding sizing, installation, operation, or troubleshooting of your Aqualix IC60 Salt Cell, our dedicated customer support team is available to assist you. We aim to provide responsive support and answer inquiries within 24 hours.
Please refer to the contact information provided in your product packaging or visit the official Aqualix website for further assistance.