ONBRILL 55-Inch Round Record Player Stand with Charging Station

Introduction

Thank you for choosing the ONBRILL 55-Inch Round Record Player Stand with Charging Station. This manual provides essential information for the safe assembly, proper operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The ONBRILL 55-inch Round Record Player Stand in Oak finish, showcasing its design and functionality.

Safety Information

To ensure safe use and prevent damage, please adhere to the following guidelines:

• Anti-Tip Device: This cabinet is equipped with anti-tip parts. Always install these as instructed to prevent accidental tipping, especially in households with children and pets.
• Weight Capacity: Do not exceed the maximum weight capacity of 150 pounds (68 kg) on the tabletop or shelves. Distribute weight evenly.
• Assembly: Follow all assembly instructions precisely. Incorrect assembly can lead to instability and potential injury.
• Placement: Place the stand on a flat, stable surface. Avoid placing it in areas with high humidity or direct sunlight.
• Electrical Safety: When using the charging station, ensure all devices and cables are in good condition. Do not overload the outlets.

Package Contents

Before assembly, verify that all components listed in the included parts list are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

• Wooden Panels (various sizes)
• Metal Legs
• Hardware Pack (screws, dowels, cam locks, etc.)
• Charging Station Unit
• Metal Record Dividers
• Anti-Tip Kit
• Assembly Instructions Manual

Setup and Assembly

Assembly of the ONBRILL Record Player Stand requires following the step-by-step instructions provided in the separate assembly guide included in your package. Ensure you have adequate space and the necessary tools (typically a screwdriver) before starting.

Key Assembly Steps:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify each part using the numbered labels and the assembly diagram.
3. Assemble the main frame of the stand according to the sequence in the manual.
4. Install the sliding tambour doors into their tracks.
5. Attach the metal legs securely to the base.
6. Integrate the charging station unit into the designated cutout on the tabletop.
7. Install the metal record dividers in the lower compartments.
8. Secure the anti-tip device to the back of the stand and to a wall stud.

Assembly Video:

For a visual guide to the assembly process, please refer to the official installation video below:

Image: Detailed product dimensions for the 55-inch record player stand.

Operating Instructions

Using the Charging Station:

The integrated charging station provides convenient power access for your devices. It includes:

• 2 Standard AC Power Outlets (125V-12A)
• 1 USB Port (5V-2A)
• 1 Type-C Port (5V-2A)

Simply plug your record player, speakers, or other electronic devices into the appropriate outlets. The 4.9-foot power cord allows for flexible placement near a wall outlet.

Image: The integrated charging station with various ports, shown with a tablet connected for charging.

Sliding Tambour Doors:

The cabinet features curved sliding tambour doors. To open or close, gently slide the doors along their tracks. These doors allow you to conceal or display your vinyl collection and other items as desired.

Image: The record player stand demonstrating the functionality of its sliding tambour doors, both closed and open.

Vinyl Record Storage:

The lower compartments are designed with metal dividers to organize and protect your vinyl records. These dividers help keep records upright, preventing shifting and damage. The stand can accommodate over 300 vinyl records.

Image: Detail of the metal dividers for vinyl record storage and the wire outlet for cable management.

Cable Management:

The back panel features cable management ports to help organize and conceal tangled cables from your electronic devices, maintaining a neat appearance.

Maintenance

To maintain the appearance and longevity of your ONBRILL Record Player Stand, follow these simple care instructions:

• Cleaning: Wipe the surface clean effortlessly with a dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Dusting: Regularly dust the stand to prevent buildup.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood finish.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Keep the stand away from excessive moisture or direct heat sources.

Troubleshooting

If you encounter any issues with your record player stand, consider the following common solutions:

• Wobbly Stand: Ensure all screws and fasteners are tightened. If the floor is uneven, adjust the leveling feet (if present) or place shims under the legs.
• Sliding Doors Sticking: Over time, the sliding mechanism might become less smooth. Clean the tracks to remove any dust or debris. A small amount of silicone-based lubricant (not WD-40) can be applied to the tracks if needed, but test in an inconspicuous area first.
• Charging Station Not Working: Check if the power cord is securely plugged into a wall outlet. Ensure the wall outlet is functional. Test with different devices. If issues persist, contact customer support.
• Missing Parts: If you discover missing parts during assembly, refer to the package contents section and contact ONBRILL customer support with your purchase details.

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official ONBRILL website. If you require further assistance, have questions about assembly, or need to report a defect, please contact ONBRILL customer support directly.

Customer Support: Refer to your purchase receipt or the ONBRILL brand store for contact information.