Introduction
Thank you for choosing the VINGLI 15.7"W-1 Drawer Black Nightstand Set. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new nightstands. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
Always assemble with care, following the provided instructions. Keep liquids away from the table to prevent damage. Ensure the table is properly installed and stable to prevent tipping. Do not exceed the maximum weight recommendation of 55 pounds.
Package Contents
Before assembly, verify that all components listed in the included Assembly Guide are present and undamaged. The package typically includes:
- Nightstand panels (top, bottom, sides, back, drawer front)
- Solid pine wood legs
- Drawer slides and hardware
- Metal handle
- Assembly hardware (screws, dowels, cam locks, etc.)
- Assembly Guide
A screwdriver is recommended for assembly.
Setup and Assembly Instructions
Assembly is required for this nightstand set. Please refer to the detailed Assembly Guide included in your package for step-by-step instructions. Ensure you have adequate space and the recommended tools (e.g., screwdriver) before starting.
Key Assembly Points:
- Solid Wood Legs: Attach the four solid pine wood legs securely to the base of the nightstand using the provided stability plus mount plates.
- Drawer Assembly: Carefully assemble the drawer components, ensuring the metal full-extension silent slides are installed correctly for smooth operation.
- Fluted Drawer Front: Attach the fluted drawer front and the long gold metal handle as indicated in the guide.
- Stability: After assembly, gently test the nightstand for stability. Adjust legs if necessary to ensure it sits level on the floor.
Image: Detailed specifications including dimensions (15.75"W x 11.81"D x 21.85"H) and weight capacities (top 44 lbs, drawer 11 lbs).
Image: Close-up details of the nightstand's construction, highlighting the spacious drawer, solid back-up plate for leg stability, protective leg pads, and a back mending wedge for structural integrity.
Operating Instructions
Drawer Operation:
The nightstand features a full-extension drawer with silent slides for smooth and quiet operation. To open, gently pull the metal handle. To close, push the drawer back until it fully retracts. The soft-close mechanism prevents slamming.
Image: A detailed view of the metal full-extension silent drawer slide, illustrating its smooth and quiet operation compared to partial pull-out or easily detached drawers.
Weight Capacity:
The maximum weight recommendation for the nightstand is 55 pounds (25 kg). Do not overload the top surface or the drawer to ensure stability and longevity of the product.
Maintenance
Cleaning:
The nightstand features a thoughtful waterproof surface, making it easy to clean. Wipe spills immediately with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
Image: A hand wiping a liquid spill from the nightstand's surface, demonstrating its waterproof and easy-to-clean feature.
General Care:
- Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Avoid placing hot items directly on the surface without a protective coaster.
- Keep the nightstand away from direct sunlight and extreme temperature changes to prevent warping or fading.
Troubleshooting
Wobbly Nightstand:
If the nightstand feels wobbly after assembly, ensure all leg screws and frame connections are securely tightened. Check if the floor surface is even. Small felt pads can be added to the bottom of the legs to compensate for uneven floors.
Sticky or Misaligned Drawer:
If the drawer does not slide smoothly, check that the drawer slides are correctly installed and aligned on both the drawer and the nightstand frame. Ensure no debris is obstructing the slide mechanism. Refer to the Assembly Guide for correct slide orientation.
Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model Name | Nightstand |
| Model Number | N01DBS2 |
| Product Dimensions | 11.81"D x 15.75"W x 21.85"H |
| Item Weight | 29.3 Pounds (per nightstand) |
| Maximum Weight Recommendation | 55 Pounds |
| Frame Material | Engineered Wood |
| Color | Black |
| Number of Drawers | 1 |
| Furniture Leg Material | Pine Wood |
| Special Features | Full-Extension Drawer, Grooved Drawer Front, Solid Wood Legs |
| Assembly Required | Yes |
| Included Components | Assembly Guide |
Warranty
This VINGLI nightstand set comes with a 1-year quality warranty from the manufacturer. Please retain your proof of purchase for any warranty claims. For specific details regarding warranty coverage and procedures, refer to the documentation included with your product or contact VINGLI customer support.
Support
If you encounter any issues during assembly or use, or if you have questions not covered in this manual, please refer to the contact information provided in your Assembly Guide or on the VINGLI official website. Our customer support team is available to assist you.