Baseus PicoGo AM52 10000mAh Qi2.2 MagSafe Power Bank User Manual

1. Introduction

Thank you for choosing the Baseus PicoGo AM52 10000mAh Qi2.2 MagSafe Power Bank. This device provides portable, high-speed charging for your mobile devices. Please read this manual carefully before use to ensure proper operation and safety.

2. What's in the Box

• 1x Baseus Qi2.2 MagSafe Power Bank 10 000 mAh
• 1x USB-C Charging Cable
• 1x User Manual

3. Product Features

• Officially Qi2.2 Certified: Ensures compatibility and optimal wireless charging performance.
• 25W Ultra-Fast Wireless Charging: Delivers high-speed wireless power, charging compatible iPhones (16-17 series with iOS 26) up to 45% in 30 minutes. iPhones 12-15 series support 15W wireless charging.
• Strong Magnetic Attachment: Features 16 built-in N52 magnets for a secure and stable connection to MagSafe-compatible devices.
• 45W Wired Fast Charging: The USB-C port provides up to 45W output for rapid charging of smartphones, tablets, and other compatible devices.
• 30W Power Bank Self-Charging: Recharges the 10,000 mAh power bank in approximately 1.5 hours using a 30W USB-C input.
• Triple Cooling System: Incorporates a graphite thermal conductive layer, aluminum alloy body, and AI temperature monitoring to ensure stable and safe charging by dissipating heat efficiently.
• Simultaneous Dual Device Charging: Charge two devices concurrently via the USB-C port and the Qi2.2 wireless pad.
• Compact and Portable Design: Ergonomically designed with curved edges, a soft silicone surface, and a durable aluminum alloy casing for easy portability.

Image: Illustration of Qi2.2 25W wireless charging technology.

Image: Visual representation of 45W USB-C wired fast charging in progress.

Image: Diagram explaining the triple cooling system for enhanced charging safety and efficiency.

4. Setup

1. Initial Charge: Before first use, fully charge the power bank using the provided USB-C cable and a compatible power adapter (not included). The LED indicators will show charging progress.
2. Check Battery Level: Press the power button once to check the current battery level indicated by the LED lights.

5. Operating Instructions

5.1 Wireless Charging (MagSafe Compatible)

1. Ensure your device is MagSafe compatible (iPhone 12 series or newer).
2. Align the back of your device with the magnetic charging area on the power bank. The magnets will snap into place, and charging will begin automatically.
3. The power bank will automatically switch off when your device is fully charged or disconnected.

5.2 Wired Charging (USB-C)

1. Connect one end of the USB-C charging cable to the USB-C port on the power bank.
2. Connect the other end of the cable to your device's charging port.
3. Charging will begin automatically. The power bank will automatically switch off when your device is fully charged or disconnected.

5.3 Recharging the Power Bank

1. Connect the provided USB-C cable to the power bank's USB-C port.
2. Connect the other end of the cable to a USB-C power adapter (e.g., a 30W PD charger) and plug it into a wall outlet.
3. The LED indicators will flash to show charging status and remain solid when fully charged.

6. Safety Information

• Do not expose the power bank to extreme temperatures, direct sunlight, or water.
• Avoid dropping or subjecting the power bank to strong impacts.
• Do not disassemble, repair, or modify the device.
• Keep out of reach of children.
• Use only certified charging cables and adapters.
• If the power bank swells, overheats, or shows any other abnormal behavior, discontinue use immediately.

7. Troubleshooting

• Device not charging wirelessly: Ensure your device is MagSafe compatible and properly aligned. Check for any obstructions between the power bank and your device.
• Device not charging via USB-C: Verify that the cable is securely connected to both the power bank and your device. Try a different cable or device to rule out cable issues.
• Power bank not recharging: Ensure the USB-C cable and power adapter are functioning correctly. Check if the power adapter meets the required specifications (e.g., 30W for fast self-charging).
• Slow charging: Ensure you are using a compatible fast-charging cable and adapter. For wireless charging, confirm your device supports Qi2.2 and is running the latest iOS version (for iPhones).

8. Specifications

Image: Detailed compatibility chart for various devices with the power bank's wireless and wired charging capabilities.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service, please refer to the official Baseus website or contact your local retailer. Keep your purchase receipt for warranty claims.