1. Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 800 lbs for seating.
- Storage Capacity: Do not overload the 40-gallon storage compartment.
- Assembly: Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Placement: Place the bench on a flat, stable surface to prevent tipping.
- Weather Exposure: While designed for outdoor use, prolonged exposure to heavy rain or extreme weather conditions should be avoided to extend product life. The internal liner provides protection for stored items, but is not fully waterproof.
- Children: Supervise children around the bench, especially when the storage lid is open, to prevent accidents.
2. Package Contents
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Patio Storage Bench Frame
- 1 x Seat Cushion
- 1 x Internal Storage Liner
- 1 x Assembly Instruction Manual
- Hardware Pack (bolts, washers, Allen key)

Figure 2.1: All included components for the storage bench.
3. Setup (Assembly Instructions)
Assembly is required. It is recommended to have two people for easier and quicker assembly. Please follow these steps carefully.
3.1 Unpacking and Preparation
- Remove all components from the packaging.
- Lay out all parts on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches.
- Identify all hardware and components using the parts list in the instruction manual.
3.2 Assembling the Frame
- Attach the side frames to the base frame using the provided bolts and Allen key. Do not fully tighten bolts until all components are loosely assembled.
- Connect the backrest panel to the side frames. Ensure the rattan weaving is facing outwards.
- Secure the lid support mechanism (gas strut) to the designated points on the frame and lid. Refer to the detailed diagrams in the included instruction manual for precise placement.
- Once all parts are in place, gradually tighten all bolts evenly until secure. Avoid over-tightening.

Figure 3.1: Product dimensions for assembly reference.

Figure 3.2: Details of the rattan weaving and metal frame construction.
3.3 Installing the Liner and Cushion
- Place the internal storage liner inside the bench compartment. Ensure it fits snugly and the zipper is accessible.
- Position the seat cushion on top of the bench. Use the attached fixing ties to secure the cushion to the bench frame, preventing it from sliding.
4. Operating Instructions
4.1 Using the Bench for Seating
The Tangkula Outdoor Storage Bench is designed to comfortably seat up to two people. The 43.5-inch wide seat and 105-degree inclined backrest provide ergonomic support. Ensure the storage lid is fully closed before sitting.

Figure 4.1: Bench in use as outdoor seating.
4.2 Accessing the Storage Compartment
The bench features a 40-gallon storage compartment for outdoor essentials. To access:
- Remove the seat cushion.
- Lift the bench lid. The gas strut mechanism will assist in holding the lid open securely.
- Place or retrieve items from the internal storage liner. The liner can be zipped closed for added protection.
- Gently close the lid, ensuring it latches properly. Replace the seat cushion.

Figure 4.2: Storage compartment open, showing capacity.

Figure 4.3: Demonstrating the 2-in-1 versatile design.

Figure 4.4: Features of the 40-gallon storage compartment.

Figure 4.5: Details of the comfortable cushioned seat.
5. Maintenance
5.1 Cleaning the Rattan and Frame
- Wipe the PE rattan and metal frame with a soft cloth dampened with mild soap and water.
- Rinse thoroughly with clean water and dry completely to prevent water spots or rust.
- Avoid using harsh chemicals, abrasive cleaners, or stiff brushes, as these can damage the finish.
5.2 Cushion Care
- The cushion cover is removable and features a zipper for easy cleaning.
- Hand wash or machine wash the cover on a gentle cycle with cold water and mild detergent. Air dry only; do not tumble dry.
- Store cushions indoors during inclement weather or prolonged periods of non-use to maintain their appearance and extend their lifespan.
5.3 Storage Liner Care
- Periodically empty and wipe down the internal storage liner to remove any dirt or debris.
- Ensure the liner is dry before zipping it closed to prevent mold or mildew growth.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bench feels unstable or wobbly. | Loose bolts or uneven surface. | Check and tighten all assembly bolts. Ensure the bench is placed on a flat, level surface. |
| Storage lid does not stay open. | Gas strut not properly installed or damaged. | Verify the gas strut is correctly attached according to assembly instructions. If damaged, contact customer support for a replacement. |
| Water inside storage liner. | Liner zipper not closed, or prolonged heavy rain exposure. | Ensure the liner zipper is fully closed. While the liner offers protection, it is not fully waterproof. Consider placing the bench under a covered area during heavy rainfall. |
| Cushion slides off the bench. | Fixing ties not secured. | Use the attached ties to secure the cushion to the bench frame. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | AM11082HM |
| Overall Dimensions (L x W x H) | 24.5" x 46" x 33.5" |
| Inner Storage Box Size (L x W x H) | 41" x 19" x 12" |
| Seat Height from Ground | 17.5" |
| Cushion Dimensions (L x W x Thickness) | 43.5" x 20.5" x 2.5" |
| Weight Capacity | 800 lbs |
| Storage Capacity | 40 Gallons |
| Net Weight | 37.5 lbs |
| Materials | PE Rattan, Metal, Polyester, Sponge |
| Color | Black & Beige |
| Assembly Required | Yes |
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Tangkula website. Please have your model number (AM11082HM) and purchase date available when contacting support.


