User's Manual: 2-Seat Swing

Parts List

Assembly Instructions

1. Step 1: Attach the main frame supports (A) to the seat support bar (B) using bolts (2) and nuts (15). Insert springs (1) into the designated slots on the main frame supports.
2. Step 2: Connect the leg frames (C and D) to the main frame assembly using bolts (3), washers (13), and nuts (14). Ensure the leg frames are securely fastened.
3. Step 3: Attach the seat frames (E) to the leg frames using bolts (5) and nuts (15).
4. Step 4: Mount the backrest support (F) and armrest support (G) to the seat frames using bolts (7) and nuts (15).
5. Step 5: Slide the canopy fabric (K) onto the canopy support bars (I and J). Attach the assembled canopy structure to the top of the frame using bolts (4) and nuts (15).
6. Step 6: Place the seat cushions (H and L) and armrest cushions (P) onto the seat frames.
7. Step 7: Attach the storage table (M) with cup holder (N) and cooler bag (O) to the center of the swing using bolts (6) and nuts (15).
8. Step 8: Secure the pivot storage table (Q) to the designated armrest using bolt (9) and washers (10, 11, 12) and nuts (15).
9. Step 9: Ensure all bolts and nuts are tightened securely using the provided wrench (16).

Safety Information

• Read all instructions before assembly and use.
• Assemble on a soft, level surface to avoid scratching.
• Do not overtighten bolts, as this may damage the frame.
• Periodically check all fittings and tighten as necessary.
• Maximum weight capacity: [Specify weight capacity if known, otherwise omit or state 'Refer to product packaging'].
• Keep children away from the assembly area.
• Do not use the swing if any parts are missing or damaged.