1. Product Overview
The Bellemave Queen Over Queen Bunk Bed is designed for versatile use in various room settings, including children's rooms, adult bedrooms, dorms, or guest rooms. This bed features a sturdy construction of pine wood and MDF, ensuring durability and stability. Its design allows for use as a stacked bunk bed or can be detached into two separate queen-sized platform beds, offering flexibility to suit your space and needs. The lower bunk is designed close to the floor, enhancing safety for younger users. Full-length guardrails and an inclined ladder are integrated for secure access and use.
Image 1.1: Fully assembled Bellemave Queen Over Queen Bunk Bed in white finish.
2. Safety Information
- Guardrails: Always ensure guardrails are securely installed on the upper bunk to prevent falls.
- Ladder Use: Use the inclined ladder for entering and exiting the upper bunk. Do not jump on or off the bunk bed.
- Weight Capacity: The bunk bed is designed to support a maximum weight of 650 lbs. Distribute weight evenly.
- Mattress Thickness: For the upper bunk, a mattress thickness of approximately 6 inches is recommended to maintain adequate guardrail height.
- Age Recommendation: The upper bunk is not suitable for children under 6 years of age.
- Ventilation: Ensure adequate ventilation around the bed.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight.
3. Package Contents
Your Bellemave Queen Over Queen Bunk Bed will arrive in two separate packages. Please ensure both packages are received before beginning assembly. Carefully unpack all components and verify against the parts list provided in the separate assembly instructions document.
Key Components Included:
- Headboards
- Footboards
- Side Rails
- Guardrails
- Ladder
- Slats for both upper and lower beds
- Hardware (screws, bolts, nuts, etc.)
4. Setup and Assembly Instructions
Assembly of the Bellemave Queen Over Queen Bunk Bed is required. A detailed step-by-step assembly guide with diagrams is included in your package. Please follow these instructions carefully to ensure correct and safe assembly.
General Assembly Tips:
- Preparation: Clear a spacious area for assembly. Lay out all parts and hardware.
- Tools: A powered screwdriver can significantly reduce assembly time. Ensure you have the necessary hand tools as specified in the assembly guide.
- Teamwork: Assembly is easier and safer with two people.
- Tighten Securely: Ensure all bolts and screws are tightened securely, but do not overtighten to avoid damaging the wood.
- Detachable Feature: This bunk bed can be assembled as a single stacked unit or as two independent queen-sized platform beds. Refer to the specific sections in your assembly guide for instructions on each configuration.
Image 4.1: The bunk bed can be separated into two individual queen beds.
Image 4.2: Detail of the wooden slats and frame support.
5. Operating Instructions (Usage)
Using the Bunk Bed:
- Sleeping: The bunk bed provides two queen-sized sleeping surfaces. Ensure mattresses are properly placed on the slats.
- Ladder Access: Use the inclined ladder to safely access the upper bunk. Always face the ladder when climbing up or down.
- Detached Beds: If configured as two separate beds, ensure they are placed on a flat, stable surface.
Image 5.1: The bunk bed ready for use with mattresses and bedding.
6. Maintenance
- Cleaning: Wipe down the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any that have become loose to maintain structural integrity and safety.
- Wood Care: Protect the wood from extreme temperature changes and direct sunlight to prevent warping or fading.
7. Troubleshooting
Common Issues and Solutions:
- Wobbly Frame: If the bed feels unstable, re-check all connections and ensure all bolts are fully tightened. Ensure the bed is on a level surface.
- Difficulty Assembling: Refer to the detailed assembly instructions. Ensure all parts are correctly oriented and that you are using the correct hardware for each step. If a part seems ill-fitting, double-check the part number against the manual.
- Damaged or Missing Parts: If you receive damaged or missing components, do not proceed with assembly. Contact customer support immediately for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | Queen Over Queen Bunk Bed |
| Size | Queen over Queen |
| Product Dimensions (L x W x H) | 84.6" x 63.5" x 58.3" |
| Material | Pine Wood & MDF |
| Color | White Ladder |
| Special Feature | Detachable |
| Included Components | Guardrails, Headboard, Slats |
| Compatible Mattress Size | Queen |
| Item Weight | 78 pounds |
| Assembly Required | Yes |
| UPC | 810212247625 |
Image 8.1: Dimensional drawing of the bunk bed (Note: Image shows Full XL over Queen, but dimensions are representative of the Queen over Queen model's structure).
9. Warranty Information
For detailed information regarding the product warranty, including coverage, terms, and conditions, please contact Bellemave customer support directly. Keep your proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact our customer support team:
- Email: US-VC@bellemavehome.com
Please provide your model number and purchase date when contacting support for faster service.
