Amzfast 34 Inch UltraWide Curved Gaming Monitor AMZG34C8 User Manual

1. Product Overview

The Amzfast AMZG34C8 is a 34-inch UltraWide Curved Gaming Monitor designed to provide an immersive visual experience with high performance. It features a UWQHD (3440x1440) resolution, a 200Hz refresh rate, and a 1ms response time, making it suitable for gaming and professional use. The 1500R curvature enhances immersion, while features like PIP/PBP and adjustable stand offer versatility.

Figure 1: Amzfast 34 Inch UltraWide Curved Gaming Monitor AMZG34C8.

2. Package Contents

Before setup, please verify that all items listed below are included in your package:

• Monitor x 1
• Base x 1
• Adaptor x 1
• DP Cable (1.5m) x 1
• HDMI Cable (1.5m) x 1
• Quick Start Guide x 1
• User Manual x 1

Figure 2: Illustration of package contents and monitor dimensions.

3. Setup Instructions

3.1 Assembling the Stand

1. Carefully remove the monitor from its packaging, keeping it protected on a soft, flat surface.
2. Attach the stand base to the stand neck using the provided screws.
3. Align the assembled stand with the mounting points on the back of the monitor and secure it firmly.

The monitor also supports 100mm x 100mm VESA mounting for alternative installation options.

Figure 3: The monitor stand offers Tilt (-5°~22°), Swivel (L30°, R30°), Pivot (±5°), and Height Adjustment (0-130mm).

3.2 Connecting to Devices

The monitor provides multiple connectivity options:

• HDMI 2.1 x 2: Supports up to 200Hz refresh rate.
• DisplayPort 1.4 x 1: Supports up to 200Hz refresh rate.
• Earphone Jack x 1: For audio output.
• DC Power Input x 1: For power adapter connection.

Use the provided HDMI or DisplayPort cables to connect your computer or gaming console to the monitor. Ensure the power adapter is securely connected to the DC input and a power outlet.

Figure 4: Available input and output ports on the monitor.

4. Operating Instructions

4.1 Power On/Off and OSD Navigation

The monitor features a 5-way gaming joystick for intuitive control of the On-Screen Display (OSD) menu. Press the joystick to power on/off the monitor, and move it in different directions to navigate through the OSD options.

4.2 Display Modes and Features

• PIP (Picture-in-Picture) / PBP (Picture-by-Picture): This technology allows you to display content from two different signal sources simultaneously. PIP shows one source in a smaller window over another, while PBP divides the screen to show both sources side-by-side. To use, ensure both HDMI and DP ports are connected to signal sources.
• Adaptive Sync: Compatible with both AMD FreeSync Premium and G-SYNC, this feature synchronizes the monitor's refresh rate with your GPU's frame rate to eliminate screen tearing and stuttering, providing smoother gameplay.
• AI Picture Quality (AI PQ): Enhances image clarity and detail.
• AI Dynamic Blue Light (AI DBL): Reduces harmful blue light emissions to protect your eyes.

Figure 5: PIP and PBP modes allow for multi-source display. Both HDMI and DP signals must be connected simultaneously for these features.

Figure 6: Visual comparison of Adaptive Sync (G-SYNC/FreeSync) enabled versus disabled, showing reduced screen tearing.

4.3 Gaming Assist Modes

The OSD menu includes several features to enhance your gaming experience:

• AI Crosshair: Provides an on-screen crosshair for improved aiming accuracy.
• Night Vision: Adjusts display settings to enhance visibility in dark in-game environments.
• Sniper Scope: Magnifies a specific area of the screen for precise targeting.

Figure 7: Examples of AI Crosshair and Night Vision features in action.

5. Maintenance

5.1 Cleaning the Monitor

To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, dampen the cloth with a small amount of water or a mild, non-abrasive screen cleaner. Avoid using alcohol-based cleaners or harsh chemicals, as these can damage the screen surface. For the monitor casing, use a soft, dry cloth.

5.2 Cable Management

The monitor stand includes a cable management solution to keep your desk tidy. Route cables through the designated opening in the stand to reduce clutter and prevent damage.

6. Troubleshooting

If you encounter any issues with your Amzfast monitor, please refer to the following common solutions:

• No Power: Ensure the power adapter is securely connected to both the monitor and a working power outlet. Check if the power indicator light on the monitor is on.
• No Signal: Verify that the video cables (HDMI or DisplayPort) are correctly connected to both the monitor and your source device (PC, console). Ensure the correct input source is selected in the OSD menu.
• Flickering or Distorted Image: Check cable connections. Try a different video cable or port. Ensure your graphics card drivers are up to date. If Adaptive Sync is enabled, try disabling it to see if the issue persists.
• Incorrect Resolution or Refresh Rate: Adjust the display settings in your operating system to the recommended UWQHD (3440x1440) resolution and 200Hz refresh rate.
• Stand Adjustments Not Working: Ensure all locking mechanisms on the stand are disengaged before attempting to adjust tilt, swivel, pivot, or height.

If the problem persists after trying these steps, please contact Amzfast customer support for further assistance.

7. Specifications

8. Warranty and Support

The Amzfast AMZG34C8 monitor comes with a 1 Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use during the warranty period.

For warranty claims, technical support, or any inquiries, please contact Amzfast customer service through their official website or the contact information provided in your product packaging. Please have your model number (AMZG34C8) and proof of purchase ready when contacting support.