VASAGLE Custos Collection Chest of Drawers Instruction Manual

1. Introduction

Thank you for choosing the VASAGLE Custos Collection Chest of Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

To ensure safe use of this product, please observe the following guidelines:

• Anti-Tip Device: It is crucial to install the included anti-tip device to prevent the chest from tipping over, especially in households with children. Securely fasten the device to a solid wall stud according to the assembly instructions.
• Weight Limits: Do not exceed the maximum weight capacity for the top surface (75 kg) or individual drawers (10 kg). Overloading can compromise stability and cause damage.
• Assembly: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten all connections.
• Placement: Place the chest on a level surface to ensure stability. Avoid placing it in areas with high humidity or direct sunlight, which can damage the material.

3. Package Contents

Before assembly, please verify that all components listed below are present and undamaged:

• 1 x Chest of Drawers (main furniture unit)
• 1 x Anti-tip kit (for wall mounting)
• 1 x Accessory pack (containing all necessary hardware)
• 1 x Instruction Manual (this document)

If any parts are missing or damaged, please contact customer support immediately.

4. Setup and Assembly Instructions

Assembly of the VASAGLE Custos Collection Chest of Drawers is designed to be straightforward. Follow the step-by-step instructions provided in the included illustrated guide.

1. Unpack: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: All parts are labeled for easy identification. Refer to the parts list in the separate assembly guide to ensure you have everything.
3. Follow Illustrated Steps: Proceed with assembly according to the detailed, illustrated instructions. Pay close attention to the orientation of each piece.
4. Secure Fasteners: Ensure all screws, dowels, and other fasteners are fully tightened. Do not overtighten to avoid damaging the material.
5. Install Anti-Tip Device: Once the chest is fully assembled and in its desired location, install the anti-tip device to the wall as instructed. This is a critical safety step.

5. Operating Instructions (Usage)

This chest of drawers is designed for organized storage in various rooms.

• Drawer Usage: The chest features six drawers of varying depths. The upper drawers are suitable for smaller items like underwear and socks, while the deeper drawers can accommodate heavier clothing or light blankets.
• Smooth Operation: The drawers are equipped with high-quality gliding rails for smooth and effortless opening and closing. Avoid forcing drawers if they feel stiff.
• Versatile Placement: This modern chest can function as a sideboard in a dining room, a storage cabinet in a living room, or a dresser in a bedroom.

6. Maintenance

Proper care will extend the life and appearance of your furniture:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood chipboard and MDF.
• Inspection: Periodically check all fasteners and connections to ensure they remain tight. Re-tighten if necessary.
• Avoid Heat and Moisture: Keep the chest away from direct heat sources, radiators, and areas of high humidity to prevent warping or discoloration.

7. Troubleshooting

If you encounter any issues with your chest of drawers, consider the following:

• Drawers not sliding smoothly: Check if the drawer rails are correctly aligned and free from obstructions. Ensure all screws on the rails and drawer boxes are tight.
• Unit feels unstable: Verify that the chest is placed on a level surface. Confirm that the anti-tip device is properly installed and secured to the wall. Re-tighten all assembly screws.
• Parts do not fit: Double-check the assembly instructions to ensure you are using the correct parts for each step and that they are oriented correctly. Do not force parts together.

For persistent issues or further assistance, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the purchase documentation or contact your retailer. If you have any questions regarding assembly, missing parts, or product functionality, please reach out to VASAGLE customer service through their official website or the platform where the product was purchased.